Difference between revisions of "QQYak54 35cc/CompletionItems"

From Flex Innovations Wiki
Jump to: navigation, search
m
m
 
Line 88: Line 88:
  
 
== Optional Items ==
 
== Optional Items ==
 +
 +
<noinclude>
 +
[[Category:ARF+ARFSV|ARF + ARFSV]]
 +
[[Category:QQYak54_35cc|QQ Yak 54 35cc]]
 +
</noinclude>

Latest revision as of 02:09, 29 March 2017

Completion Items

Electric Specific Items


Motor

  • (1) 200-size Brushless, for 12S Li-Po Batteries
    • We recommend the Potenza 200 175kv Motor (FPZM200A)

Speed Controller (ESC)

  • (1) 80A HV (12S Li-Po Compatible) ESC with no BEC
    • We recommend the Castle Creations Phoenix Edge HV 80 (FPZPHXEDGE80HV)

Motor Batteries

  • (2) 6S (22.2V) 3500-4200mAh 40C+ Lithium Polymer Batteries wired in series (for 12S, 44.4V)
    • We recommend (2) Potenza 6S 4200mAh 40C Li-Po Batteries wired in series (FPZB42006S40)

Propeller

  • Consult your motor/ESC manual for recommendations. Verifying proper current draw may be required.
    • We recommend the Falcon 21x10E (FPMPFC2110E) or APC 20x11 for use with the Potenza 200.

Other Miscellaneous Items

  • (1) 12-inch (305mm) Heavy Duty Servo Extension (Throttle/ESC)

Gas Specific Items


Engine

  • (1) 30-40cc Gasoline Internal Combustion Engine
    • We recommend the Desert Aircraft DA-35 (FPMDA35)
  • (1) Exhaust System that works in conjunction with your engine
    • We recommend the Desert Aircraft Pitts-style muffler for the DA-35 (FPMDA35MUFLR).
    • If you wish to use a tuned pipe or canister, the Yak will accept this exhaust quite easily.
      • For the DA-35, we recommend a header drop of 0mm

Ignition Battery

  • (1) 2S (7.4V) 1000-2000mAh Lithium Polymer Battery. Verify proper voltages for your particular ignition system!
    • We recommend (1) Potenza 2S 1300mAh 25C Li-Po Battery (FPZBR13002S25)

Propeller

  • Consult your engine manual for recommendations.
    • We recommend the Falcon 20x8 (FPMPFC2008) for use with the DA-35 on a standard Pitts muffler.

Servos

  • (1) Standard-size servo (Throttle)
    • We recommend (1) DS-222 HV Servo (FPZDS22209HV) for throttle purposes.
  • (1) Standard-size servo (Choke)
    • We recommend (1) DS-222 HV Servo (FPZDS22209HV)
    • This is optional. A mechanical choke linkage is also an option, and the preferred method of actuating the choke

Other Miscellaneous Items

  • (1) 6-inch (150mm) Heavy Duty Servo Extension (Choke, Optional)
  • (1) 3-inch (76mm) Heavy Duty Servo Extension (Throttle)
  • 3-Feet (1 meter) Tygon Gas Fuel Tubing (large diameter)

Both Electric and Gas Setups


Receiver

  • Without Aura 8 AFCS
    • Any 6+ Channel Receiver compatible with your transmitter.

Receiver Batteries

  • (2) 2S (7.4V) 1300-2500mAh 20C Li-Po Batteries
    • We recommend (2) Potenza 2S (7.4V) 1300mAh 25C Batteries (FPZBR13002S25)

Servos

  • (5) Hi-Torque, High-Voltage, Digital Servos, capable of 190 oz-in. of Torque and 0.12 sec/60º.

Other Miscellaneous Items

  • Spinner
    • 3-3/4-inch (95mm) P-51 Style 2-Blade Spinner
      • We recommend the Tru-Turn 3-3/4-inch (95mm) P-51 Style 2-Blade Aluminum Spinner. Make sure you get the proper style for Electric or Gas (FPMTT375 for Gas, and FPMTT375E for electric).
  • Servo Extensions
    • (2) 24-inch (610mm) Heavy Duty Servo Extensions (Elevator)
    • (2) 6-inch (150mm) Heavy Duty Servo Extensions (Ailerons, Inside Wings)
    • (2) 3-inch (75mm) Heavy Duty Servo Extensions (Receiver to Ailerons)
  • Servo Arms
    • (2) 1-1/2-inch Radius Single Aluminum Servo Arms, with the hole tapped for 3mm (Ailerons)
      • We recommend (2) Potenza 1-3/4-inch Radius Single Aluminum Servo Arms (FPZA0003)
    • (2) 1-1/4-inch Radius Single Aluminum Servo Arms, with the hole tapped for 3mm (Elevators)
      • We recommend (2) Potenza 1-1/4-inch Radius Single Aluminum Servo Arms (FPZA0007)
    • (1) 1-1/2-inch Radius Double Aluminum Servo Arm, with the holes tapped for 3mm (Rudder)
      • We recommend (1) Potenza 1-1/2-inch Radius Double Aluminum Servo Aarm (FPZA0004)

Optional Items