Flex Innovations Wiki - User contributions [en]

QQExtra300

2025-10-17T14:47:15Z

WikiSys:

{{DISPLAYTITLE:QQ Extra 300 Wiki}}

Welcome to the Flex Innovations - QQ Extra 300 Wiki
== QQ Extra 300 ==

=== Aircraft Info ===
* [[QQExtra300/Overview|What is the QQ Extra 300?]]
* [[QQExtra300/BuildTips|Build Tips and New User Info]]
* [[QQExtra300/4S_Motors|4S Motor Information]]

=== Documents and Manuals ===
* [http://resources.flexinnovations.com/files/QQExtra300G2_EN_WebOnly.pdf Instruction Manual]
* [[QQExtra300/G2ServoAddendum|DS15 Servo Addendum for G2 Extra and Replacement DS15 Servos]]
* [http://resources.flexinnovations.com/files/ZTW_Addendum_final.pdf ZTW ESC Addendum]
* [http://resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/qq-extra/ Product Page]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:QQExtra300|QQ Extra 300]]
</noinclude>

Aura/AuraConfigToolReleaseNotes

2025-10-02T18:45:42Z

WikiSys:

{{DISPLAYTITLE:Aura Config Tool Release Notes}}
= Aura Config Tool Release Notes =

== Latest Release ==

=== Aura Config Tool v1.1.25.1 ===
* Minor update on available on October 2, 2025
* Added Aviator 40E configuration to the Aura Config Tool Wizard

== Previous Releases ==

=== Aura Config Tool v1.1.25.0 ===
* Update on available on July 27, 2025
* Add support for the RV-8 10E G2 that ships with Firmware v1.25
* Support new features of Firmware v1.25 for Aura 8 and Aura Pro 6Axis:
** Level Assist Control Mode now available
** Launch/Takeoff Assist preprogrammed capability
* Add new '6Axis Calculations Enabled' flag to Setup Tab that appears after updating to Firmware v1.25.
** Must enable this Flag to setup a Level Assist Control Mode or activate Launch/Takeoff Assist with the transmitter
** If a Flight Mode is assigned a Level Assist Control Mode, the Max Angle Cmds are shown on the Flight Modes Tab instead of the Dual Rates
* Update the old Super PNP Wizards so they can use 6Axis Features
* Update the new Extra 300 60E Config Profile from 'Extra 300 60' to 'Extra 300 60E+' for clarity
* Changing the Flap System between traditional Transmitter Flaps to the Aura Flaps system will offer to automatically update your Servo Ports for the user.
* Set the Default FrSky/Radiomaster SBUS channel order to AETR instead of TAER in the Wizard

=== Aura Config Tool v1.1.23.2 ===
* Minor update on available on March 11, 2025
* Added Extra 300 60E configuration to the Aura Config Tool Wizard

=== Aura Config Tool v1.1.23.1 ===
* Update on available on December 30, 2024
* Add '''Generic Jet Wizard''' to Open Stock Aura Wizard - Airframe Type option
** Easily create an Aura Config File for any Jet configuration
** Includes 3 types of Gain/Rates/Expo Setups: Traditional Rates, Rosier Style, or QQ F-16 Style
** Easily add common Jet options like Nose Wheel Steering, Thrust Vector Control, Live Wing Flaps, Crow, and a Gyro Gain Kill Switch
** Detailed information on the Wizard options available on the [[GenericJet/AuraWizard|Generic Jet Wiki Page]]
* Add '''Generic STOL Live Wing Wizard''' to Open Stock Aura Wizard - Airframe Type option
** Easily create an Aura Config File for any STOL Live Wing setup
** This replaces the outdated ''Generic Live Wing'' option with the latest options and easier setup
** Can select any generic Wing Type or Tail Type
** Easily add common STOL options like Live Wing Flaps, Flap Gain, Crow, and a Gyro Gain Kill Switch
** Detailed information on the Wizard options available on the [[GenericSTOL/AuraWizard|Generic STOL Live Wing Wiki Page]]


=== Aura Config Tool v1.1.23.0 ===
* Update on available on October 11, 2024
* Add 'Pop-Out Mode' message box View Option for easier use on a tablet or touchscreen
** After turning on, most options will pop-out to a separate window with easier controls for tablets or touchscreens
* Added Laser 200 60E configuration to the Aura Config Tool Wizard
* Add ability to change the External Sensor Orientation
* Add Channel Cut Setup box to Safety Tab
** Allows to setup Throttle Cut or alternate custom Cut Logic for channels directly in Aura
** Useful for Nose Wheel Steering and Thrust Vector systems

==== Aura Config Tool v1.1.22.1 ===
* Update on available on August 16, 2024
* Added CAP-232EX 70cc Airframe Type for Open Stock Auras in the Aura Config Tool Wizard

=== Aura Config Tool v1.1.22.0 ===
* Update on available on April 8, 2024
* Support for Aura Firmware v1.22
* Added Ventique 60E G2 Pro configuration to the Aura Config Tool Wizard
* Added Aura 5 Flex FP Aura and FP Edge 540 and FP Ultimate configurations to the Aura Config Tool Wizard
* Add Differential Thrust Gain option to FT Aura Wizard
* Fix TX Config bug in some Wizard file creations

=== Aura Config Tool v1.1.21.0 ===
* Update on available on August 4, 2023
* Support for Aura Firmware v1.21
* Added Twin Otter 80E configuration to the Aura Config Tool Wizard
* Improved setup for FrSky and Futaba in Wizard and Setup Tab
** Improved SBUS Ch Order options for FrSky and Futaba
** Improved center offset for digital FrSky SBUS setups

=== Aura Config Tool v1.1.20.0 ===
* Beta tested in July 2023 but unreleased due to product timing
* Support for Aura Firmware v1.20
* Added RV-8 60E G2 configuration to the Aura Config Tool Wizard
* Updated Learn Transmitter functionality
** Added Manual Transmitter Setup that can be configured without needing the Transmitter/Receiver active.
* Improve Arm/Disarm logic when modifying Transmitter
** Moved 'Re-Arm' throttle button to top right corner if Aura disarms the throttle for safety during configuration.
* Add "Wing and Tail Type Wizard" button on Setup tab
** Can now view and modify the Servo Port configuration on a single view.
* Added Aileron Differential feature for Aura Firmware v1.20+.
** Must slide "Aileron Differential Enabled" to ON on the Setup tab
** Aileron Differential can be configured individually for Left and Right stick movements
** Differential can scaled proportionally during flight to tune in real time if desired
* Add "Third Control Mode" option for Aura Firmware v1.20+.

=== Aura Config Tool v1.1.19.2 ===
* Update on available on Feb 20, 2023
* Added Edge 540 120cc configuration to Aura Config Tool Wizard for Open Stock Auras

=== Aura Config Tool v1.1.19.1 ===
* Update on available on Dec 8, 2022
* Added Ultimate 70cc configuration to Aura Config Tool Wizard for Open Stock Auras

=== Aura Config Tool v1.1.19.0 ===
* Update on available on June 7, 2022
* Supports for Aura Firmware v1.19
* Added QQ Yak55 10e configuration to Aura Config Tool Wizard
* Added CAP 232EX+ 2022 updated configurations to Aura Config Tool Wizard
* Added Throttle Input Direction slide switch on Setup tab

=== Aura Config Tool v1.1.17.3 ===
* Update on available on Feb 18, 2022
* FIX: Corrected RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard
** Corrected Ailerons and Flap Servo Direction values
* Added Cessna 170 G2 configuration to Aura Config Tool Wizard
* Added option to enable the Aura Flap system in the Aura Config Tool Wizard
** Available for Aura Open Stock 'Custom' Airframe types with Flap Wing Types

=== Aura Config Tool v1.1.17.2 ===
* Minor Change available on Jan 19, 2022
* Added RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard

=== Aura Config Tool v1.1.17.1 ===
* Minor Change available on Dec 23, 2021
* Enable Aura Flap System for RV8-10 and Open Stock when using latest firmware v1.17

=== Aura Config Tool v1.1.17.0 ===
* Minor Change available on October 5, 2021
* Supports for Aura Firmware v1.17
* New Config File Wizard updated to support RV8-10

=== Aura Config Tool v1.1.16.0 ===
* Minor Change available on May 20, 2021
* Supports for Aura Firmware v1.16
* New Config File Wizard updated to support FlexJet G2

=== Aura Config Tool v1.1.15.0 ===
* Minor Change available on January 2, 2021
* Supports for Aura Firmware v1.15
* New Config File Wizard updated to support Pirana and Mamba 10 G2 6S

=== Aura Config Tool v1.1.14.2 ===
* Minor Change available on September 10, 2020 for Mamba 120cc
* New Config File Wizard updated to include "Mamba 120cc"
** Select "Mamba 120cc" for the "Airframe Type" of an Open Stock Aura to create the Aura Config File for the Mamba 120cc

=== Aura Config Tool v1.1.14.1 ===
* Minor Bug Fix Added on August 17, 2020:
** Only Allow the Aura Config Tool to set the Receiver to SRXL2 or JR Mode A for firmware v1.14+

=== Aura Config Tool v1.1.14.0 ===
* Release available soon via 'Update Aura Config Tool' in Aura Config Tool in August 11, 2020
* Supports for Aura Firmware v1.14
* Add SRXL2 Capability for Spektrum SPM4650 and SPM4651T SRXL2 receivers
* Add JR Mode A Capability
* Required for use with F-100D Super PNP

=== Aura Config Tool v1.1.13.0 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool in February 2020
* Supports for Aura Firmware v1.13
* Support new FT Aura 5 product
** Supports new FT Aura features such as Launch Assist, Bank Assist and Level Assist
* Differentiate between Futaba's SBUS channel order and FrSky's Default SBUS channel order
* Add Support for "Stick Relative" Stick Priority that is independent of each Flight Mode's Dual Rate/Expo Settings

=== Aura Config Tool v1.1.12.1 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool in October 2019
* Supports for Aura Firmware v1.11
* Prevent Servo Port S11 or S12 being set as 'PWM Capture' which is not supported by any firmware

=== Aura Config Tool v1.1.11.0 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool in August 2019
* Supports for Aura Firmware v1.11
* Required for use with the Aura Professional series
** Supports new Aura Professional options such as SBUS Diversity, SBUS Output, External Sensor support, and Battery Voltage Monitoring
* Add Jeti EX-Bus Capability
* Allows conversion of Aura Config Files between various products
** For example can convert and Aura 8 QQ Extra 300 configuration to an Aura 12 Professional Open Stock configuration.
* Small Bug Fixes

=== Aura Config Tool v1.1.10.1 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on May 2019
* Small bug fix for Ventique Wizard file creation

=== Aura Config Tool v1.1.10.0 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on April 2019
* Supports for Aura Firmware v1.10
* Required for use with the Mamba 60E.

=== Aura Config Tool v1.1.9.0 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on March 2019
* Supports for Aura Firmware v1.9
* Required for use with the FlexJet TV.

=== Aura Config Tool v1.1.8.2 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2019
* Supports for Aura Firmware v1.8
* Added the CAP-232EX+ Servo Update Helper

=== Aura Config Tool v1.1.8.1 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on January 2019
* Add Support for Aura Firmware v1.8
* Required for use with the RV8.

=== Aura Config Tool v1.1.8.0 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on Nov 2018
* Supports for Aura Firmware v1.6
* Required for use with the QQ Extra 300 G2.

=== Aura Config Tool v1.1.5.0 ===
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2018
* Supports for Aura Firmware v1.5
* Required for use with the CAP-232EX and Flex Jet

=== Aura Config Tool v1.1.4.2 ===
* Small Bug Fix Release available via 'Update Aura Config Tool' in Aura Config Tool on March 28, 2017
* Supports for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
* Small Software Changes:
** Update QQ Yak 54 35cc Receiver Type:PWM graphics and labels in New Aura Config File Wizard
** Fix to always show Primary Control Mode when viewing the Control Mode tab with Live Data on.

=== Aura Config Tool v1.1.4.1 ===
* Available via 'Update Aura Config Tool' in Aura Config Tool on March 21, 2017
* Supports for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
* Main Software Changes:
** Add "Aircraft Template" for the new QQ Yak 54 35cc in the New Config File Wizard to easily create the tuned Config File
** Updated default save location to My Documents or the previously saved location.

=== Aura Config Tool v1.1.4.0 ===
* Available via 'Update Aura Config Tool' in Aura Config Tool on February 22, 2017
* Support for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura in Spring 2017
* Main Software Changes:
** Add feature to turn Aura Mixes On/Off via a Transmitter 2 or 3 Position Channel Switch.
** Add feature to create a 'Gyro Kill Switch' via a Transmitter Channel from the Wizard.
** Add Generic Live Wing to 'New Config File Wizard' for Open Stock Aura.

=== Aura Config Tool v1.1.3.0 ===
* Available via 'Update Aura Config Tool' in Aura Config Tool in late August 2016
* Support for Aura Firmware v1.3
* Required for use with the Cessna 170
* Main Software Changes:
** Add Live Save functionality for Subtrims and Output Scaling
** Improve Live Data functionality

=== Aura Config Tool v1.1.1.0 ===
* Available via 'Update Aura Config Tool' in Aura Config Tool in mid November 2015
* Support for Aura Firmware v1.2
* Initially released for the Aura 8 Open Stock in November 2015
* Main Software Changes:
** Add support for Open Stock Aura
** Add Quick Set and Quick Trim features
** Add for Dual Control Modes per Flight Mode
** Add support for +/- Output Scales
** Add support for SubTrim in uSec steps
** Introduce Config File Version v1.1

=== Aura Config Tool v1.0.2 ===
* Available via 'Update Aura Config Tool' in Aura Config Tool in mid August 2015
* Support for Aura Firmware v1.1
* Forced any Aura to update from Aura Firmware v1.0 to v1.1

=== Aura Config Tool v1.0.1 ===
* Initially released for the QQ Extra 300 Aura 8 in early August 2015
* Support for Aura Firmware v1.0
* No longer authorized by Flex Innovations for use. Flex Innovations can only support v1.1+.

