Difference between revisions of "QQExtra300/BuildTips"

Revision as of 16:44, 5 January 2016

When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' model memory, then apply the few settings per the manual page 8. Do NOT put the Aura Settings (Reference) into the Transmitter.

General Addendum for Auto-Detect and flight Preparation.
See the Extra Manual Addendum

For Aircraft delivered before February, 2016, some aircraft had wing fit issues.
See the Wing Install Addendum

A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a Mandatory update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware can be checked with the Aura Config Tool
- Firmware 1.2 offers these updates for Extra Users
  - Improved booting. Fixes a rare issue where the Aura could hang during power-up
  - Added 'Quick' features; Quick Trim, and Quick Check.

For Aircraft delivered before February, 2016, some aircraft had wing fit issues.
See the Wing Install Addendum

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:QQ Extra 300 Build Tips}}
+* When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' model memory, then apply the few settings per the manual page 8. Do NOT put the Aura Settings (Reference) into the Transmitter.
 *General Addendum for Auto-Detect and flight Preparation.<br/>See the [http://store.flexinnovations.com/s/QQ_Extra_300_Addendum_V2.pdf Extra Manual Addendum]