Cessna170/ExtremeSetup

The Flex Innovation Team's Cessna 170 Extreme Setup alters the flap behavior and adjusts other elements to allow the Cessna 170 to do maneuvers well beyond those of it's full-scale counterpart, even into the '3D' realm. The Aura 8 and its powerful capability is a key part of this capability. It allows the Flaps to be reconfigured with the flip of a switch from 'conventional flaps', to 'prop blasted' ailerons with gyro enhanced stability.

Typically, the key elements of the setup are:

• Modified flap linkage and geometry to allow the flaps to move up and down and to act as 'Ailerons', etc.
• A software change via downloaded Aura Config File (.acf) that activates the flaps as ailerons and includes gyro inputs in specific flight modes.
• Use of a 6S Battery (typically) for awesome power.

Below you will conversion instructions and more detailed descriptions of the Aura Flight Modes (FM).

Part 1: Install the new Aura Config File (Model Settings) into Aura Requires:

• Micro B USB Cable (came with plane)
• Windows PC or Tablet
• Aura Config Tool (Windows Application for Aura)'

If you do not have it already, download and install the Aura Config Tool using the instructions linked here Download the Cessna 170 Extreme Model File and save it to a known location on your windows device Launch the Aura Config Tool and Connect to Aura (more basic instructions on the use of the Aura Config Tools can be found Here and Here) If you have previously flown and trimmed your Cessna 170, we recommend Reading and Save As (to a folder on your windows device) your existing Aura settings for future use or reference.