= How to Check the Aura Config Tool Version =
To find the version of the Aura Config Tool, click the Help '''Menu --> Aura Config Tool Info'''. The version shown below is not the latest available version, it is only shown as an example.
[[File:ACT CheckVersionInfo.gif|none|none|How to Check the Version Info of the Aura Config Tool]] 


<noinclude>[[Category:Aura|Aura]]</noinclude>

FlexJetPro90/AuraFiles

2025-10-02T15:20:39Z

WikiSys:

= Aura Files and Setup Notes =

==Click a link below to Download the Aura Config file==
*[http://resources.flexinnovations.com/aura/auraConfigFiles/FlexJetPro_Aura_8S_Generic_V2.acf '''FlexJet Pro File for Standard Aura 8 (V2)'''] for Electric FlexJet Pro's
*[http://resources.flexinnovations.com/aura/auraConfigFiles/FlexJetPro_Aura_Pro_Generic.acf '''FlexJet Pro File for Aura Professionals'''] for Electric or Turbine FlexJet Pro's
*[[FlexJetPro90/AuraFiles/AdvancedAura|'''Click here to go to a page with additional Files and Notes for ADVANCED AURA Users!''']]

'''NOTE:''' The '''Aura PRO file''' is set to use a '''Remote Sensor'''. In the case you are not using a '''Remote Sensor''', disable it in the config tool. 

'''NOTE:''' Please update Aura to '''Firmware 1.14''' or Newer (latest is best) to utilize these files!

==Transmitter Setting Tips when using Aura==
*Use Standard Aura Transmitter settings adjusting per the following
*As always with Aura... Wing and Tail Type is Normal. 1 Aileron, 1 Elevator, 1 Rudder, and '''''1 (normal/simple) Flap'''''
**Flaperon mixing will be done by Aura using the ''Flap Data'' ('''DO NOT set Flaperon in Transmitter when using AURA''')
*Use a Receiver with a working '''Throttle''' Port. Throttle (ESC or ECU) is plugged into the '''Receiver'''.
*CH5 is reserved for ''Retract Sequencer'' Use via '''Receiver's CH5/Gear Port''' (set 2-position switch)
*CH6 is the simple/single ''Flap'' 'data' that '''Aura will''' Mix into ''Flaperons''. Use transmitter Land or Flap System if available. (set 3 (or 2) position switch)
*CH7 is reserved for ''Wheel Brakes'', Use via '''Receiver's CH7/Aux2 Port'''. We use a SLIDER or other proportional input for Brakes. You could move it to a different available channel as needed.
*CH8 is reserved for Aura ''Master Gain'' (but is NOT enabled in ''Control Modes'' (set proportional knob or slider if desired, and enable in Control Modes) CH8 could be re-assigned/re-used if not used for Master Gain.
*CH9 is used for ''Flight Mode Change'' (Could be changed to CH7 for example (if not using Wheel Brakes) on the Aura ''Setup Tab'' (set 3-position switch)
*For FULL Functionality a '''9 channel or higher transmitter''' is used.
**Can be '''7 or 8 channels''' if not using Wheel Brakes and/or Master Gain. Move ''Aura Flight Mode Setup'' on the ''Aura Setup Tab'' to ''CH7'' (or ''CH8'') in these cases and use the matching Transmitter Channel with appropriate 3-position switch assigned.
*For FULL Functionality use a '''Receiver with Serial Output and at least 7 or 8 working servo ports'''
**Examples Spektrum AR8010T, Futaba R7008SB, JR RG812BX, Jeti REX 10

==General Aura Guidelines for File Use.==
*Download the appropriate file for your Aura and move it to a known directory on your PC
*Open the Aura Config Tool (update tool if update is available)
**Please make sure your Aura Firmware is v1.14 or newer
*Open the Aura Config File (.acf) from the saved location.
*On the ''Setup'' Tab, select your Radio Brand and Protocol and Connection Port.
*Verify that the ''Orientation'' of the Aura is as-set on the ''Setup Tab'', Adjust as needed.
*''Save'' your file.
*''Write all to Aura''
*Power up and adjust settings in '''''Servo Ports''''' Tab as needed (and Save and Write to Aura frequently)
**''Reversing'' may be needed depending on Servo Brand, etc.
**''Subtrim'' will likely be needed.
**You can tweak ''Output Scale'' (travel) as needed to make surfaces move symmetrically/equally
*'''Perform and pass all Control and Sensor Tests'''

==Aura Servo Port Assignments as seen in ''Servo Ports''==
*S1 Left Flaperon
*S2 Right Flaperon
*S3 Left Elevator (aka Taileron)
*S4 Right Elevator (aka Taileron)
*S5 Rudder
*S6 Nosewheel Steering
*S7 CH7 Tx Data assigned (Can be re-assigned as needed in ''Servo Port S7 -> Output Type'')
*S8 CH8 Tx Data assigned (Can be re-assigned)

==Special File Implementation Notes and Expert Tuning==
*'''Aura Flight modes''' are:
**FM1 Low Rates -- Gyro OFF
**FM2 Low Rates -- Gyro Med-Low -- with Taileron
**FM3 High Rates -- Gyro Low -- with Taileron

*The '''Nosewheel Steering''' is coupled specifically to allow it to be turned OFF when the Gear is UP
**''Rudder'' Channel Data is mixed (copied) to ''CH21'' inside Aura via ''Aura Mix 1''. CH21 will be used to drive the steering Servo.
***This Aura mix is turned ON and OFF via the CH5/Gear switch
***If Reversing the Gear switching action is necessary (Steering is working when UP instead of DOWN), you may need to change the Switch Position where the Mix is ACTIVE vs. INACTIVE inside Aura Mix 1!
**''CH21 Steering Data'' is then output on ''Servo Port'' '''''S6''''' for Steering Servo

*'''Aileron''' transmitter roll input is put into the '''Horizontal Stabs''' (elevators) in ''Flight Modes'' 2 and 3 to make them '''Tailerons'''
**''Aileron'' Data is copied to ''CH22'' using ''Aura Mix 3'' in Flight Modes 2 and 3 as Checked
**''CH22'' Is added to the Stabs as 'Sources' in Servo Ports '''''S3''''' and '''''S4'''''.
**Roll '''Gyro''' inputs are NOT made to the Stabs, only Pitch Gyro inputs are put into the Stabs.
**'''Tailerons''' free up the model to allow faster roll rates and a crisper response and improve roll response when Flaperons are used, but are not required. You could choose to disable them and increase the Aileron Travel a bit.
*You can easily adjust your Flaperons' '''Flap''' travel and even flap transit speed using your '''Transmitter's''' features on ''CH6''
**Right and Left Flaps travel can be easily adjusted (independent of Aileron ''Output Scale/Travel'' with the Source2/CH6 ''Mix Scale'' values in Servo Ports '''''S1''''' and '''''S2'''''.

[[FlexJetPro90| FlexJet Pro Main Wiki Page]] 
[https://www.flexinnovations.com/product/flexjet-pro-arf/ FlexJet Pro 90mm EDF Product Page] 
[http://wiki.flexinnovations.com/wiki/Aura General Aura Information] 

<noinclude>
[[Category:ARF+ARFSV|ARF + ARFSV]]
[[Category:FlexJetPro90|FlexJetPro90]]
</noinclude>

Aura

2025-08-08T17:24:08Z

WikiSys: /* Aura Config Tool and Aura Firmware */

{{DISPLAYTITLE:Aura AFCS Wiki}}
Welcome to the Flex Innovations - Aura AFCS Wiki

== Aura Wiki Update In Progress! ==
We are in the process of updating our Aura Wiki/Documentation to reflect our latest firmware v1.25+ (July 2025).

The original Wiki has been been archived and is accessible at: [[Old/Aura|Archived: Aura Wiki]]

Please use the links below for the latest/best Aura Information!

== Aura Config Tool and Aura Firmware ==
* [[Aura/AuraConfigToolInstall|How to: Install the Aura Config Tool on Windows]]
* [[Aura/FirmwareUpdate|How to: Update Aura Firmware with the Aura Config Tool]]
* [[Aura/ConvertAura|How to: Convert the Aura with the Aura Config Tool]] 
* [[Aura/AuraConfigToolReleaseNotes|Aura Config Tool Release Notes]]
* [[Aura/ReleaseNotes|Aura Firmware Release Notes]]
* [[Aura/BootloaderReleaseNotes|Aura Bootloader Release Notes]]

== Aura Video Playlists ==
* [[Aura/AuraVideos|Aura Videos]]

== Aura Product Specific Info==
* [[Aura/FTAura5|FT Aura 5 Wiki Page]]
** FT Aura 5 Quick Start Overview [http://resources.flexinnovations.com/files/FTAura5_QuickStartOverview_v1p25.pdf (PDF) - English - Updated for Firmware v1.25+]
 
* [[Aura/Aura8|Aura 8 Wiki Page]]
** Aura 8 Quick Start Overview [http://resources.flexinnovations.com/files/Aura8_QuickStartOverview_v1p25.pdf (PDF) - English - Updated for Firmware v1.25+]
 
* [[Aura/Professional|Aura 8 Pro & Aura 12 Pro Wiki Page]]
** Aura Professional Quick Start Overview [http://resources.flexinnovations.com/files/AuraPro_QuickStartOverview_v1p25.pdf (PDF) - English - Updated for Firmware v1.25+]

== General Aura Info ==
* [http://resources.flexinnovations.com/files/Aura8_AuraPro_6Axis_Update_and_QuickFlip_Guide.pdf Aura 8 and Aura Pro - 6Axis Update and Quick Flip Guide (PDF) - English] - For Firmware v1.25+
* [[Aura/Overview|Aura Overview, FAQ, Glossary, Troubleshooting Guide and Support]]
* [[Aura/UserGuide|Expanded Aura User Guide]]
* [[Aura/TransmitterReceiverGuide|Transmitter and Receiver Brand Guides]]
* [[Aura/LargeAircraftInstall|Large Aircraft Install Tips]]
* [[Aura/General_Connections_and_Power|Aura Connections Info]]
* [[Aura/ConfigFiles|Aura Config File Example Model Library]]

<noinclude>[[Category:Aura|Aura]]</noinclude>

Aura/FTAura5

2025-08-07T19:57:07Z

WikiSys:

{{DISPLAYTITLE:Aura 5 Wiki}}
== Aura 5 Overview ==
* Designed for most fixed wing models with up to 5 customizable Servo Port Outputs!
* Available as an ''FT Aura 5'' for complete customization, or shipped pre-programmed/installed in our smaller Super PNP airplanes such as the Piranha.
* Single Mini DSMX Satellite Receiver Input
* Single Receiver Input for all Digital Receiver Formats (SRXL2, SRXL, SBUS, SUMD, JR Mode A/B, Jeti EX-BUS)
* Up to 5 customizable Gyro-capable Servo Outputs
* Free Firmware Updates via USB
* Traditionally ships as with 3 Flight Modes (Gyro Off, Low Gain, High Gain)
* Quick Trim Button for Easy Quick Trim
* Bind Button to easily start the Bind Process on a DSMX Satellite
* Quick Change Mode to Change Gyro Correction directions, Flight Mode 2 between 3Axis/6Axis, Aileron/Elevon wing types, and Gyro Gain Scaling without a PC
* [https://www.flexinnovations.com/product/aura-5-afcs/ Aura 5 Product Page]

== Current Manuals ==
* [http://resources.flexinnovations.com/files/FTAura5_QuickStartOverview_v1p25.pdf FT Aura 5 Quick Start Overview - English - Updated for Firmware v1.25+]
** New for July 2025 to document firmware v1.25+ features
* [http://resources.flexinnovations.com/files/FTAura5_QuickStartGuide.pdf FT Aura 5 Quick Start Overview - English]
** Original firmware v1.12 - v1.23

== Archived Manuals ==
* [http://resources.flexinnovations.com/files/FTAura5LT_ManualAddendum_Single.pdf FT Aura 5 Quick Start Guide Addendum - English]
** Early FT Aura 5 Lites may have shipped without information on activating Launch Assist. This addendum provides this missing information.

