Difference between revisions of "QQExtra300/BuildTips"

Revision as of 16:57, 5 January 2016

When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per the manual page 8. Do NOT put the Aura Configuration Reference settings into the Transmitter.

For Aircraft delivered before February, 2016, some aircraft had wing fit issues.
See the Wing Install Addendum

A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a Mandatory update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware version can be checked and updated with the Aura Config Tool
- Firmware 1.2 offers these updates for Extra Users
  - Improved booting. Fixes a rare issue where the Aura could hang during power-up
  - Added 'Quick' features; Quick Trim, and Quick Check.

@@ Line 7: / Line 7: @@
 *For Aircraft delivered before February, 2016, some aircraft had wing fit issues.<br/>See the [http://store.flexinnovations.com/s/Extra_Wing_Installation_Procedure.pdf Wing Install Addendum]
-*A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a Mandatory update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware can be checked with the [http://store.flexinnovations.com/aura-config-tool/ Aura Config Tool]
+*A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a Mandatory update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware version can be checked and updated with the [http://store.flexinnovations.com/aura-config-tool/ Aura Config Tool]
 **Firmware 1.2 offers these updates for Extra Users
 ***Improved booting. Fixes a rare issue where the Aura could hang during power-up