Difference between revisions of "QQExtra300/BuildTips"
From Flex Innovations Wiki
m |
m |
||
| Line 1: | Line 1: | ||
{{DISPLAYTITLE:QQ Extra 300 Build Tips}} | {{DISPLAYTITLE:QQ Extra 300 Build Tips}} | ||
| − | *When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' model memory, then apply the few settings per the manual page 8. Do NOT put the Aura Configuration Reference settings into the Transmitter. | + | *When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per the manual page 8. Do NOT put the Aura Configuration Reference settings into the Transmitter. |
*[http://store.flexinnovations.com/s/QQ_Extra_300_Addendum_V2.pdf Addendum] for Auto-Detect and flight Preparation. | *[http://store.flexinnovations.com/s/QQ_Extra_300_Addendum_V2.pdf Addendum] for Auto-Detect and flight Preparation. | ||
Revision as of 16:56, 5 January 2016
- When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per the manual page 8. Do NOT put the Aura Configuration Reference settings into the Transmitter.
- Addendum for Auto-Detect and flight Preparation.
- For Aircraft delivered before February, 2016, some aircraft had wing fit issues.
See the Wing Install Addendum
- A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a Mandatory update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware can be checked with the Aura Config Tool
- Firmware 1.2 offers these updates for Extra Users
- Improved booting. Fixes a rare issue where the Aura could hang during power-up
- Added 'Quick' features; Quick Trim, and Quick Check.
- Firmware 1.2 offers these updates for Extra Users