== Aura Video Playlists ==
* [[Aura/AuraVideos|Aura Videos]]

== Aura 5 Specific Resources and Tips==

=== FT Aura 5 3D Printed Mount ===
* [[Aura/FTAura5/3DPrintedMount|FT Aura 5 3D Printed Mount]]

== General Aura Info ==
* [[Aura|Aura Overview]]

RV-8 70cc

2025-08-07T19:51:25Z

WikiSys:

{{DISPLAYTITLE:RV-8 70cc G1/G2 FLS Wiki}}
Welcome to the Flex Innovations - RV-8 70cc G1/G2 FLS Wiki
== RV-8 70cc G1/G2 FLS ==

=== Aura Help ===
* [[RV-8_70cc/FlightModes|RV-8 70cc Aura Flight Modes]]
* [[RV-8_70cc/TransmitterSetup|How to Setup your Transmitter for the RV-8 70cc with Aura]]



=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/RV-8%2070cc%20Manual%20Final.pdf RV-8 70cc Manual]
* [https://resources.flexinnovations.com/files/RV-8%2070cc%20G2_Manual%20Addendum.pdf RV-8 70cc G2 Manual Addendum - Required for G2 Builds]
* [https://resources.flexinnovations.com/files/RV-8_70cc_FloatSet_Manual.pdf Float Set Instruction Manual]
* [http://resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Addendums ===
* [http://resources.flexinnovations.com/files/RV70%20Rudder%20Control%20Horns%20Addendum.pdf RV-8 70cc Control Horn Addendum]

=== Product Information ===
* [https://flexinnovations.com/product/rv8-70cc/ Product Page]

=== Related YouTube Videos ===

{|
! RV-8 70cc G2 FLS - Feature Overview
|-
| {{#ev:youtube|https://youtu.be/FM6VaIfMUnM?si=NrLrJ51FnnmLHXOl||left||}}
|}

 
{|
! RV-8 70cc G2 FLS - Field Assembly
|-
| {{#ev:youtube|https://youtu.be/YAjm6Untg3M?si=x5IpmtID9x1n6qgS||left||}}
|}

 
{|
! RV-8 70cc FLS - Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/OWRrvH1N8fc?si=H42IL3G9QOabrJnj||left||}}
|}

 
{|
! RV-8 70cc FLS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/5C02ZmG9DzI?si=1FsX9_nbh8rwdWt3||left||}}
|}

 
{|
! RV-8 70cc FLS - Model AV8R - Episode 35
|-
| {{#ev:youtube|https://youtu.be/6RapNW7vCx4?si=y-fFaLu95PDO-bs_||left||}}
|}

 
{|
! WILL IT FIT? RV-8 70cc FLS in a Prius!
|-
| {{#ev:youtube|https://youtu.be/pIQ7sOZze5I?si=YpBhP5jJ6q_SX6o-||left||}}
|}

 
{|
! RV-8 70cc FLS - Seth Arnold at Nall In The Fall, 2021
|-
| {{#ev:youtube|https://youtu.be/B42zrqBN5U8?si=M0pZr0zvwnsVUR7e||left||}}
|}

 
{|
! RV-8 70cc FLS Overview with Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/9paTIADf8N0?si=DXAuI3piQL7n1o5Q||left||}}
|}

 
{|
! RV-8 70cc FLS Unboxing with Gonzo Hobbies
|-
| {{#ev:youtube|https://youtu.be/ObxBX-HZGFI?si=yAnDLjFTZ4VqaPzo||left||}}
|}

RV-8 70cc

2025-08-07T19:43:22Z

WikiSys:

{{DISPLAYTITLE:RV-8 70cc FLS Wiki}}
Welcome to the Flex Innovations - RV-8 70cc G1/G2 FLS Wiki
== RV-8 70cc G1/G2 FLS ==

=== Aura Help ===
* [[RV-8_70cc/FlightModes|RV-8 70cc Aura Flight Modes]]
* [[RV-8_70cc/TransmitterSetup|How to Setup your Transmitter for the RV-8 70cc with Aura]]



=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/RV-8%2070cc%20Manual%20Final.pdf RV-8 70cc Manual]
* [https://resources.flexinnovations.com/files/RV-8%2070cc%20G2_Manual%20Addendum.pdf RV-8 70cc G2 Manual Addendum - Required for G2 Builds]
* [https://resources.flexinnovations.com/files/RV-8_70cc_FloatSet_Manual.pdf Float Set Instruction Manual]
* [http://resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Addendums ===
* [http://resources.flexinnovations.com/files/RV70%20Rudder%20Control%20Horns%20Addendum.pdf RV-8 70cc Control Horn Addendum]

=== Product Information ===
* [https://flexinnovations.com/product/rv8-70cc/ Product Page]

=== Related YouTube Videos ===

{|
! RV-8 70cc G2 FLS - Feature Overview
|-
| {{#ev:youtube|https://youtu.be/FM6VaIfMUnM?si=NrLrJ51FnnmLHXOl||left||}}
|}

 
{|
! RV-8 70cc G2 FLS - Field Assembly
|-
| {{#ev:youtube|https://youtu.be/YAjm6Untg3M?si=x5IpmtID9x1n6qgS||left||}}
|}

 
{|
! RV-8 70cc FLS - Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/OWRrvH1N8fc?si=H42IL3G9QOabrJnj||left||}}
|}

 
{|
! RV-8 70cc FLS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/5C02ZmG9DzI?si=1FsX9_nbh8rwdWt3||left||}}
|}

 
{|
! RV-8 70cc FLS - Model AV8R - Episode 35
|-
| {{#ev:youtube|https://youtu.be/6RapNW7vCx4?si=y-fFaLu95PDO-bs_||left||}}
|}

 
{|
! WILL IT FIT? RV-8 70cc FLS in a Prius!
|-
| {{#ev:youtube|https://youtu.be/pIQ7sOZze5I?si=YpBhP5jJ6q_SX6o-||left||}}
|}

 
{|
! RV-8 70cc FLS - Seth Arnold at Nall In The Fall, 2021
|-
| {{#ev:youtube|https://youtu.be/B42zrqBN5U8?si=M0pZr0zvwnsVUR7e||left||}}
|}

 
{|
! RV-8 70cc FLS Overview with Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/9paTIADf8N0?si=DXAuI3piQL7n1o5Q||left||}}
|}

 
{|
! RV-8 70cc FLS Unboxing with Gonzo Hobbies
|-
| {{#ev:youtube|https://youtu.be/ObxBX-HZGFI?si=yAnDLjFTZ4VqaPzo||left||}}
|}

RV-8 70cc

2025-08-07T19:41:24Z

WikiSys:

{{DISPLAYTITLE:RV-8 70cc FLS Wiki}}
Welcome to the Flex Innovations - RV-8 70cc G1/G2 FLS Wiki
== RV-8 70cc G1/G2 FLS ==

=== Aura Help ===
* [[RV-8_70cc/FlightModes|RV-8 70cc Aura Flight Modes]]
* [[RV-8_70cc/TransmitterSetup|How to Setup your Transmitter for the RV-8 70cc with Aura]]



=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/RV-8%2070cc%20Manual%20Final.pdf RV-8 70cc Manual]
* [https://resources.flexinnovations.com/files/RV-8%2070cc%20G2_Manual%20Addendum.pdf RV-8 70cc G2 Manual Addendum]
* [https://resources.flexinnovations.com/files/RV-8_70cc_FloatSet_Manual.pdf Float Set Instruction Manual]
* [http://resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Addendums ===
* [http://resources.flexinnovations.com/files/RV70%20Rudder%20Control%20Horns%20Addendum.pdf RV-8 70cc Control Horn Addendum]

=== Product Information ===
* [https://flexinnovations.com/product/rv8-70cc/ Product Page]

=== Related YouTube Videos ===

{|
! RV-8 70cc G2 FLS - Feature Overview
|-
| {{#ev:youtube|https://youtu.be/FM6VaIfMUnM?si=NrLrJ51FnnmLHXOl||left||}}
|}

 
{|
! RV-8 70cc G2 FLS - Field Assembly
|-
| {{#ev:youtube|https://youtu.be/YAjm6Untg3M?si=x5IpmtID9x1n6qgS||left||}}
|}

 
{|
! RV-8 70cc FLS - Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/OWRrvH1N8fc?si=H42IL3G9QOabrJnj||left||}}
|}

 
{|
! RV-8 70cc FLS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/5C02ZmG9DzI?si=1FsX9_nbh8rwdWt3||left||}}
|}

 
{|
! RV-8 70cc FLS - Model AV8R - Episode 35
|-
| {{#ev:youtube|https://youtu.be/6RapNW7vCx4?si=y-fFaLu95PDO-bs_||left||}}
|}

 
{|
! WILL IT FIT? RV-8 70cc FLS in a Prius!
|-
| {{#ev:youtube|https://youtu.be/pIQ7sOZze5I?si=YpBhP5jJ6q_SX6o-||left||}}
|}

 
{|
! RV-8 70cc FLS - Seth Arnold at Nall In The Fall, 2021
|-
| {{#ev:youtube|https://youtu.be/B42zrqBN5U8?si=M0pZr0zvwnsVUR7e||left||}}
|}

 
{|
! RV-8 70cc FLS Overview with Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/9paTIADf8N0?si=DXAuI3piQL7n1o5Q||left||}}
|}

 
{|
! RV-8 70cc FLS Unboxing with Gonzo Hobbies
|-
| {{#ev:youtube|https://youtu.be/ObxBX-HZGFI?si=yAnDLjFTZ4VqaPzo||left||}}
|}

RV8 70cc/Videos

2025-08-07T19:37:58Z

WikiSys:

{{DISPLAYTITLE:RV-8 70cc FLS Videos}}

{|
! RV-8 70cc G2 FLS - Feature Overview
|-
| {{#ev:youtube|https://youtu.be/FM6VaIfMUnM?si=NrLrJ51FnnmLHXOl||left||}}
|}

 
{|
! RV-8 70cc G2 FLS - Field Assembly
|-
| {{#ev:youtube|https://youtu.be/YAjm6Untg3M?si=x5IpmtID9x1n6qgS||left||}}
|}

 
{|
! RV-8 70cc FLS - Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/OWRrvH1N8fc?si=H42IL3G9QOabrJnj||left||}}
|}

 
{|
! RV-8 70cc FLS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/5C02ZmG9DzI?si=1FsX9_nbh8rwdWt3||left||}}
|}

 
{|
! RV-8 70cc FLS - Model AV8R - Episode 35
|-
| {{#ev:youtube|https://youtu.be/6RapNW7vCx4?si=y-fFaLu95PDO-bs_||left||}}
|}

 
{|
! WILL IT FIT? RV-8 70cc FLS in a Prius!
|-
| {{#ev:youtube|https://youtu.be/pIQ7sOZze5I?si=YpBhP5jJ6q_SX6o-||left||}}
|}

 
{|
! RV-8 70cc FLS - Seth Arnold at Nall In The Fall, 2021
|-
| {{#ev:youtube|https://youtu.be/B42zrqBN5U8?si=M0pZr0zvwnsVUR7e||left||}}
|}

 
{|
! RV-8 70cc FLS Overview with Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/9paTIADf8N0?si=DXAuI3piQL7n1o5Q||left||}}
|}

 
{|
! RV-8 70cc FLS Unboxing with Gonzo Hobbies
|-
| {{#ev:youtube|https://youtu.be/ObxBX-HZGFI?si=yAnDLjFTZ4VqaPzo||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

<big>'''RV-8 70cc FLS (ELECTRIC!) - Seth Arnold - RAW'''</big>
{{#ev:youtube|https://youtu.be/olpLu_-zos0||left|}}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<big>'''RV-8 70cc FLS - Quique Somenzini - RAW'''</big>
{{#ev:youtube|https://youtu.be/9paTIADf8N0||left|}}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<big>'''RV-8 70cc FLS Overview w/Quique Somenzini'''</big>
{{#ev:youtube|https://youtu.be/9paTIADf8N0||left|}}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<big>'''WILL IT FIT?! RV-8 70cc FLS In a Prius!'''</big>
{{#ev:youtube|https://youtu.be/pIQ7sOZze5I||left|}}

RV8 70cc/Videos

2025-08-07T19:37:19Z

WikiSys:

{{DISPLAYTITLE:RV-8 70cc FLS Videos}}

=== Related YouTube Videos ===
{|
! RV-8 70cc G2 FLS - Feature Overview
|-
| {{#ev:youtube|https://youtu.be/FM6VaIfMUnM?si=NrLrJ51FnnmLHXOl||left||}}
|}

 
{|
! RV-8 70cc G2 FLS - Field Assembly
|-
| {{#ev:youtube|https://youtu.be/YAjm6Untg3M?si=x5IpmtID9x1n6qgS||left||}}
|}

 
{|
! RV-8 70cc FLS - Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/OWRrvH1N8fc?si=H42IL3G9QOabrJnj||left||}}
|}

 
{|
! RV-8 70cc FLS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/5C02ZmG9DzI?si=1FsX9_nbh8rwdWt3||left||}}
|}

 
{|
! RV-8 70cc FLS - Model AV8R - Episode 35
|-
| {{#ev:youtube|https://youtu.be/6RapNW7vCx4?si=y-fFaLu95PDO-bs_||left||}}
|}

 
{|
! WILL IT FIT? RV-8 70cc FLS in a Prius!
|-
| {{#ev:youtube|https://youtu.be/pIQ7sOZze5I?si=YpBhP5jJ6q_SX6o-||left||}}
|}

 
{|
! RV-8 70cc FLS - Seth Arnold at Nall In The Fall, 2021
|-
| {{#ev:youtube|https://youtu.be/B42zrqBN5U8?si=M0pZr0zvwnsVUR7e||left||}}
|}

 
{|
! RV-8 70cc FLS Overview with Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/9paTIADf8N0?si=DXAuI3piQL7n1o5Q||left||}}
|}

 
{|
! RV-8 70cc FLS Unboxing with Gonzo Hobbies
|-
| {{#ev:youtube|https://youtu.be/ObxBX-HZGFI?si=yAnDLjFTZ4VqaPzo||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

<big>'''RV-8 70cc FLS (ELECTRIC!) - Seth Arnold - RAW'''</big>
{{#ev:youtube|https://youtu.be/olpLu_-zos0||left|}}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<big>'''RV-8 70cc FLS - Quique Somenzini - RAW'''</big>
{{#ev:youtube|https://youtu.be/9paTIADf8N0||left|}}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<big>'''RV-8 70cc FLS Overview w/Quique Somenzini'''</big>
{{#ev:youtube|https://youtu.be/9paTIADf8N0||left|}}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<big>'''WILL IT FIT?! RV-8 70cc FLS In a Prius!'''</big>
{{#ev:youtube|https://youtu.be/pIQ7sOZze5I||left|}}

RV-8 70cc

2025-08-07T19:26:01Z

WikiSys:

Template:Main page/arf text

2025-08-07T05:04:37Z

WikiSys:

<div id="mf-users" title="ARF/ARFSV/Combos">
What are Flex Innovations ARF/ARFSV/Combo Aircraft?
The ARF/ARFSV aircraft are expertly designed for the experienced pilot who wants quality and performance! We design our ARF/ARFSV kits to be the best aircraft at your field!

