GenericJet/AuraWizard - Revision history

WikiSys at 22:27, 30 December 2024

2024-12-30T22:27:58Z

WikiSys at 21:21, 30 December 2024

2024-12-30T21:21:42Z

WikiSys at 19:50, 26 November 2024

2024-11-26T19:50:00Z

WikiSys at 19:48, 26 November 2024

2024-11-26T19:48:43Z

WikiSys at 19:27, 9 September 2024

2024-09-09T19:27:31Z

WikiSys at 21:18, 29 August 2024

2024-08-29T21:18:33Z

WikiSys at 20:27, 28 August 2024

2024-08-28T20:27:37Z

WikiSys at 19:12, 28 August 2024

2024-08-28T19:12:07Z

WikiSys at 19:08, 28 August 2024

2024-08-28T19:08:02Z

WikiSys at 19:04, 28 August 2024

2024-08-28T19:04:30Z

@@ Line 171: / Line 171: @@
 ** <u>"''On - With Gain, With Ch11/Ch12 Trimmers''"</u>: <u>On</u> with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when activated.  Thrust Vector Pitch/Yaw trims can be adjusted with Ch11/Ch12 respectively.
 == Next Steps ==
 * Continue to [[GenericJet/TransmitterSetup|Generic Jet Transmitter Setup]].
 * Back to the [[GenericJet/Walkthrough|Generic Jet Walkthrough Guide]].

@@ Line 97: / Line 97: @@
 * TVC
-** If using a Thrust Vector system for a QQ F-16 3D Style config, '''it is Fixed in Flight Modes 1 and 2 but Steerable in Flight Mode 3'''
+** If using a Thrust Vector system for a QQ F-16 Style config, assign your '''Thrust Vector switch to Channel 9''' (by default)
 <br>
@@ Line 163: / Line 163: @@
 ** Thrust Vector Rates/Expo can be adjusted by adjusting the Ch23/Ch24 Rates/Expo in each Flight Mode.
 * The Thrust Vector is <u>On</u> when the Ch23/Ch24 cut conditions are not met.
-** For Rosier Style and Traditional Style Jets, the Thrust Vector control is <u>ON/OFF using a switch on Ch9 (by default)</u>.
+** The Thrust Vector control is <u>ON/OFF using a switch on Ch9 (by default)</u>.
-** For QQ F-16 3D Jet Style, the Thrust Vector control is <u>OFF in Flight Mode 1 and Flight Mode 2, but ON in Flight Mode 3.</u>
 * The '''Thrust Vector Switch''' Options are:
 ** <u>"''Off''"</u>: No Pitch/Yaw Thrust Vector servos setup in the Aura Config File

@@ Line 63: / Line 63: @@
 * Flaps
-** Assign your Flap Switch to Channel 6 in your Transmitter.  See [[#Flap_Options|Flap Options section]] below for more details.
+** Assign your '''Flap Switch to Channel 6 in your Transmitter'''.  See [[#Flap_Options|Flap Options section]] below for more details.
 ** Use the Flap Switch to command any Flap Position in any Flight Mode
 ** Change Flap Positions and Flap Elevator Compensation using the Aura Config Tool
@@ Line 91: / Line 91: @@
 * Flaps
-** Assign your Flap Switch to Channel 6 in your Transmitter.  See [[#Flap_Options|Flap Options section]] below for more details.
+** Assign your '''Flap Switch to Channel 6 in your Transmitter'''.  See [[#Flap_Options|Flap Options section]] below for more details.
 ** Use the Flap Switch to command any Flap Position in any Flight Mode
 ** Change Flap Positions and Flap Elevator Compensation using the Aura Config Tool

