Cypher/Telemetry
From Flex Innovations Wiki
Revision as of 13:03, 19 June 2019 by FlexTeam (Talk | contribs) (Created page with "Under Construction ===Spektrum Telemetry=== *Easy to setup *Choose a telemetry capable receiver such as the AR4649T (Preferred) or AR8010T *Bind the receiver to the transmitt...")
Under Construction
Spektrum Telemetry
- Easy to setup
- Choose a telemetry capable receiver such as the AR4649T (Preferred) or AR8010T
- Bind the receiver to the transmitter
- Connect to FLEXF3 using the first 3 pins (-,+,signal). (Use 3-male to 3-mail pin cable if required for AR8010T style receivers)
- Use your configuration tool to:
- On Configuration page
- Make sure Receiver Mode is set to a serial based receiver.
- Make sure Serial Receiver Provider is set to SPEKTRUM2040/SRXL
- Now in other features, set the TELEMETRY slider to ON.
- On Configuration page