* '''[[FlexJetPro90|FlexJet Pro 90mm EDF Wiki]]'''
* '''[[Edge540-120cc|Edge 540 120cc Wiki]]'''
* '''[[Extra300_60E|Extra 300 60E Pro Wiki]]'''
* '''[[Mamba|Mamba 70cc Wiki]]'''
* '''[[Mamba120|Mamba 120cc Wiki]]'''
* '''[[QQYak54_35cc|QQ Yak 54 35cc Wiki]]'''
* '''[[RV-8_70cc|RV-8 70cc Wiki]]'''
* '''[[Raven_180cc|Raven 180cc Wiki]]'''
* '''[[Ventique60e|Ventique 60e Wiki]]'''
* '''[[Ventique_60E_G2|Ventique 60E G2 Pro Wiki]]'''
</div>
<noinclude>{{languages|Template:Main page/arf text}}[[Category:Main page templates|arf text]]</noinclude>

Raven 180cc

2025-08-07T05:03:50Z

WikiSys:

{{DISPLAYTITLE:Raven 180cc Wiki}}
== Raven 180cc ==




=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/Raven%20180cc%20Manual%20Final.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/raven-180cc/ Raven 180cc Product Page]

=== Related YouTube Videos ===

{|
! Raven 180cc Announcement and Overview
|-
| {{#ev:youtube|https://youtu.be/AaWwwtQGdEA?si=WhYwhkb4WI9tT0Nt||left||}}
|}

 
{|
! Raven 180cc Flight Premiere
|-
| {{#ev:youtube|https://youtu.be/uZTWSoEPAZw?si=IeO6GmG1D3ZIiDx7||left||}}
|}

 
{|
! Raven 180cc Joe Nall Noon Demo
|-
| {{#ev:youtube|https://youtu.be/wF5FBhPz_jg?si=vLVzEc5tlxp_klRw||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Raven_180cc|Raven 180cc]]
</noinclude>

MediaWiki:Sidebar

2025-08-07T05:02:56Z

WikiSys:

Raven 180cc

2025-08-07T04:57:18Z

WikiSys: Created page with "{{DISPLAYTITLE:Raven 180cc Wiki}} == Raven 180cc == === Aura Help === * How to Setup your Transmitter for the Extra 300 60E Pro * Raven_180..."

{{DISPLAYTITLE:Raven 180cc Wiki}}
== Raven 180cc ==

=== Aura Help ===
* [[Raven_180cc/TransmitterSetup|How to Setup your Transmitter for the Extra 300 60E Pro]]
* [[Raven_180cc/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Raven_180cc/FlightModes|Extra 300 60E Pro Flight Mode Details]]



=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/Raven%20180cc%20Manual%20Final.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/raven-180cc/ Raven 180cc Product Page]

=== Related YouTube Videos ===

{|
! Raven 180cc Announcement and Overview
|-
| {{#ev:youtube|https://youtu.be/AaWwwtQGdEA?si=WhYwhkb4WI9tT0Nt||left||}}
|}

 
{|
! Raven 180cc Flight Premiere
|-
| {{#ev:youtube|https://youtu.be/uZTWSoEPAZw?si=IeO6GmG1D3ZIiDx7||left||}}
|}

 
{|
! Raven 180cc Joe Nall Noon Demo
|-
| {{#ev:youtube|https://youtu.be/wF5FBhPz_jg?si=vLVzEc5tlxp_klRw||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Raven_180cc|Raven 180cc]]
</noinclude>

Extra300 60E

2025-08-07T04:47:56Z

WikiSys:

{{DISPLAYTITLE:Extra 300 60E Pro Wiki}}
== Extra 300 60E Pro ==

=== Aura Help ===
* [[Extra300_60E/TransmitterSetup|How to Setup your Transmitter for the Extra 300 60E Pro]]
* [[Extra300_60E/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Extra300_60E/FlightModes|Extra 300 60E Pro Flight Mode Details]]



=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/Extra%20300%2060E%20Pro%20Manual_v1.0_final.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/extra-300-60e-pro/ Extra 300 60E Pro Product Page]

=== Related YouTube Videos ===

{|
! Extra 300 60E G2 PRO Overview
|-
| {{#ev:youtube|https://youtu.be/N8GPjYdEx90?si=cs225UoquDyYBQUY||left||}}
|}

 
{|
! Flex Innovations Extra 300 60E Pro
|-
| {{#ev:youtube|https://youtu.be/eUqVg8JJlrs?si=UqVnwPpNwhdYfo_L||left||}}
|}

 
{|
! Flex Extra 300 50E Pro Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/6G40ooY-T-s?si=Y2K-dRfPeCHoZHvk||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Extra30060E|Extra 300 60E]]
</noinclude>

Extra300 60E/FlightModes

2025-08-07T04:46:54Z

WikiSys: Created page with "{{DISPLAYTITLE:Extra 300 60E Pro Flight Mode Details}} __FORCETOC__  == Extra 300 60E Pro Flight Mode..."

{{DISPLAYTITLE:Extra 300 60E Pro Flight Mode Details}}
__FORCETOC__ 
== Extra 300 60E Pro Flight Modes ==

There is only one Stock profile for the Extra 300 60E Pro, but the Quick Set feature allows the pilot to change:
* Enabled/Disable a Gyro Gain Kill switch via a 2 Position Switch on Ch7/Aux2 (Gyro Gain Kill switch is initially Disabled, but can be ENABLED)

{| class="wikitable"
|+ Extra 300 60E Pro Flight Modes
| style="width: 100%; vertical-align:top" |
=== Extra 300 60E Pro - Stock Flight Modes ===
The Extra 300 60E Pro ships with the 'Stock Flight Modes' detailed below:

* '''Flight Mode 1: Sport (3Axis - Gyro On)'''
** For general flight
** Rates are low and expos are tuned for general flight
** Gyro Gains are ON and set low

* '''Flight Mode 2: XA (3 Axis - Gyro On)'''
** For Extreme Aerobatics like tumbles and spins while at higher airspeed
** Rates are high and expos are tuned for agressive, high speed flight
** Gyro Gains are ON and set low.

* ''' Flight Mode 3: Slow Speed 3D (3Axis - Gyro On)'''
** For slow speed 3D flight
** Rates are highest and expos are tuned for 3D Flight
** Gyro Gains are ON and set to their highest setting.
*** Will oscillate at mid to high speed flight. Do NOT fly at mid to high speeds in this Flight Mode.

|}

== Extra 300 60E Pro Options ==
* [[Extra300_60E/GyroGainKill|How to use Enable Gyro Gain Kill Switch with QuickSet from your Transmitter]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Extra300_60E|Extra 300 60E Pro]]
</noinclude>

Template:Main page/arf text

2025-08-07T04:45:00Z

WikiSys:

<div id="mf-users" title="ARF/ARFSV/Combos">
What are Flex Innovations ARF/ARFSV/Combo Aircraft?
The ARF/ARFSV aircraft are expertly designed for the experienced pilot who wants quality and performance! We design our ARF/ARFSV kits to be the best aircraft at your field!

* '''[[FlexJetPro90|FlexJet Pro 90mm EDF Wiki]]'''
* '''[[Edge540-120cc|Edge 540 120cc Wiki]]'''
* '''[[Extra300_60E|Extra 300 60E Pro Wiki]]'''
* '''[[Mamba|Mamba 70cc Wiki]]'''
* '''[[Mamba120|Mamba 120cc Wiki]]'''
* '''[[QQYak54_35cc|QQ Yak 54 35cc Wiki]]'''
* '''[[RV-8_70cc|RV-8 70cc Wiki]]'''
* '''[[Ventique60e|Ventique 60e Wiki]]'''
* '''[[Ventique_60E_G2|Ventique 60E G2 Pro Wiki]]'''
</div>
<noinclude>{{languages|Template:Main page/arf text}}[[Category:Main page templates|arf text]]</noinclude>

MediaWiki:Sidebar

2025-08-07T04:44:14Z

WikiSys:

Extra300 60E/GyroGainKill

2025-08-07T04:43:28Z

WikiSys: Created page with "{{DISPLAYTITLE:How to Enable/Disable the Gyro Gain Switch using Quick Set from your Transmitter}} __FORCETOC__ <!-- This forces the Table of Contents since it has less than 3..."

{{DISPLAYTITLE:How to Enable/Disable the Gyro Gain Switch using Quick Set from your Transmitter}}
__FORCETOC__ 
== Gyro Gain Kill Switch Quick Set Procedure for Extra 300 60E Pro ==

To enter Quick Set mode, the Aura must receive a valid signal from the Receiver when the Aura is powered up.

Make sure your Transmitter is setup with your CH7/Aux2 channel assigned to a 2 Position switch for the Gyro Gain Kill switch.

=== Step 1 - Enter Quick Set mode ===
# Make sure all power is off on the Airplane
#* Remove the prop before making changes with Quick Set
# Turn on your transmitter
# Remove the Servo lead from Aura Port S2.
# Put a bind plug in Aura Port S2.
# Plug in the battery to power up the Airplane
# The Orange LED will be OFF while the Green LED is ON indicating you are in the Quick Set mode and receiving a valid signal from the Receiver.

=== Step 2 - Choose Gyro Gain Kill Switch Option ===
After entering Quick Set mode as described above, toggle the CH7/Aux2 channel switch on the transmitter to ENABLE or DISABLE the Gyro Gain Kill switch.
# If the Blue LED is ON, the Gyro Gain Kill switch option is ENABLED in the Aura.
# If the Blue LED is OFF, the Gyro Gain Kill switch option is DISABLED in the Aura.

=== Step 3 - Save the Gyro Gain Kill Switch Option ===
# After correctly toggling the CH7/Aux2 switch to Enable or Disable the Gyro Gain Kill switch option, '''remove the bind plug save the settings'''.
# The LEDs will turn on while the Aura is saving, then will go back to their previous state.
# Completely power off the Airplane and Aura
# Replace the Servo Lead in Aura Port S2
# Power up, confirm that the Gyro Gain Kill switch can kill the Gyro Gain with the CH7/Aux2 Switch and Fly!

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Extra300_60E|Extra 300 60E Pro]]
</noinclude>

Extra300 60E/TransmitterSetup

2025-08-07T04:42:35Z

WikiSys: Created page with "{{DISPLAYTITLE:How to Setup your Transmitter for the Extra 300 60E Pro}} __FORCETOC__  == Transmitter..."

{{DISPLAYTITLE:How to Setup your Transmitter for the Extra 300 60E Pro}}
__FORCETOC__ 
== Transmitter Model Setup Procedure ==
# Create a Blank Transmitter Airplane Model with 1 Throttle, 1 Aileron, 1 Elevator, 1 Rudder and any Flaps or Flap System OFF.
# Assign the Transmitter's Ch5/Gear channel to a 3 Position switch to change the Flight Modes in flight
# (Optional) Assign the Transmitter's Ch7/Aux2 Channel to a 2 Position switch to function as a Gyro Gain Kill switch in flight
#* The Gyro Gain Kill functionality is initially Disabled by default, [[Extra300_60E/GyroGainKill|but can be Enabled using Quick Set with your Transmitter]]
# Adjust Aileron, Elevator, Rudder and Throttle End Points (aka Travel Limits or ATV) as shown in the table below for your Transmitter brand
# Verify the rest of the settings as shown in the table below for your Transmitter brand

{| class="wikitable" style="text-align: center"
|+ Transmitter Setup
!style="width: 40%" | !!style="width: 20%" | Spektrum, Futaba, JR & Graupner !!style="width: 20%" | FrSky !!style="width: 20%" | Jeti (EX-Bus)
|-
| '''Wing/Tail Type''' || 1 Aileron, 1 Elevator, 1 Rudder || 1 Aileron, 1 Elevator, 1 Rudder || 1 Aileron, 1 Elevator, 1 Rudder
|-
| '''End Points (Travel Adjust or ATV)''' || Ail/Ele/Rud: 125%|| Ail/Ele/Rud: 100% || Ail/Ele/Rud: 100%
|-
| '''Throttle End Points (Travel Adjust or ATV)''' || Thr: 100%|| Thr: 84%|| Thr: 80%
|-
| '''Reversing''' ||colspan=3 | Not Allowed
|-
| '''Sub-Trim''' || colspan=3 | Verify at Zero, NOT ALLOWED
|-
| '''Trim Levers''' || colspan=3 | Verify at Zero
|-
| '''Flight Mode Switch: CH5/Gear''' || colspan=3 | Assign the CH5/Gear channel to a 3 Position switch
|-
| '''Gyro Gain Kill Switch: CH7/Aux2**'''|| colspan=3 | Assign the CH7/Aux2 channel to a 2 Position switch (Optional)
|-
| '''First Flight Timer'''|| colspan=3 | For your first flight, set to 4:00
|}

'''<nowiki> ** </nowiki>''' - The Gyro Gain Kill Switch is initially Disabled and can be Enabled using Quick Set from your Transmitter as detailed below

== Extra 300 60E Pro Options ==
* [[Extra300_60E/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]



<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Extra300_60E|Extra 300 60E Pro]]
</noinclude>

Extra300 60E

2025-08-07T04:40:29Z

WikiSys: Created page with "{{DISPLAYTITLE:Extra 300 60E Pro Wiki}} == Extra 300 60E Pro == === Aura Help === * How to Setup your Transmitter for the Extra 300 60E Pro..."