@@ Line 38: / Line 38: @@
 * TVC
-** If using a Thrust Vector system, it is Fixed unless turned on by the Thrust Vector Switch Channel 9 (by default)
+** If using a Thrust Vector system for a Rosier Style config, assign your '''Thrust Vector switch to Channel 9''' (by default)
 <br>
@@ Line 69: / Line 69: @@
 * TVC
-** If using a Thrust Vector system, it is Fixed unless turned on by the Thrust Vector Switch Channel 9 (by default)
+** If using a Thrust Vector system for a Traditional Style config, assign your '''Thrust Vector switch to Channel 9''' (by default)
 <br>
@@ Line 97: / Line 97: @@
 * TVC
-** If using a Thrust Vector system, it is Fixed in Flight Modes 1 and 2 but Steerable in Flight Mode 3
+** If using a Thrust Vector system for a QQ F-16 3D Style config, '''it is Fixed in Flight Modes 1 and 2 but Steerable in Flight Mode 3'''
 <br>

@@ Line 125: / Line 125: @@
 * Use the '''Crow Switch''' Dropdown Box in the Wizard to turn On or Off the Crow option.
 * The <u>"''On - Switch Channel''"</u> option will enable a throttle based Crow Mix to the Ailerons and Flaps when Activated with Crow Switch Channel.
-** By default, the Crow Switch will be assigned to Channel 7.
+** By default, the Crow Switch will be assigned to Channel 8.
 * The <u>"''On - Tied to Landing Mode''"</u> option will enable a crow offset to the Ailerons when the Landing Flight Mode is in use.
 ** This option is only available when the ''Rosier Style'' ''Gains/Rates/Expos'' option is selected.

@@ Line 2: / Line 2: @@
 == Generic Jet - Setup with Aura Wizard Options ==
-Use the Aura Wizard with your Jet to quickly setup the:
+Use the Aura Wizard with your Jet to quickly setup:
 * Transmitter Type
 * Receiver Connection Type
 * Rates/Expo/Flight Mode Style
-** Traditional Style: Low/Med/High Rates with Independent Flap Switch
+** '''Traditional Style: Low/Med/High Rates with Independent Flap Switch'''
-** Rosier Style: Landing, Takeoff and Cruise Flight Modes with Full Rates and Flaps Tied to Flight Mode
+** '''Rosier Style: Landing, Takeoff and Cruise Flight Modes with Full Rates and Flaps Tied to Flight Mode'''
 * Gyro Gain Kill Option
 * Crow Switch Option
@@ Line 18: / Line 19: @@
 The Aura Config Tool Wizard makes it easy to quickly create an Aura Configuration File for any Jet, but any option can be tuned or changed after creating the initial configuration.
-<br><br>
 == Generic Jet - Setup with Aura Wizard Video ==
 In Work
@@ Line 103: / Line 105: @@
 * '''Flight Mode 2: Fast 3D'''
-** Medimum Rates
+** Medium Rates
 ** Medium Gain
@@ Line 161: / Line 163: @@
 ** Thrust Vector Rates/Expo can be adjusted by adjusting the Ch23/Ch24 Rates/Expo in each Flight Mode.
 * The Thrust Vector is <u>On</u> when the Ch23/Ch24 cut conditions are not met.
-** For Rozier Style and Traditional Style Jets, the Thrust Vector control is <u>ON/OFF using a switch on Ch9 (by default)</u>.
+** For Rosier Style and Traditional Style Jets, the Thrust Vector control is <u>ON/OFF using a switch on Ch9 (by default)</u>.
 ** For QQ F-16 3D Jet Style, the Thrust Vector control is <u>OFF in Flight Mode 1 and Flight Mode 2, but ON in Flight Mode 3.</u>
 * The '''Thrust Vector Switch''' Options are:

