F-100D Super Sabre 90mm EDF Latest Updates, Build Tips and Addendum

From Flex Innovations Wiki
Revision as of 15:54, 30 August 2020 by FlexTeam (Talk | contribs)

Jump to: navigation, search


--Under Construction--


Pro Tips for Flap Setup

Notes

Center of Gravity

  • The CG section of the F-100D manual had some conflicting information displayed. The correct CG's are listed in the image to the right. Click for the full sized image.

JR DMSS Use

  • In addition to the JR DMSS receivers listed in the manual, the RG812BX should be a good choice as well. Avoid the BPX receivers as they will not do servo pulses and serial data at the same time.
  • We recommend updating to the very latest Aura Firmware v1.14 or higher and then set the 'new to Aura' JR XBUS MODE A serial data in the transmitter and the Aura.
  • Using MODE A, you can physically wire/connect it just like Futaba diagram in the manual (P. 7). Throttle and Gear in the Receivers ports. Xbus to Port B in Aura.

Setup

TBD