Difference between revisions of "Cypher/Telemetry"
From Flex Innovations Wiki
(Created page with "Under Construction ===Spektrum Telemetry=== *Easy to setup *Choose a telemetry capable receiver such as the AR4649T (Preferred) or AR8010T *Bind the receiver to the transmitt...") |
|||
Line 10: | Line 10: | ||
***Make sure ''Receiver Mode'' is set to a serial based receiver. | ***Make sure ''Receiver Mode'' is set to a serial based receiver. | ||
***Make sure ''Serial Receiver Provider'' is set to SPEKTRUM2040/SRXL | ***Make sure ''Serial Receiver Provider'' is set to SPEKTRUM2040/SRXL | ||
− | ***Now in other features, '''set''' the ''TELEMETRY'' slider to ''ON''. | + | ***Now in other features, '''set''' the ''TELEMETRY'' slider to '''ON'''. |
− | ** | + | **On the '''Receiver''' page, make sure your ''Channel Map'' is set to '''TAER1234''' (SPEKTRUM) |
+ | *You should now have Telemetry, and you can use your transmitters instructions and settings to display and alarm as desired. |
Revision as of 13:05, 19 June 2019
Under Construction
Spektrum Telemetry
- Easy to setup
- Choose a telemetry capable receiver such as the AR4649T (Preferred) or AR8010T
- Bind the receiver to the transmitter
- Connect to FLEXF3 using the first 3 pins (-,+,signal). (Use 3-male to 3-mail pin cable if required for AR8010T style receivers)
- Use your configuration tool to:
- On Configuration page
- Make sure Receiver Mode is set to a serial based receiver.
- Make sure Serial Receiver Provider is set to SPEKTRUM2040/SRXL
- Now in other features, set the TELEMETRY slider to ON.
- On the Receiver page, make sure your Channel Map is set to TAER1234 (SPEKTRUM)
- On Configuration page
- You should now have Telemetry, and you can use your transmitters instructions and settings to display and alarm as desired.