@@ Line 129: / Line 129: @@
 === Flap Options ===
-* Use the '''Enable Aura Flap System''' option to setup Flap Positions, Elevator Compensation, Flap Speed, Live Wing, or Flap Gyro Gain Options easily in Aura
+* Use the '''Enable Aura Flap System''' option to setup Flap Positions, Elevator Compensation, Flap Speed, Live Wing, or Flap Gyro Gain Options easily in Aura.
 ** By default, '''Enable Aura Flap System''' is <u>''checked''</u>.  Assign the Flap Switch to Channel 6 in your Transmitter, but adjust Flap Settings in the Flap System Tab in the Aura Config Tool.
-** <u>Uncheck</u> the '''Enable Aura Flap System''' if you want to setup the Flaps positions in your Transmitter using Channel 6
+** <u>Uncheck</u> the '''Enable Aura Flap System''' if you want to setup the Flaps positions in your Transmitter using Channel 6.
-* <u>Check</u> the '''Enable Live Wing in Flight Mode 3''' option to configure the Flaps with Ailerons in Flight Mode 3
+* <u>Check</u> the '''Enable Live Wing in Flight Mode 3''' option to configure the Flaps with Ailerons in Flight Mode 3.
 ** Be sure your flaps can mechanically move in each direction to use this option and prevent damage to your Flaps.
-** Flaps can be configured to only move down with Aileron by adjusting one side of the Flap Live Wing Scale or by adjust the Servo Pulse Width Limit
+** Flaps can be configured to only move down with Aileron by adjusting one side of the Flap Live Wing Scale or by adjust the Servo Pulse Width Limit.
-* <u>Check</u> the '''Enable Flap Gyro Gain in Flight Mode 3''' option to configure the Flaps to respond to Roll Gain
+* <u>Check</u> the '''Enable Flap Gyro Gain in Flight Mode 3''' option to configure the Flaps to respond to Roll Gain.
 ** Be sure your flaps can mechanically move in each direction to use this option and prevent damage to your Flaps.
-** Flaps can be configured to only move down with Aileron by adjusting one side of the Servo Output Scale or by adjust the Servo Pulse Width Limit
+** Flaps can be configured to only move down with Aileron by adjusting one side of the Servo Output Scale or by adjust the Servo Pulse Width Limit.
 === Nose Wheel Options ===
 * Use the '''Steerable Nose Wheel''' Dropdown Box in the Wizard to turn <u>On</u> the Steerable Nose Wheel option.
-* If <u>On</u>, a Nose Wheel servo will be setup in the Aura Config File
+* If <u>On</u>, a Nose Wheel servo will be setup in the Aura Config File.
 ** The Rudder stick is remapped to Ch22 in Aura for Nose Wheel Steering.
 ** Nose Wheel Rates/Expo can be adjusted by adjusting the Ch22 Rates/Expo in each Flight Mode.
@@ Line 169: / Line 169: @@
 ** <u>"''On - With Gain, No Trimmer''"</u>: <u>On</u> with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when activated.
 ** <u>"''On - With Gain, With Ch11/Ch12 Trimmers''"</u>: <u>On</u> with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when activated.  Thrust Vector Pitch/Yaw trims can be adjusted with Ch11/Ch12 respectively.