{{DISPLAYTITLE:Extra 300 60E Pro Wiki}}
== Extra 300 60E Pro ==

=== Aura Help ===
* [[Extra300_60E/TransmitterSetup|How to Setup your Transmitter for the Extra 300 60E Pro]]
* [[Extra300_60E/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Extra300_60E/FlightModes|Extra 300 60E Pro Flight Mode Details]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/Ventique_60E_G2_PRO_Manual_v1.0_FINAL.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/extra-300-60e-pro/ Extra 300 60E Pro Product Page]

=== Related YouTube Videos ===

{|
! Extra 300 60E G2 PRO Overview
|-
| {{#ev:youtube|https://youtu.be/N8GPjYdEx90?si=cs225UoquDyYBQUY||left||}}
|}

 
{|
! Flex Innovations Extra 300 60E Pro
|-
| {{#ev:youtube|https://youtu.be/eUqVg8JJlrs?si=UqVnwPpNwhdYfo_L||left||}}
|}

 
{|
! Flex Extra 300 50E Pro Jase Dussia
|-
| {{#ev:youtube|https://youtu.be/6G40ooY-T-s?si=Y2K-dRfPeCHoZHvk||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Extra30060E|Extra 300 60E]]
</noinclude>

Ventique 60E G2/FlightModes

2025-08-07T00:57:29Z

WikiSys: Created page with "{{DISPLAYTITLE:Ventique 60E G2 Pro Flight Mode Details}} __FORCETOC__  == Ventique 60E G2 Pro Flight..."

{{DISPLAYTITLE:Ventique 60E G2 Pro Flight Mode Details}}
__FORCETOC__ 
== Ventique 60E G2 Pro Flight Modes ==

There is only one Stock profile for the Ventique 60E G2 Pro, but the Quick Set feature allows the pilot to change:
* Enabled/Disable a Gyro Gain Kill switch via a 2 Position Switch on Ch7/Aux2 (Gyro Gain Kill switch is initially Disabled, but can be ENABLED)

{| class="wikitable"
|+ Ventique 60E G2 Pro Flight Modes
| style="width: 100%; vertical-align:top" |
=== Ventique 60E G2 Pro - Stock Flight Modes ===
The Ventique 60E G2 Pro ships with the 'Stock Flight Modes' detailed below:

* '''Flight Mode 1: Sport (3Axis - Gyro On)'''
** For general flight
** Rates are low and expos are tuned for general flight
** Gyro Gains are ON and set low

* '''Flight Mode 2: XA (3 Axis - Gyro On)'''
** For Extreme Aerobatics like tumbles and spins while at higher airspeed
** Rates are high and expos are tuned for agressive, high speed flight
** Gyro Gains are ON and set low.

* ''' Flight Mode 3: Slow Speed 3D (3Axis - Gyro On)'''
** For slow speed 3D flight
** Rates are highest and expos are tuned for 3D Flight
** Gyro Gains are ON and set to their highest setting.
*** Will oscillate at mid to high speed flight. Do NOT fly at mid to high speeds in this Flight Mode.

|}

== Ventique 60E G2 Pro Options ==
* [[Ventique_60E_G2/GyroGainKill|How to use Enable Gyro Gain Kill Switch with QuickSet from your Transmitter]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Ventique_60E_G2|Ventique 60E G2 Pro]]
</noinclude>

Laser200 60E/FlightModes

2025-08-07T00:53:24Z

WikiSys:

{{DISPLAYTITLE:Laser 200 60E Flight Mode Details}}
__FORCETOC__ 
== Laser 200 60E Flight Modes ==

There is only one Stock profile for the Laser 200 60E, but the Quick Set feature allows the pilot to change:
* Enabled/Disable a Gyro Gain Kill switch via a 2 Position Switch on Ch7/Aux2 (Gyro Gain Kill switch is initially Disabled, but can be ENABLED)

{| class="wikitable"
|+ Laser 200 60E Flight Modes
| style="width: 100%; vertical-align:top" |
=== Laser 200 60E - Stock Flight Modes ===
The Laser 200 60E ships with the 'Stock Flight Modes' detailed below:

* '''Flight Mode 1: Sport (Gyro On)'''
** For general flight
** Rates are low and expos are tuned for general flight
** Gyro Gains are ON and set low

* '''Flight Mode 2: Advanced (Gyro On)'''
** For more advanced aerobatics like tumbles and spins while at higher airspeed
** Rates are high and expos are tuned for comfortable flight
** Gyro Gains are ON and set low.

* ''' Flight Mode 3: Slow Speed 3D (Gyro On)'''
** For slow speed 3D flight
** Rates are highest and expos are tuned for comfortable flight
** Gyro Gains are ON and set to their highest setting.
*** May oscillate in high speed flight under certain conditions

|}

== Laser 200 60E Options ==
* [[Laser200_60E/GyroGainKill|How to use Enable Gyro Gain Kill Switch with QuickSet from your Transmitter]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser200_60E|Laser 200 60E]]
</noinclude>

MediaWiki:Sidebar

2025-08-07T00:52:11Z

WikiSys:

Template:Main page/arf text

2025-08-07T00:51:40Z

WikiSys:

<div id="mf-users" title="ARF/ARFSV/Combos">
What are Flex Innovations ARF/ARFSV/Combo Aircraft?
The ARF/ARFSV aircraft are expertly designed for the experienced pilot who wants quality and performance! We design our ARF/ARFSV kits to be the best aircraft at your field!

* '''[[FlexJetPro90|FlexJet Pro 90mm EDF Wiki]]'''
* '''[[Edge540-120cc|Edge 540 120cc Wiki]]'''
* '''[[Mamba|Mamba 70cc Wiki]]'''
* '''[[Mamba120|Mamba 120cc Wiki]]'''
* '''[[QQYak54_35cc|QQ Yak 54 35cc Wiki]]'''
* '''[[RV-8_70cc|RV-8 70cc Wiki]]'''
* '''[[Ventique60e|Ventique 60e Wiki]]'''
* '''[[Ventique6_60E_G2|Ventique 60E G2 Pro Wiki]]'''
</div>
<noinclude>{{languages|Template:Main page/arf text}}[[Category:Main page templates|arf text]]</noinclude>

MediaWiki:Sidebar

2025-08-07T00:50:29Z

WikiSys:

Ventique 60E G2/GyroGainKill

2025-08-07T00:49:28Z

{{DISPLAYTITLE:How to Enable/Disable the Gyro Gain Switch using Quick Set from your Transmitter}}
__FORCETOC__ 
== Gyro Gain Kill Switch Quick Set Procedure for Ventique 60E G2 Pro ==

To enter Quick Set mode, the Aura must receive a valid signal from the Receiver when the Aura is powered up.

Make sure your Transmitter is setup with your CH7/Aux2 channel assigned to a 2 Position switch for the Gyro Gain Kill switch.

=== Step 1 - Enter Quick Set mode ===
# Make sure all power is off on the Airplane
#* Remove the prop before making changes with Quick Set
# Turn on your transmitter
# Remove the Servo lead from Aura Port S2.
# Put a bind plug in Aura Port S2.
# Plug in the battery to power up the Airplane
# The Orange LED will be OFF while the Green LED is ON indicating you are in the Quick Set mode and receiving a valid signal from the Receiver.

=== Step 2 - Choose Gyro Gain Kill Switch Option ===
After entering Quick Set mode as described above, toggle the CH7/Aux2 channel switch on the transmitter to ENABLE or DISABLE the Gyro Gain Kill switch.
# If the Blue LED is ON, the Gyro Gain Kill switch option is ENABLED in the Aura.
# If the Blue LED is OFF, the Gyro Gain Kill switch option is DISABLED in the Aura.

=== Step 3 - Save the Gyro Gain Kill Switch Option ===
# After correctly toggling the CH7/Aux2 switch to Enable or Disable the Gyro Gain Kill switch option, '''remove the bind plug save the settings'''.
# The LEDs will turn on while the Aura is saving, then will go back to their previous state.
# Completely power off the Airplane and Aura
# Replace the Servo Lead in Aura Port S2
# Power up, confirm that the Gyro Gain Kill switch can kill the Gyro Gain with the CH7/Aux2 Switch and Fly!

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Ventique_60E_G2|Ventique 60E G2 Pro]]
</noinclude>

Ventique 60E G2/TransmitterSetup

2025-08-07T00:48:11Z

WikiSys: Created page with "{{DISPLAYTITLE:How to Setup your Transmitter for the Ventique 60E G2 Pro}} __FORCETOC__  == Transmitt..."

{{DISPLAYTITLE:How to Setup your Transmitter for the Ventique 60E G2 Pro}}
__FORCETOC__ 
== Transmitter Model Setup Procedure ==
# Create a Blank Transmitter Airplane Model with 1 Throttle, 1 Aileron, 1 Elevator, 1 Rudder and any Flaps or Flap System OFF.
# Assign the Transmitter's Ch5/Gear channel to a 3 Position switch to change the Flight Modes in flight
# (Optional) Assign the Transmitter's Ch7/Aux2 Channel to a 2 Position switch to function as a Gyro Gain Kill switch in flight
#* The Gyro Gain Kill functionality is initially Disabled by default, [[Ventique_60E_G2/GyroGainKill|but can be Enabled using Quick Set with your Transmitter]]
# Adjust Aileron, Elevator, Rudder and Throttle End Points (aka Travel Limits or ATV) as shown in the table below for your Transmitter brand
# Verify the rest of the settings as shown in the table below for your Transmitter brand

{| class="wikitable" style="text-align: center"
|+ Transmitter Setup
!style="width: 40%" | !!style="width: 20%" | Spektrum, Futaba, JR & Graupner !!style="width: 20%" | FrSky !!style="width: 20%" | Jeti (EX-Bus)
|-
| '''Wing/Tail Type''' || 1 Aileron, 1 Elevator, 1 Rudder || 1 Aileron, 1 Elevator, 1 Rudder || 1 Aileron, 1 Elevator, 1 Rudder
|-
| '''End Points (Travel Adjust or ATV)''' || Ail/Ele/Rud: 125%|| Ail/Ele/Rud: 100% || Ail/Ele/Rud: 100%
|-
| '''Throttle End Points (Travel Adjust or ATV)''' || Thr: 100%|| Thr: 84%|| Thr: 80%
|-
| '''Reversing''' ||colspan=3 | Not Allowed
|-
| '''Sub-Trim''' || colspan=3 | Verify at Zero, NOT ALLOWED
|-
| '''Trim Levers''' || colspan=3 | Verify at Zero
|-
| '''Flight Mode Switch: CH5/Gear''' || colspan=3 | Assign the CH5/Gear channel to a 3 Position switch
|-
| '''Gyro Gain Kill Switch: CH7/Aux2**'''|| colspan=3 | Assign the CH7/Aux2 channel to a 2 Position switch (Optional)
|-
| '''First Flight Timer'''|| colspan=3 | For your first flight, set to 4:00
|}

'''<nowiki> ** </nowiki>''' - The Gyro Gain Kill Switch is initially Disabled and can be Enabled using Quick Set from your Transmitter as detailed below

== Ventique 60E G2 Pro Options ==
* [[Ventique_60E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]



<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Ventique_60E_G2|Ventique 60E G2 Pro]]
</noinclude>

Ventique 60E G2

2025-08-07T00:45:19Z

WikiSys:

{{DISPLAYTITLE:Ventique 60E G2 Pro Wiki}}
== Ventique 60E G2 Pro ==

=== Aura Help ===
* [[Ventique_60E_G2/TransmitterSetup|How to Setup your Transmitter for the Ventique 60E G2 Pro]]
* [[Ventique_60E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Ventique_60E_G2/FlightModes|Ventique 60E G2 Pro Flight Mode Details]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/Ventique_60E_G2_PRO_Manual_v1.0_FINAL.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/ventique-60e-g2-pro-arf-arfsv/ Ventique 60E G2 Pro Product Page]

=== Related YouTube Videos ===

{|
! Ventique 60E G2 PRO Super PNP Assembly
|-
| {{#ev:youtube|https://youtu.be/IUo5VG8vCOQ?si=0TexrwZb1NghNzyd||left||}}
|}

 
{|
! Lane Walker & Jase Dussia fly the Ventique 60E G2 PRO @ Joe Nall E-Demo 2024
|-
| {{#ev:youtube|https://youtu.be/LT04LIlOvLI?si=8TmLZ6pTIjtXJj7y||left||}}
|}

 
{|
! Jase Dussia flies the Ventique 60E G2 PRO @ Joe Nall Electric 3D Line
|-
| {{#ev:youtube|https://youtu.be/9HpzLKidTwI?si=Kt-1GyFP5LlpD3g_||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/1fVF1oMYEmU?si=01tkULiFfxu-LOPy||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/1yDaEZqSi9E?si=AN5YSH41Y_wam4Yp||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser20060E|Laser 200 60E]]
</noinclude>

Ventique 60E G2

2025-08-07T00:44:40Z

WikiSys:

{{DISPLAYTITLE:Ventique 60E G2 Pro Wiki}}
== Ventique 60E G2 Pro ==

=== Aura Help ===
* [[Ventique_60E_G2/TransmitterSetup|How to Setup your Transmitter for the Laser 200 60E]]
* [[Ventique_60E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Ventique_60E_G2/FlightModes|Laser 200 60E Flight Mode Details]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/Ventique_60E_G2_PRO_Manual_v1.0_FINAL.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/ventique-60e-g2-pro-arf-arfsv/ Ventique 60E G2 Pro Product Page]

=== Related YouTube Videos ===

{|
! Ventique 60E G2 PRO Super PNP Assembly
|-
| {{#ev:youtube|https://youtu.be/IUo5VG8vCOQ?si=0TexrwZb1NghNzyd||left||}}
|}

 
{|
! Lane Walker & Jase Dussia fly the Ventique 60E G2 PRO @ Joe Nall E-Demo 2024
|-
| {{#ev:youtube|https://youtu.be/LT04LIlOvLI?si=8TmLZ6pTIjtXJj7y||left||}}
|}

 
{|
! Jase Dussia flies the Ventique 60E G2 PRO @ Joe Nall Electric 3D Line
|-
| {{#ev:youtube|https://youtu.be/9HpzLKidTwI?si=Kt-1GyFP5LlpD3g_||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/1fVF1oMYEmU?si=01tkULiFfxu-LOPy||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/1yDaEZqSi9E?si=AN5YSH41Y_wam4Yp||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser20060E|Laser 200 60E]]
</noinclude>

Ventique 60E G2

2025-08-07T00:44:08Z

WikiSys: Created page with "{{DISPLAYTITLE:Ventique 60E G2 Pro Wiki}} == Ventique 60E G2 Pro == === Aura Help === * Ventique_60E_G2/TransmitterSetup|How to Setup your Transmitter for the Laser 200 60E..."

