View source for Aura/AuraConfigToolReleaseNotes

{{DISPLAYTITLE:Aura Config Tool Release Notes}}
== Aura Config Tool Release Notes ==

=== Latest Release ===

==== Aura Config Tool v1.1.13.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool in February 2020
* Supports for Aura Firmware v1.13
* Support new FT Aura 5 product
** Supports new FT Aura features such as Launch Assist, Bank Assist and Level Assist
* Differentiate between Futaba's SBUS channel order and FrSky's Default SBUS channel order
* Add Support for "Stick Relative" Stick Priority that is independent of each Flight Mode's Dual Rate/Expo Settings

=== Previous Releases ===

==== Aura Config Tool v1.1.12.1 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool in October 2019
* Supports for Aura Firmware v1.11
* Prevent Servo Port S11 or S12 being set as 'PWM Capture' which is not supported by any firmware

==== Aura Config Tool v1.1.11.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool in August 2019
* Supports for Aura Firmware v1.11
* Required for use with the Aura Professional series
** Supports new Aura Professional options such as SBUS Diversity, SBUS Output, External Sensor support, and Battery Voltage Monitoring
* Add Jeti EX-Bus Capability
* Allows conversion of Aura Config Files between various products
** For example can convert and Aura 8 QQ Extra 300 configuration to an Aura 12 Professional Open Stock configuration.
* Small Bug Fixes

==== Aura Config Tool v1.1.10.1 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on May 2019
* Small bug fix for Ventique Wizard file creation

==== Aura Config Tool v1.1.10.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on April 2019
* Supports for Aura Firmware v1.10
* Required for use with the Mamba 60E.

==== Aura Config Tool v1.1.9.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on March 2019
* Supports for Aura Firmware v1.9
* Required for use with the FlexJet TV.

==== Aura Config Tool v1.1.8.2 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2019
* Supports for Aura Firmware v1.8
* Added the CAP-232EX+ Servo Update Helper

==== Aura Config Tool v1.1.8.1 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on January 2019
* Add Support for Aura Firmware v1.8
* Required for use with the RV8.

==== Aura Config Tool v1.1.8.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on Nov 2018
* Supports for Aura Firmware v1.6
* Required for use with the QQ Extra 300 G2.

==== Aura Config Tool v1.1.5.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2018
* Supports for Aura Firmware v1.5
* Required for use with the CAP-232EX and Flex Jet

==== Aura Config Tool v1.1.4.2 ====
* Small Bug Fix Release available via 'Update Aura Config Tool' in Aura Config Tool on March 28, 2017
* Supports for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
* Small Software Changes:
** Update QQ Yak 54 35cc Receiver Type:PWM graphics and labels in New Aura Config File Wizard
** Fix to always show Primary Control Mode when viewing the Control Mode tab with Live Data on.

==== Aura Config Tool v1.1.4.1 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool on March 21, 2017
* Supports for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
* Main Software Changes:
** Add "Aircraft Template" for the new QQ Yak 54 35cc in the New Config File Wizard to easily create the tuned Config File
** Updated default save location to My Documents or the previously saved location.

==== Aura Config Tool v1.1.4.0 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool on February 22, 2017
* Support for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura in Spring 2017
* Main Software Changes:
** Add feature to turn Aura Mixes On/Off via a Transmitter 2 or 3 Position Channel Switch.
** Add feature to create a 'Gyro Kill Switch' via a Transmitter Channel from the Wizard.
** Add Generic Live Wing to 'New Config File Wizard' for Open Stock Aura.

==== Aura Config Tool v1.1.3.0 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool in late August 2016
* Support for Aura Firmware v1.3
* Required for use with the Cessna 170
* Main Software Changes:
** Add Live Save functionality for Subtrims and Output Scaling
** Improve Live Data functionality

==== Aura Config Tool v1.1.1.0 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool in mid November 2015
* Support for Aura Firmware v1.2
* Initially released for the Aura 8 Open Stock in November 2015
* Main Software Changes:
** Add support for Open Stock Aura
** Add Quick Set and Quick Trim features
** Add for Dual Control Modes per Flight Mode
** Add support for +/- Output Scales
** Add support for SubTrim in uSec steps
** Introduce Config File Version v1.1

==== Aura Config Tool v1.0.2 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool in mid August 2015
* Support for Aura Firmware v1.1
* Forced any Aura to update from Aura Firmware v1.0 to v1.1

==== Aura Config Tool v1.0.1 ====
* Initially released for the QQ Extra 300 Aura 8 in early August 2015
* Support for Aura Firmware v1.0
* No longer authorized by Flex Innovations for use.  Flex Innovations can only support v1.1+.


== How to Check the Aura Config Tool Version ==
To find the version of the Aura Config Tool, click the Help '''Menu --> Aura Config Tool Info'''.  The version shown below is not the latest available version, it is only shown as an example.
[[File:ACT CheckVersionInfo.gif|none|none|How to Check the Version Info of the Aura Config Tool]]<br>
<!-- [[File:ACT_VersionInfo.mp4|600px]] -->

<noinclude>[[Category:Aura|Aura]]</noinclude>