Difference between revisions of "QQExtra300/BuildTips"

Revision as of 16:07, 6 January 2016

When programming your Transmitter per the manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per page 8 in the manual. Do NOT put the Aura Configuration Reference settings into the Transmitter.

Wing Install Addendum for Aircraft delivered before February, 2016. Some aircraft had wing installation issues.
Auto-Detect Addendum for first flight Preparation. Please Review.
A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a Mandatory update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware version can be checked and updated with the Aura Config Tool and Firmware Update Instructions are here.
- Firmware v1.2 offers these enhancements for Extra Users over v1.1
  - Improved booting. Fixes a rare issue where the Aura could hang during power-up.
  - Added 'Quick' features; Quick Trim, and Quick Check.

@@ Line 4: / Line 4: @@
 *[http://store.flexinnovations.com/s/Extra_Wing_Installation_Procedure.pdf Wing Install Addendum] for Aircraft delivered before February, 2016. Some aircraft had wing installation issues.
-*[http://store.flexinnovations.com/s/QQ_Extra_300_Addendum_V2.pdf Auto-Detect Addendum] for first flight Preparation.
+*[http://store.flexinnovations.com/s/QQ_Extra_300_Addendum_V2.pdf Auto-Detect Addendum] for first flight Preparation. Please Review.
 *A small number of aircraft delivered during August of 2015 had Firmware Version 1.0. These aircraft are subject to a ''Mandatory'' update to V1.1 or higher. Version 1.1 and 1.2 are both supported for use. Firmware version can be checked and updated with the [http://store.flexinnovations.com/aura-config-tool/ Aura Config Tool] and [[Aura/FWUpdate|Firmware Update Instructions are here]].
 **Firmware v1.2 offers these enhancements for Extra Users over v1.1