{{DISPLAYTITLE:Ventique 60E G2 Pro Wiki}}
== Ventique 60E G2 Pro ==

=== Aura Help ===
* [[Ventique_60E_G2/TransmitterSetup|How to Setup your Transmitter for the Laser 200 60E]]
* [[Ventique_60E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Ventique_60E_G2/FlightModes|Laser 200 60E Flight Mode Details]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/Ventique_60E_G2_PRO_Manual_v1.0_FINAL.pdf Instruction Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/ventique-60e-g2-pro-arf-arfsv/ Ventique 60E G2 Pro Product Page]

=== Related YouTube Videos ===

{|
! Ventique 60E G2 PRO Super PNP Assembly
|-
| {{#ev:youtube|https://youtu.be/IUo5VG8vCOQ?si=0TexrwZb1NghNzyd||left||}}
|}

 
{|
! Lane Walker & Jase Dussia fly the Ventique 60E G2 PRO @ Joe Nall E-Demo 2024
|-
| {{#ev:youtube|https://youtu.be/LT04LIlOvLI?si=8TmLZ6pTIjtXJj7y||left||}}
|}

 
{|
! Jase Dussia flies the Ventique 60E G2 PRO @ Joe Nall Electric 3D Line
|-
| {{#ev:youtube|https://youtu.be/9HpzLKidTwI?si=Kt-1GyFP5LlpD3g_||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/1fVF1oMYEmU?si=01tkULiFfxu-LOPy||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/1yDaEZqSi9E?si=AN5YSH41Y_wam4Yp||left||}}
|}

 
{|
! Jase Dussia – Ventique 60E G2 PRO Super PNP
|-
| {{#ev:youtube|https://youtu.be/wuEYf6o9Z5k?si=eyIXiJSqrgp4x6PN||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser20060E|Laser 200 60E]]
</noinclude>

MediaWiki:Sidebar

2025-08-07T00:22:47Z

WikiSys:

Template:Main page/superpnp text

2025-08-07T00:22:21Z

WikiSys:

<div id="mf-users" title="Aura AFCS">
What are Flex Innovations Super PNP Aircraft?

Our proprietary Super PNP Aircraft are delivered only needing a receiver, a battery, and a quick assembly! Each aircraft comes with the motor, ESC, servos, and Aura installed and ready for flight.
* '''[[Cessna170PNP|Cessna 170 60E Wiki]]'''
* '''[[Cessna170_60E_G2|Cessna 170 60E G2 Wiki]]'''
* '''[[Cypher|Cypher VTOL Wiki]]'''
* '''[[F-100D_90mm_EDF|F-100D 90mm EDF Wiki]]'''
* '''[[FlexJet|FlexJet Wiki]]'''
* '''[[FlexJetTV|FlexJet TV Wiki]]'''
* '''[[Laser200_60E|Laser 200 60E Wiki]]'''
* '''[[Mamba_10E|Mamba 10E Wiki]]'''
* '''[[Mamba_10E_G2_6S|Mamba 10E G2 (6S) Wiki]]'''
* '''[[Mamba60|Mamba 60E Wiki]]'''
* '''[[Pirana|Piraña Wiki]]'''
* '''[[QQCap232EX|QQ CAP 232EX 60E Wiki]]'''
* '''[[QQExtra300|QQ Extra 300 Wiki]]'''
* '''[[QQYak5510E|QQ Yak 55 10E Wiki]]'''
* '''[[Rv-8_10|RV-8 10E Wiki]]'''
* '''[[RV-8_10E_G2|RV-8 10E G2 Wiki]]'''
* '''[[RV8|RV-8 60E Wiki]]'''
* '''[[RV-8_60E_G2|RV-8 60E G2 Wiki]]'''
* '''[[TwinOtter_80E|Twin Otter 80E Wiki]]'''
</div>
<noinclude>{{languages|Template:Main page/superpnp text}}[[Category:Main page templates|superpnp text]]</noinclude>

Laser200 60E/FlightModes

2025-08-07T00:21:53Z

WikiSys: Created page with "{{DISPLAYTITLE:Laser 200 60E Flight Mode Details}} __FORCETOC__  == Laser 200 60E Flight Modes == Th..."

{{DISPLAYTITLE:Laser 200 60E Flight Mode Details}}
__FORCETOC__ 
== Laser 200 60E Flight Modes ==

There is only one Stock profile for the Laser 200 60E, but the Quick Set feature allows the pilot to changes:
* Enabled/Disable a Gyro Gain Kill switch via a 2 Position Switch on Ch7/Aux2 (Gyro Gain Kill switch is initially Disabled, but can be ENABLED)

{| class="wikitable"
|+ Laser 200 60E Flight Modes
| style="width: 100%; vertical-align:top" |
=== Laser 200 60E - Stock Flight Modes ===
The Laser 200 60E ships with the 'Stock Flight Modes' detailed below:

* '''Flight Mode 1: Sport (Gyro On)'''
** For general flight
** Rates are low and expos are tuned for general flight
** Gyro Gains are ON and set low

* '''Flight Mode 2: Advanced (Gyro On)'''
** For more advanced aerobatics like tumbles and spins while at higher airspeed
** Rates are high and expos are tuned for comfortable flight
** Gyro Gains are ON and set low.

* ''' Flight Mode 3: Slow Speed 3D (Gyro On)'''
** For slow speed 3D flight
** Rates are highest and expos are tuned for comfortable flight
** Gyro Gains are ON and set to their highest setting.
*** May oscillate in high speed flight under certain conditions

|}

== Laser 200 60E Options ==
* [[Laser200_60E/GyroGainKill|How to use Enable Gyro Gain Kill Switch with QuickSet from your Transmitter]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser200_60E|Laser 200 60E]]
</noinclude>

RV-8 10E G2/GyroGainKill

2025-08-07T00:15:27Z

WikiSys:

{{DISPLAYTITLE:How to Enable/Disable the Gyro Gain Switch using Quick Set from your Transmitter}}
__FORCETOC__ 
== Gyro Gain Kill Switch Quick Set Procedure for RV-8 10E G2 ==

To enter Quick Set mode, the Aura must receive a valid signal from the Receiver when the Aura is powered up.

Make sure your Transmitter is setup with your CH7/Aux2 channel assigned to a 2 Position switch for the Gyro Gain Kill switch.

=== Step 1 - Enter Quick Set mode ===
# Make sure all power is off on the Airplane
#* Remove the prop before making changes with Quick Set
# Turn on your transmitter
# Remove the Servo lead from Aura Port S2.
# Put a bind plug in Aura Port S2.
# Plug in the battery to power up the Airplane
# The Orange LED will be OFF while the Green LED is ON indicating you are in the Quick Set mode and receiving a valid signal from the Receiver.

=== Step 2 - Choose Gyro Gain Kill Switch Option ===
After entering Quick Set mode as described above, toggle the CH7/Aux2 channel switch on the transmitter to ENABLE or DISABLE the Gyro Gain Kill switch.
# If the Blue LED is ON, the Gyro Gain Kill switch option is ENABLED in the Aura.
# If the Blue LED is OFF, the Gyro Gain Kill switch option is DISABLED in the Aura.

=== Step 3 - Save the Gyro Gain Kill Switch Option ===
# After correctly toggling the CH7/Aux2 switch to Enable or Disable the Gyro Gain Kill switch option, '''remove the bind plug save the settings'''.
# The LEDs will turn on while the Aura is saving, then will go back to their previous state.
# Completely power off the Airplane and Aura
# Replace the Servo Lead in Aura Port S2
# Power up, confirm that the Gyro Gain Kill switch can kill the Gyro Gain with the CH7/Aux2 Switch and Fly!

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

Laser200 60E/GyroGainKill

2025-08-07T00:15:04Z

{{DISPLAYTITLE:How to Enable/Disable the Gyro Gain Switch using Quick Set from your Transmitter}}
__FORCETOC__ 
== Gyro Gain Kill Switch Quick Set Procedure for Laser 200 60E ==

To enter Quick Set mode, the Aura must receive a valid signal from the Receiver when the Aura is powered up.

Make sure your Transmitter is setup with your CH7/Aux2 channel assigned to a 2 Position switch for the Gyro Gain Kill switch.

=== Step 1 - Enter Quick Set mode ===
# Make sure all power is off on the Airplane
#* Remove the prop before making changes with Quick Set
# Turn on your transmitter
# Remove the Servo lead from Aura Port S2.
# Put a bind plug in Aura Port S2.
# Plug in the battery to power up the Airplane
# The Orange LED will be OFF while the Green LED is ON indicating you are in the Quick Set mode and receiving a valid signal from the Receiver.

=== Step 2 - Choose Gyro Gain Kill Switch Option ===
After entering Quick Set mode as described above, toggle the CH7/Aux2 channel switch on the transmitter to ENABLE or DISABLE the Gyro Gain Kill switch.
# If the Blue LED is ON, the Gyro Gain Kill switch option is ENABLED in the Aura.
# If the Blue LED is OFF, the Gyro Gain Kill switch option is DISABLED in the Aura.

=== Step 3 - Save the Gyro Gain Kill Switch Option ===
# After correctly toggling the CH7/Aux2 switch to Enable or Disable the Gyro Gain Kill switch option, '''remove the bind plug save the settings'''.
# The LEDs will turn on while the Aura is saving, then will go back to their previous state.
# Completely power off the Airplane and Aura
# Replace the Servo Lead in Aura Port S2
# Power up, confirm that the Gyro Gain Kill switch can kill the Gyro Gain with the CH7/Aux2 Switch and Fly!

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser200_60E|Laser 200 60E]]
</noinclude>

Laser200 60E/TransmitterSetup

2025-08-07T00:13:17Z

WikiSys: Created page with "{{DISPLAYTITLE:How to Setup your Transmitter for the Laser 200 60E}} __FORCETOC__  == Transmitter Mod..."

{{DISPLAYTITLE:How to Setup your Transmitter for the Laser 200 60E}}
__FORCETOC__ 
== Transmitter Model Setup Procedure ==
# Create a Blank Transmitter Airplane Model with 1 Throttle, 1 Aileron, 1 Elevator, 1 Rudder and any Flaps or Flap System OFF.
# Assign the Transmitter's Ch5/Gear channel to a 3 Position switch to change the Flight Modes in flight
# Assign the Transmitter's CH6/Aux1 Channel to a 2 Position switch to control the night LEDs in flight
# (Optional) Assign the Transmitter's Ch7/Aux2 Channel to a 2 Position switch to function as a Gyro Gain Kill switch in flight
#* The Gyro Gain Kill functionality is initially Disabled by default, [[Laser200_60E/GyroGainKill|but can be Enabled using Quick Set with your Transmitter]]
# Adjust Aileron, Elevator, Rudder and Throttle End Points (aka Travel Limits or ATV) as shown in the table below for your Transmitter brand
# Verify the rest of the settings as shown in the table below for your Transmitter brand

{| class="wikitable" style="text-align: center"
|+ Transmitter Setup
!style="width: 40%" | !!style="width: 20%" | Spektrum, Futaba, JR & Graupner !!style="width: 20%" | FrSky !!style="width: 20%" | Jeti (EX-Bus)
|-
| '''Wing/Tail Type''' || 1 Aileron, 1 Elevator, 1 Rudder || 1 Aileron, 1 Elevator, 1 Rudder || 1 Aileron, 1 Elevator, 1 Rudder
|-
| '''End Points (Travel Adjust or ATV)''' || Ail/Ele/Rud: 125%|| Ail/Ele/Rud: 100% || Ail/Ele/Rud: 100%
|-
| '''Throttle End Points (Travel Adjust or ATV)''' || Thr: 100%|| Thr: 84%|| Thr: 80%
|-
| '''Reversing''' ||colspan=3 | Not Allowed
|-
| '''Sub-Trim''' || colspan=3 | Verify at Zero, NOT ALLOWED
|-
| '''Trim Levers''' || colspan=3 | Verify at Zero
|-
| '''Flight Mode Switch: CH5/Gear''' || colspan=3 | Assign the CH5/Gear channel to a 3 Position switch
|-
| '''LEDs Switch: CH6/Aux1''' || colspan=3 | Assign the CH6/Aux1 channel to a 2 Position switch
|-
| '''Gyro Gain Kill Switch: CH7/Aux2**'''|| colspan=3 | Assign the CH7/Aux2 channel to a 2 Position switch (Optional)
|-
| '''First Flight Timer'''|| colspan=3 | For your first flight, set to 4:00
|}

'''<nowiki> ** </nowiki>''' - The Gyro Gain Kill Switch is initially Disabled and can be Enabled using Quick Set from your Transmitter as detailed below

== Laser 200 60E Options ==
* [[Laser200_60E/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]



<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

Laser200 60E

2025-08-07T00:07:59Z

WikiSys: Created page with "{{DISPLAYTITLE:Laser 200 60E Wiki}} == Laser 200 60E == === Aura Help === * How to Setup your Transmitter for the Laser 200 60E * Laser200..."

