Ventique60e/BuildTips - Revision history

FlexTeam at 20:53, 29 November 2017

2017-11-29T20:53:39Z

2017-03-29T02:12:36Z

2017-03-29T01:36:37Z

2016-08-09T16:13:01Z

2016-08-09T16:12:28Z

2016-08-09T16:10:37Z

2016-08-09T16:09:39Z

2016-08-09T16:08:49Z

2016-08-09T16:07:02Z

2016-08-09T16:05:58Z

@@ Line 13: / Line 13: @@
 *'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']
+*When using the new '''"T" Spektrum Receivers''' such as the AR8010T, the Aura '''MUST be updated''' via Aura Config Tool to '''Firmware 1.4''' to establish connection via SRXL as noted on our AR8010T page.
 <noinclude>
 [[Category:ARF+ARFSV|ARF + ARFSV]]
 [[Category:Ventique60e|Ventique 60e]]
 </noinclude>

← Older revision		Revision as of 02:12, 29 March 2017
Line 14:		Line 14:
	*'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']		*'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']

−	<noinclude>[[Category:Ventique60e\|Ventique 60e]]</noinclude>	+	<noinclude>
		+	[[Category:ARF+ARFSV\|ARF + ARFSV]]
		+	[[Category:Ventique60e\|Ventique 60e]]
		+	</noinclude>

← Older revision		Revision as of 01:36, 29 March 2017
Line 13:		Line 13:

	*'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']		*'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']
		+
		+	<noinclude>[[Category:Ventique60e\|Ventique 60e]]</noinclude>

@@ Line 9: / Line 9: @@
 **Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have significant vibration feedback into the gyro sensors.
 **The Aura Config File for the Ventique can be easily built in the ''New Aura Config File'' "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
 ***Alternately, you can [[Aura/ConfigFiles#Ventique_60e_Aura_Config_Files_with_Rx_Auto_Detect| Download a Ventique .acf file]]
 *'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']

@@ Line 9: / Line 9: @@
 **Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have significant vibration feedback into the gyro sensors.
 **The Aura Config File for the Ventique can be easily built in the ''New Aura Config File'' "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
 ***Alternately, you can [[Aura/ConfigFiles#Ventique_60e_Aura_Config_Files_with_Rx_Auto_Detect| Download a Ventique .acf file]]
 *'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German''']

@@ Line 3: / Line 3: @@
 *Please review [http://www.resources.flexinnovations.com/files/9712370-_Ventique_Addendum.pdf '''Ventique Addendum'''] with Building tips.
-*There have been a couple of reports of the '''set screws coming loose''' in the Potenza 60 470kv Motor. During the build, please remove the shaft set screws one at a time from the bell housing (flange) and the shaft retaining collar, apply 242 loctite, and tighten them securely. Motor instructions can be [http://www.resources.flexinnovations.com/files/Potenza_60_Instructions_ENG.pdf '''seen here''']
+*There have been a couple of reports of the '''set screws coming loose''' in the Potenza 60 470kv Motor. During the build, please remove the shaft set screws one at a time from the bell housing (flange) and the shaft retaining collar, apply 242 loctite, and tighten them securely. Motor instructions with images can be [http://www.resources.flexinnovations.com/files/Potenza_60_Instructions_ENG.pdf '''seen here''']
 *Ventique '''Aura Installation Instructions'''[[File:Ventique Aura 600h.png|thumb|upright=0.5|right|Reinforce the Tray]]