@@ Line 42: / Line 42: @@
 ** Flaps Down
 ** Full Rates with lowest Expo
 * '''Flight Mode 2: Takeoff'''
 ** Mid Flaps
 ** Full Rates with medium Expo
 * '''Flight Mode 3: Cruise'''
 ** Flaps Up
 ** Full Rates with highest Expo
-<br>
+** Low Gain
 === Traditional Style: Low/Med/High Rates with Independent Flap Switch ===
 * Flight Mode Switch
@@ Line 58: / Line 61: @@
 * Flaps
-** Assign your Flaps switch to Channel 6
+** Assign your Flap Switch to Channel 6 in your Transmitter.  See Flap Options below for more details.
 ** Use the Flap Switch to command any Flap Position in any Flight Mode
 ** Change Flap Positions and Flap Elevator Compensation using the Aura Config Tool
@@ Line 86: / Line 89: @@
 * Flaps
-** Assign your Flaps switch to Channel 6
+** Assign your Flap Switch to Channel 6 in your Transmitter.  See Flap Options below for more details.
 ** Use the Flap Switch to command any Flap Position in any Flight Mode
 ** Change Flap Positions and Flap Elevator Compensation using the Aura Config Tool
@@ Line 112: / Line 115: @@
 === Gyro Gain Kill Switch ===
-* Use the ''Gyro Kill Switch'' Dropdown Box in the Wizard to turn On or Off the Gyro Gain Kill Switch option.
+* Use the '''Gyro Kill Switch''' Dropdown Box in the Wizard to turn On or Off the Gyro Gain Kill Switch option.
-* The Gyro Gain Kill Switch will turn Off any Gyro Gain corrections when Activated with Gyro Gain Kill Switch Channel.
+* The Gyro Gain Kill Switch will turn <u>Off</u> any Gyro Gain corrections when Activated with Gyro Gain Kill Switch Channel.
 ** By default, the Gyro Gain Kill Switch will be assigned to Channel 7.
 === Crow Switch ===
-* Use the ''Crow Switch'' Dropdown Box in the Wizard to turn On or Off the Crow option.
+* Use the '''Crow Switch''' Dropdown Box in the Wizard to turn On or Off the Crow option.
-* The ''On - Switch Channel'' option will enable a throttle based Crow Mix to the Ailerons and Flaps when Activated with Crow Switch Channel.
+* The <u>"''On - Switch Channel''"</u> option will enable a throttle based Crow Mix to the Ailerons and Flaps when Activated with Crow Switch Channel.
 ** By default, the Crow Switch will be assigned to Channel 7.
-* The ''On - Tied to Landing Mode'' option will enable a crow offset to the Ailerons when the Landing Flight Mode is in use.
+* The <u>"''On - Tied to Landing Mode''"</u> option will enable a crow offset to the Ailerons when the Landing Flight Mode is in use.
 ** This option is only available when the ''Rosier Style'' ''Gains/Rates/Expos'' option is selected.
 === Flap Options ===
-* Use the ''Enable Aura Flap System'' option to setup Flap Positions, Elevator Compensation, Flap Speed, Live Wing, or Flap Gyro Gain Options easily in Aura
+* Use the '''Enable Aura Flap System''' option to setup Flap Positions, Elevator Compensation, Flap Speed, Live Wing, or Flap Gyro Gain Options easily in Aura
 ** Uncheck the ''Enable Aura Flap System'' if you want to setup the Flaps positions in your Transmitter using Channel 6
-* Check the ''Enable Live Wing in Flight Mode 3'' option to configure the Flaps with Ailerons in Flight Mode 3
+* Check the '''Enable Live Wing in Flight Mode 3''' option to configure the Flaps with Ailerons in Flight Mode 3
 ** Be sure your flaps can mechanically move in each direction to use this option and prevent damage to your Flaps.
 ** Flaps can be configured to only move down with Aileron by adjusting one side of the Flap Live Wing Scale or by adjust the Servo Pulse Width Limit
-* Check the ''Enable Flap Gyro Gain in Flight Mode 3'' option to configure the Flaps to respond to Roll Gain
+* Check the '''Enable Flap Gyro Gain in Flight Mode 3''' option to configure the Flaps to respond to Roll Gain
 ** Be sure your flaps can mechanically move in each direction to use this option and prevent damage to your Flaps.
 ** Flaps can be configured to only move down with Aileron by adjusting one side of the Servo Output Scale or by adjust the Servo Pulse Width Limit
@@ Line 137: / Line 141: @@