{{DISPLAYTITLE:Laser 200 60E Wiki}}
== Laser 200 60E ==

=== Aura Help ===
* [[Laser200_60E/TransmitterSetup|How to Setup your Transmitter for the Laser 200 60E]]
* [[Laser200_60E/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[Laser200_60E/FlightModes|Laser 200 60E Flight Mode Details]]



=== Latest Manuals ===
* [https://resources.flexinnovations.com/files/Laser%20200%2060E_Quick_Start_Guide_V1.1_FINAL.pdf Quick Start Guide] (English)
* [https://resources.flexinnovations.com/files/Laser%20200%2060E%20Super%20PNP%20Manual%20English%20v1.0%20-%20Final.pdf Instruction Manual] (English)
* [https://resources.flexinnovations.com/files/Laser%20200%20Hinge%20Backers.zip Laser 200 60E Hinge Backers]

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/laser-200-60e/ Laser 200 60E Product Page]

=== Related YouTube Videos ===

{|
! Flex Laser 200 60E at SEFF 2024
|-
| {{#ev:youtube|https://youtu.be/UcjJF_eyHtw?si=X2B8Osz7rZ4jCRme||left||}}
|}

 
{|
! Lane Walker flies the Laser 200 60E at Joe Nall E-Demo
|-
| {{#ev:youtube|https://youtu.be/Fmfgb2E_yFc?si=ekofcLDJGk-r0yvO||left||}}
|}

 
{|
! Aura Firmware v1.25 - 6Axis, Level Assist and Launch/Takeoff Assist Update
|-
| {{#ev:youtube|https://youtu.be/wuEYf6o9Z5k?si=eyIXiJSqrgp4x6PN||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:Laser20060E|Laser 200 60E]]
</noinclude>

RV-8 10E G2

2025-08-06T23:46:47Z

WikiSys:

{{DISPLAYTITLE:RV-8 10E G2 Wiki}}
== RV-8 10E G2 ==

=== Aura Help ===
* [[RV-8_10E_G2/TransmitterSetup|How to Setup your Transmitter for the RV-8 10E G2]]
* [[RV-8_10E_G2/Crow|How to Enable Crow with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/FlightModes|RV-8 10E G2 Flight Mode Details]]
** [[RV-8_10E_G2/QuickFlip|How to Quick Flip between the Stock and Expert Flight Modes]]
* [[RV-8_10E_G2/LaunchAssist|How to Use Takeoff/Launch Assist Mode]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/RV-8%2010%20G2%20Quick%20Assembly%20Guide%20v1.0.pdf Quick Start Guide] (English)
* [http://resources.flexinnovations.com/files/RV-8%2010E%20G2%20Super%20PNP%20Full%20Manual%20English%20v1.0.pdf Instruction Manual] (English)
* [http://resources.flexinnovations.com/files/RV8_Float_Instructions_EN_V1_0.pdf Float Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/rv-8-10e-g2-super-pnp/ RV-8 10E G2 Product Page]

=== Related YouTube Videos ===

{|
! RV-8 10E G2 Super PNP - Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/QWPy7PvzvVw?si=_qY5qdgrI1aEnnRE||left||}}
|}

 
{|
! Aura Firmware v1.25 - 6Axis, Level Assist and Launch/Takeoff Assist Update
|-
| {{#ev:youtube|https://youtu.be/wuEYf6o9Z5k?si=eyIXiJSqrgp4x6PN||left||}}
|}

 
{|
! RV-8 10E Super PNP ON FLOATS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/Sm7I0Vg3uQc?si=H5UpgpMYxeYPenW1||left||}}
|}

 
-->
{|
! Flex Innovations Super PNP Series - PNP Model with Aura Flaps Setup
|-
| {{#ev:youtube|https://www.youtube.com/watch?v=K82vO-scXAk||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2/LaunchAssist

2025-08-06T23:46:33Z

WikiSys:

{{DISPLAYTITLE:How to Use Takeoff/Launch Assist Mode}}
__FORCETOC__ 
== Takeoff/Launch Assist Mode for RV-8 10E G2 ==

Takeoff/Launch Assist Mode is a special mode that can help beginners or advanced pilots during challenging takeoff conditions. Once Takeoff/Launch Assist has been activated, it will control the roll and pitch angle of your airplane, keeping the wings level and commanding a brisk climb out to a safe altitude.

=== How to Activate Takeoff/Launch Assist Mode ===
* Hold your Transmitter sticks at the following positions for at least 3 seconds:
** Throttle low
** Rudder centered
** Full left aileron
** Full up elevator
** The airplane must be still/stationary to enter Takeoff/Launch Assist.
* When Takeoff/Launch Assist is active you will see the elevator go up to hold a climb and the ailerons move to try to keep the wings level. You can now return the Aileron and Elevator sticks to center.
** The Red LED on the Aura will also slowly flash to indicate Launch Assist is Activated.

=== How to Exit Takeoff/Launch Assist Mode ===
* Once Takeoff/Launch Assist is active, you can proceed to takeoff by advancing the throttle and using the rudder to steer.
** ''Do not accidentally move the aileron or elevator sticks from center after advancing the throttle as this will Disable Takeoff/Launch Assist!''
* Once you have advanced the Throttle and are at a comfortable altitude, you can move the Aileron or Elevator stick to disable Takeoff/ Launch Assist and resume normal control.

=== If you are having trouble activating Takeoff/Launch Assist Mode ===
* Make sure that all your trims are centered
* Keep the Airplane stationary with low Throttle and Aileron/Elevator/Rudder sticks centered for at least 5 seconds before trying again.

== Additional Information ==
* [http://resources.flexinnovations.com/files/Aura8_QuickStartOverview_v1p25.pdf Aura 8 Quick Start Overview (PDF) - English - Updated for Firmware v1.25+]
* [http://resources.flexinnovations.com/files/Aura8_AuraPro_6Axis_Update_and_QuickFlip_Guide.pdf Aura 8 and Aura Pro - 6Axis Update and Quick Flip Guide (PDF) - English] - For Firmware v1.25+

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2/LaunchAssist

2025-08-06T23:46:09Z

WikiSys: Created page with "{{DISPLAYTITLE:How to Activate Takeoff/Launch Assist Mode}} __FORCETOC__  == Takeoff/Launch Assist Mo..."

{{DISPLAYTITLE:How to Activate Takeoff/Launch Assist Mode}}
__FORCETOC__ 
== Takeoff/Launch Assist Mode for RV-8 10E G2 ==

Takeoff/Launch Assist Mode is a special mode that can help beginners or advanced pilots during challenging takeoff conditions. Once Takeoff/Launch Assist has been activated, it will control the roll and pitch angle of your airplane, keeping the wings level and commanding a brisk climb out to a safe altitude.

=== How to Activate Takeoff/Launch Assist Mode ===
* Hold your Transmitter sticks at the following positions for at least 3 seconds:
** Throttle low
** Rudder centered
** Full left aileron
** Full up elevator
** The airplane must be still/stationary to enter Takeoff/Launch Assist.
* When Takeoff/Launch Assist is active you will see the elevator go up to hold a climb and the ailerons move to try to keep the wings level. You can now return the Aileron and Elevator sticks to center.
** The Red LED on the Aura will also slowly flash to indicate Launch Assist is Activated.

=== How to Exit Takeoff/Launch Assist Mode ===
* Once Takeoff/Launch Assist is active, you can proceed to takeoff by advancing the throttle and using the rudder to steer.
** ''Do not accidentally move the aileron or elevator sticks from center after advancing the throttle as this will Disable Takeoff/Launch Assist!''
* Once you have advanced the Throttle and are at a comfortable altitude, you can move the Aileron or Elevator stick to disable Takeoff/ Launch Assist and resume normal control.

=== If you are having trouble activating Takeoff/Launch Assist Mode ===
* Make sure that all your trims are centered
* Keep the Airplane stationary with low Throttle and Aileron/Elevator/Rudder sticks centered for at least 5 seconds before trying again.

== Additional Information ==
* [http://resources.flexinnovations.com/files/Aura8_QuickStartOverview_v1p25.pdf Aura 8 Quick Start Overview (PDF) - English - Updated for Firmware v1.25+]
* [http://resources.flexinnovations.com/files/Aura8_AuraPro_6Axis_Update_and_QuickFlip_Guide.pdf Aura 8 and Aura Pro - 6Axis Update and Quick Flip Guide (PDF) - English] - For Firmware v1.25+

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2

2025-08-06T23:32:58Z

WikiSys:

{{DISPLAYTITLE:RV-8 10E G2 Wiki}}
== RV-8 10E G2 ==

=== Aura Help ===
* [[RV-8_10E_G2/TransmitterSetup|How to Setup your Transmitter for the RV-8 10E G2]]
* [[RV-8_10E_G2/Crow|How to Enable Crow with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/FlightModes|RV-8 10E G2 Flight Mode Details]]
** [[RV-8_10E_G2/QuickFlip|How to Quick Flip between the Stock and Expert Flight Modes]]
* [[RV-8_10E_G2/LaunchAssist|How to Activate Takeoff/Launch Assist Mode]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/RV-8%2010%20G2%20Quick%20Assembly%20Guide%20v1.0.pdf Quick Start Guide] (English)
* [http://resources.flexinnovations.com/files/RV-8%2010E%20G2%20Super%20PNP%20Full%20Manual%20English%20v1.0.pdf Instruction Manual] (English)
* [http://resources.flexinnovations.com/files/RV8_Float_Instructions_EN_V1_0.pdf Float Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/rv-8-10e-g2-super-pnp/ RV-8 10E G2 Product Page]

=== Related YouTube Videos ===

{|
! RV-8 10E G2 Super PNP - Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/QWPy7PvzvVw?si=_qY5qdgrI1aEnnRE||left||}}
|}

 
{|
! Aura Firmware v1.25 - 6Axis, Level Assist and Launch/Takeoff Assist Update
|-
| {{#ev:youtube|https://youtu.be/wuEYf6o9Z5k?si=eyIXiJSqrgp4x6PN||left||}}
|}

 
{|
! RV-8 10E Super PNP ON FLOATS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/Sm7I0Vg3uQc?si=H5UpgpMYxeYPenW1||left||}}
|}

 
-->
{|
! Flex Innovations Super PNP Series - PNP Model with Aura Flaps Setup
|-
| {{#ev:youtube|https://www.youtube.com/watch?v=K82vO-scXAk||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2/FlightModes

2025-08-06T23:28:38Z

WikiSys:

{{DISPLAYTITLE:RV-8 10E G2 Flight Modes}}
__FORCETOC__ 
== RV-8 10E G2 Flight Modes ==
The RV-8 10E G2 Flight Modes have been updated from the original RV-8 10E.

Use the Aura Quick Flip Procedure to Flip the Aura between the Stock Flight Modes and the Expert Flight Modes:
* [[RV-8_10E_G2/QuickFlip|How to Quick Flip between the Stock and Expert Flight Modes]]
* [http://resources.flexinnovations.com/files/Aura8_AuraPro_6Axis_Update_and_QuickFlip_Guide.pdf Aura 8 and Aura Pro - 6Axis Update and Quick Flip Guide (PDF) - English] - For Firmware v1.25+
* Aura 8 Quick Start Overview [http://resources.flexinnovations.com/files/Aura8_QuickStartOverview_v1p25.pdf (PDF) - English - Updated for Firmware v1.25+]

There is a Stock profile and an Expert Profile for the RV-8 10E G2, but the RV-8 10E G2 Quick Set feature also allows the user to change two settings:
* Enable/Disable Crow via a 2 Position Switch on Ch8/Aux3. (Crow is initially DISABLED, but can be ENABLED).
* Enabled/Disable a Gyro Gain Kill switch via a 2 Position Switch on Ch7/Aux2 (Gyro Gain Kill switch is initially Disabled, but can be ENABLED)

{| class="wikitable"
|+ RV-8 10E G2 Stock Flight Modes
| style="width: 600px; vertical-align:top" |
=== RV-8 10E G2 - Stock Flight Modes ===
The RV-8 10E G2 ships with the 'Stock Flight Modes' detailed below:

* '''Flight Mode 1: Level Assist (6 Axis - Gyro On)'''
** The is a beginner mode and ideal to learn to fly
** This is a self-leveling mode, when the sticks are released the plane will automatically return to straight and level flight
** Bank and pitch angles are limited, but very capable
** Rates are low and expos tuned for comfortable flight
** Gyro is set to low
** Live Wing OFF - Flaps operate as normal

* '''Flight Mode 2: Sport (3 Axis - Gyro On)'''
** For general flight and basic sport aerobatics
** Rates are low and expos tuned for comfortable flight
** Gyro is set to low
** Live Wing OFF - Flaps operate as normal

* ''' Flight Mode 3: Advanced (3 Axis - Gyro On)'''
** For general flight and aggressive sport aerobatics
** Rates are medium and expos are tuned for comfortable flight
** Gyro is set to low
** Live Wing ON - Flaps work in conjunction with ailerons for added roll authority
|}

{| class="wikitable"
|+ RV-8 10E G2 Expert Flight Modes
| style="width: 600px; vertical-align:top" |
=== RV-8 10E G2 - Expert Flight Modes ===
Use the Quick Flip feature to switch the RV-8 10E G2 to the 'Expert Flight Modes' detailed below:

* '''Flight Mode 1: Sport (3 Axis - Gyro On)'''
** For general flight and basic sport aerobatics
** Rates are low and expos tuned for comfortable flight
** Gyro is set to low
** Live Wing OFF - Flaps operate as normal

* '''Flight Mode 2: Advanced (3 Axis - Gyro On)'''
** For general flight and aggressive sport aerobatics
** Rates are medium and expos are tuned for comfortable flight
** Gyro is set to low
** Live Wing ON - Flaps work in conjunction with ailerons for added roll authority

* ''' Flight Mode 3: Slow Speed 3D (Gyro On)'''
** For slow speed 3D flight
** Rates are highest and expos are tuned for comfortable flight
** Gyro Gains are ON and set to their highest setting.
*** May oscillate in high speed flight under certain conditions
** Live Wing ON - Flaps work in conjunction with ailerons for added roll authority

|}

== RV-8 10E G2 Options ==
* [[RV-8_10E_G2/QuickFlip|How to Quick Flip between the Stock and Expert Flight Modes]]
* [[RV-8_10E_G2/Crow|How to use Enable Crow with QuickSet from your Transmitter]]
* [[RV-8_10E_G2/GyroGainKill|How to use Enable Gyro Gain Kill Switch with QuickSet from your Transmitter]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2/QuickFlip

2025-08-06T23:26:30Z

WikiSys: Created page with "{{DISPLAYTITLE:How to Quick Flip between the Stock and Expert Flight Modes}} __FORCETOC__  == Quick F..."

{{DISPLAYTITLE:How to Quick Flip between the Stock and Expert Flight Modes}}
__FORCETOC__ 
== Quick Flip Procedure for RV-8 10E G2 ==

'''No Transmitter, Receiver or PC is needed to complete the Quick Flip procedure.'''

=== Step 1 - Enter Quick Flip ===
# Unplug the battery from the airplane
# Turn OFF your transmitter.
# Connect the battery to power up the Airplane. The Blue LED will flash indicating Gyro Calibration.
# After it stops flashing, orient the model with a straight down nose attitude and keep it still.

=== Step 2 - Flip the Flight Modes ===
When the profile switches, the Green LED will begin to flash and the Servos will power up and center.
# The Elevator will then move 3 times to indicate the Expert Profile is being used or 6 times to indicate the Stock Profile is being used

=== Step 3 - Exit Quick Flip and Restart ===
# Once the Elevator deflections are complete, return the model to a level attitude
# Disconnect the battery
# Turn ON your transmitter and connect your battery as normal. Use your flight mode switch to check the Flight Modes act as expected and go fly!
# To switch back to the other profile, just repeat this procedure.

== Additional Information ==
* [http://resources.flexinnovations.com/files/Aura8_QuickStartOverview_v1p25.pdf Aura 8 Quick Start Overview (PDF) - English - Updated for Firmware v1.25+]
* [http://resources.flexinnovations.com/files/Aura8_AuraPro_6Axis_Update_and_QuickFlip_Guide.pdf Aura 8 and Aura Pro - 6Axis Update and Quick Flip Guide (PDF) - English] - For Firmware v1.25+
* [[RV-8_10E_G2/FlightModes|RV-8 10E G2 Flight Mode Details]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2

2025-08-06T23:24:27Z

WikiSys: /* Aura Help */

{{DISPLAYTITLE:RV-8 10E G2 Wiki}}
== RV-8 10E G2 ==

=== Aura Help ===
* [[RV-8_10E_G2/TransmitterSetup|How to Setup your Transmitter for the RV-8 10E G2]]
* [[RV-8_10E_G2/Crow|How to Enable Crow with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/FlightModes|RV-8 10E G2 Flight Mode Details]]
** [[RV-8_10E_G2/QuickFlip|How to Quick Flip between the Stock and Expert Flight Modes]]
* [[RV-8_10E_G2/LaunchAssist|How to Activate Takeoff/Launch Assist Mode]]



=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/RV-8%2010%20G2%20Quick%20Assembly%20Guide%20v1.0.pdf Quick Start Guide] (English)
* [http://resources.flexinnovations.com/files/RV-8%2010E%20G2%20Super%20PNP%20Full%20Manual%20English%20v1.0.pdf Instruction Manual] (English)
* [http://resources.flexinnovations.com/files/RV8_Float_Instructions_EN_V1_0.pdf Float Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/rv-8-10e-g2-super-pnp/ RV-8 10E G2 Product Page]

=== Related YouTube Videos ===

{|
! RV-8 10E G2 Super PNP - Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/QWPy7PvzvVw?si=_qY5qdgrI1aEnnRE||left||}}
|}

 
{|
! Aura Firmware v1.25 - 6Axis, Level Assist and Launch/Takeoff Assist Update
|-
| {{#ev:youtube|https://youtu.be/wuEYf6o9Z5k?si=eyIXiJSqrgp4x6PN||left||}}
|}

 
{|
! RV-8 10E Super PNP ON FLOATS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/Sm7I0Vg3uQc?si=H5UpgpMYxeYPenW1||left||}}
|}

 
-->
{|
! Flex Innovations Super PNP Series - PNP Model with Aura Flaps Setup
|-
| {{#ev:youtube|https://www.youtube.com/watch?v=K82vO-scXAk||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

RV-8 10E G2

2025-08-06T23:15:04Z

WikiSys:

{{DISPLAYTITLE:RV-8 10E G2 Wiki}}
== RV-8 10E G2 ==

=== Aura Help ===
* [[RV-8_10E_G2/TransmitterSetup|How to Setup your Transmitter for the RV-8 10E G2]]
* [[RV-8_10E_G2/Crow|How to Enable Crow with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/GyroGainKill|How to Enable Gyro Gain Kill Switch with Quick Set from your Transmitter]]
* [[RV-8_10E_G2/FlightModes|RV-8 10E G2 Flight Modes]]
** [[RV-8_10E_G2/QuickFlip|How to Quick Flip between the Stock and Expert Flight Modes]]
* [[RV-8_10E_G2/LaunchAssist|How to Activate Takeoff/Launch Assist Mode]]


=== Latest Manuals ===
* [http://resources.flexinnovations.com/files/RV-8%2010%20G2%20Quick%20Assembly%20Guide%20v1.0.pdf Quick Start Guide] (English)
* [http://resources.flexinnovations.com/files/RV-8%2010E%20G2%20Super%20PNP%20Full%20Manual%20English%20v1.0.pdf Instruction Manual] (English)
* [http://resources.flexinnovations.com/files/RV8_Float_Instructions_EN_V1_0.pdf Float Manual] (English)

=== Addendums ===
* [http://www.resources.flexinnovations.com/files/Flex_Warranty.pdf Warranty Information]

=== Product Information ===
* [https://www.flexinnovations.com/product/rv-8-10e-g2-super-pnp/ RV-8 10E G2 Product Page]

=== Related YouTube Videos ===

{|
! RV-8 10E G2 Super PNP - Quique Somenzini
|-
| {{#ev:youtube|https://youtu.be/QWPy7PvzvVw?si=_qY5qdgrI1aEnnRE||left||}}
|}

 
{|
! Aura Firmware v1.25 - 6Axis, Level Assist and Launch/Takeoff Assist Update
|-
| {{#ev:youtube|https://youtu.be/wuEYf6o9Z5k?si=eyIXiJSqrgp4x6PN||left||}}
|}

 
{|
! RV-8 10E Super PNP ON FLOATS - Quique Somenzini - RAW
|-
| {{#ev:youtube|https://youtu.be/Sm7I0Vg3uQc?si=H5UpgpMYxeYPenW1||left||}}
|}

 
-->
{|
! Flex Innovations Super PNP Series - PNP Model with Aura Flaps Setup
|-
| {{#ev:youtube|https://www.youtube.com/watch?v=K82vO-scXAk||left||}}
|}

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>

Template:Main page/superpnp text

2025-08-06T23:02:05Z

WikiSys:

<div id="mf-users" title="Aura AFCS">
What are Flex Innovations Super PNP Aircraft?

Our proprietary Super PNP Aircraft are delivered only needing a receiver, a battery, and a quick assembly! Each aircraft comes with the motor, ESC, servos, and Aura installed and ready for flight.
* '''[[Cessna170PNP|Cessna 170 60E Wiki]]'''
* '''[[Cessna170_60E_G2|Cessna 170 60E G2 Wiki]]'''
* '''[[Cypher|Cypher VTOL Wiki]]'''
* '''[[F-100D_90mm_EDF|F-100D 90mm EDF Wiki]]'''
* '''[[FlexJet|FlexJet Wiki]]'''
* '''[[FlexJetTV|FlexJet TV Wiki]]'''
* '''[[Mamba_10E|Mamba 10E Wiki]]'''
* '''[[Mamba_10E_G2_6S|Mamba 10E G2 (6S) Wiki]]'''
* '''[[Mamba60|Mamba 60E Wiki]]'''
* '''[[Pirana|Piraña Wiki]]'''
* '''[[QQCap232EX|QQ CAP 232EX 60E Wiki]]'''
* '''[[QQExtra300|QQ Extra 300 Wiki]]'''
* '''[[QQYak5510E|QQ Yak 55 10E Wiki]]'''
* '''[[Rv-8_10|RV-8 10E Wiki]]'''
* '''[[RV-8_10E_G2|RV-8 10E G2 Wiki]]'''
* '''[[RV8|RV-8 60E Wiki]]'''
* '''[[RV-8_60E_G2|RV-8 60E G2 Wiki]]'''
* '''[[TwinOtter_80E|Twin Otter 80E Wiki]]'''
</div>
<noinclude>{{languages|Template:Main page/superpnp text}}[[Category:Main page templates|superpnp text]]</noinclude>

MediaWiki:Sidebar

2025-08-06T23:01:35Z

WikiSys:

RV-8 10E G2/FlightModes

2025-08-06T22:59:53Z

WikiSys:

{{DISPLAYTITLE:RV-8 10E G2 Flight Modes}}
__FORCETOC__ 
== RV-8 10E G2 Flight Modes ==
The RV-8 10E G2 Flight Modes have been updated from the original RV-8 10E.

There is a Stock profile and an Expert Profile for the RV-8 10E G2, but the RV-8 10E G2 Quick Set feature also allows the user to change two settings:
* Enable/Disable Crow via a 2 Position Switch on Ch8/Aux3. (Crow is initially DISABLED, but can be ENABLED).
* Enabled/Disable a Gyro Gain Kill switch via a 2 Position Switch on Ch7/Aux2 (Gyro Gain Kill switch is initially Disabled, but can be ENABLED)

Use the Aura Quick Flip Procedure to Flip the Aura between the Stock Flight Modes and the Expert Flight Modes:
* [http://resources.flexinnovations.com/files/Aura8_AuraPro_6Axis_Update_and_QuickFlip_Guide.pdf Aura 8 and Aura Pro - 6Axis Update and Quick Flip Guide (PDF) - English] - For Firmware v1.25+
* Aura 8 Quick Start Overview [http://resources.flexinnovations.com/files/Aura8_QuickStartOverview_v1p25.pdf (PDF) - English - Updated for Firmware v1.25+]

{| class="wikitable"
|+ RV-8 10E G2 Stock Flight Modes
| style="width: 600px; vertical-align:top" |
=== RV-8 10E G2 - Stock Flight Modes ===
The RV-8 10E G2 ships with the 'Stock Flight Modes' detailed below:

* '''Flight Mode 1: Level Assist (6 Axis - Gyro On)'''
** The is a beginner mode and ideal to learn to fly
** This is a self-leveling mode, when the sticks are released the plane will automatically return to straight and level flight
** Bank and pitch angles are limited, but very capable
** Rates are low and expos tuned for comfortable flight
** Gyro is set to low
** Live Wing OFF - Flaps operate as normal

* '''Flight Mode 2: Sport (3 Axis - Gyro On)'''
** For general flight and basic sport aerobatics
** Rates are low and expos tuned for comfortable flight
** Gyro is set to low
** Live Wing OFF - Flaps operate as normal

* ''' Flight Mode 3: Advanced (3 Axis - Gyro On)'''
** For general flight and aggressive sport aerobatics
** Rates are medium and expos are tuned for comfortable flight
** Gyro is set to low
** Live Wing ON - Flaps work in conjunction with ailerons for added roll authority
|}

{| class="wikitable"
|+ RV-8 10E G2 Expert Flight Modes
| style="width: 600px; vertical-align:top" |
=== RV-8 10E G2 - Expert Flight Modes ===
Use the Quick Flip feature to switch the RV-8 10E G2 to the 'Expert Flight Modes' detailed below:

* '''Flight Mode 1: Sport (3 Axis - Gyro On)'''
** For general flight and basic sport aerobatics
** Rates are low and expos tuned for comfortable flight
** Gyro is set to low
** Live Wing OFF - Flaps operate as normal

* '''Flight Mode 2: Advanced (3 Axis - Gyro On)'''
** For general flight and aggressive sport aerobatics
** Rates are medium and expos are tuned for comfortable flight
** Gyro is set to low
** Live Wing ON - Flaps work in conjunction with ailerons for added roll authority

* ''' Flight Mode 3: Slow Speed 3D (Gyro On)'''
** For slow speed 3D flight
** Rates are highest and expos are tuned for comfortable flight
** Gyro Gains are ON and set to their highest setting.
*** May oscillate in high speed flight under certain conditions
** Live Wing ON - Flaps work in conjunction with ailerons for added roll authority

|}

== RV-8 10E G2 Options ==
* [[RV-8_10E_G2/Crow|How to use Enable Crow with QuickSet from your Transmitter]]
* [[RV-8_10E_G2/GyroGainKill|How to use Enable Gyro Gain Kill Switch with QuickSet from your Transmitter]]

<noinclude>
[[Category:SuperPNP|Super PNP]]
[[Category:RV8|RV-8]]
</noinclude>