 === Nose Wheel Options ===
-* Use the ''Steerable Nose Wheel'' Dropdown Box in the Wizard to turn ON the Steerable Nose Wheel option.
+* Use the '''Steerable Nose Wheel''' Dropdown Box in the Wizard to turn <u>On</u> the Steerable Nose Wheel option.
-* If ON, a Nose Wheel servo will be setup in the Aura Config File
+* If <u>On</u>, a Nose Wheel servo will be setup in the Aura Config File
 ** The Rudder stick is remapped to Ch22 in Aura for Nose Wheel Steering.
 ** Nose Wheel Rates/Expo can be adjusted by adjusting the Ch22 Rates/Expo in each Flight Mode.
 * Ch22 is steerable when the Ch22 cut conditions are not met.
 **  You may need to change the Cut Criteria for Ch22 on the Safety Tab to make sure the Nose Wheel only steers when the Gear is Down.
-* The Steerable Nose Wheel Options are:
+* The '''Steerable Nose Wheel''' Options are:
-** ''Off'': No Nose Wheel servo setup in the Aura Config File
+** <u>"''Off''"</u>: No Nose Wheel servo setup in the Aura Config File
-** ''On - No Gain, No Trimmer'': Steerable with the Rudder stick when the Gear is Down.
+** <u>"''On - No Gain, No Trimmer''"</u>: Steerable with the Rudder stick when the Gear is Down.
-** ''On - No Gain, With Ch15 Trimmer'': Steerable with the Rudder stick when the Gear is Down.  Nose Wheel Trim can be adjusted with Ch15.
+** <u>"''On - No Gain, With Ch15 Trimmer''"</u>: Steerable with the Rudder stick when the Gear is Down.  Nose Wheel Trim can be adjusted with Ch15.
-** ''On - With Gain, No Trimmer'': Steerable with the Rudder stick and Yaw Gyro correction when the Gear is Down.
+** <u>"''On - With Gain, No Trimmer''"</u>: Steerable with the Rudder stick and Yaw Gyro correction when the Gear is Down.
-** ''On - With Gain, With Ch15 Trimmer'': Steerable with the Rudder stick and Yaw Gyro correction when the Gear is Down.  Nose Wheel Trim can be adjusted with Ch15.
+** <u>"''On - With Gain, With Ch15 Trimmer''"</u>: Steerable with the Rudder stick and Yaw Gyro correction when the Gear is Down.  Nose Wheel Trim can be adjusted with Ch15.
 === Thrust Vector Options ===
-* Use the ''Thrust Vector Switch'' Dropdown Box in the Wizard to turn ON the Thrust Vector option.
+* Use the '''Thrust Vector Switch''' Dropdown Box in the Wizard to turn <u>On</u> the Thrust Vector option.
-* If ON, Pitch and Yaw Thrust Vector servos will be setup in the Aura Config File.
+* If <u>On</u>, Pitch and Yaw Thrust Vector servos will be setup in the Aura Config File.
 ** The Pitch/Yaw sticks are remapped to Ch23/Ch24 in Aura for Thrust Vector control.
 ** Thrust Vector Rates/Expo can be adjusted by adjusting the Ch23/Ch24 Rates/Expo in each Flight Mode.
-* The Thrust Vector is steerable when the Ch23/Ch24 cut conditions are not met.
+* The Thrust Vector is <u>On</u> when the Ch23/Ch24 cut conditions are not met.
-** For Rozier Style and Traditional Style Jets, the Thrust Vector control is ON/OFF using a switch on Ch9 (by default).
+** For Rozier Style and Traditional Style Jets, the Thrust Vector control is <u>ON/OFF using a switch on Ch9 (by default)</u>.
-** For QQ F-16 3D Jet Style, the Thrust Vector control is OFF in Flight Mode 1 and Flight Mode 2, but ON in Flight Mode 3.
+** For QQ F-16 3D Jet Style, the Thrust Vector control is <u>OFF in Flight Mode 1 and Flight Mode 2, but ON in Flight Mode 3.</u>
-* The Thrust Vector Switch Options are:
+* The '''Thrust Vector Switch''' Options are:
-** ''Off'': No Nose Wheel servo setup in the Aura Config File
+** <u>"''Off''"</u>: No Pitch/Yaw Thrust Vector servos setup in the Aura Config File
-** ''On - No Gain, No Trimmer'': Steerable with the Pitch/Yaw sticks channel when ON.
+** <u>"''On - No Gain, No Trimmer''"</u>: <u>On</u> with the Pitch/Yaw sticks activated.
-** ''On - No Gain, With Ch11/Ch12 Trimmers'': Steerable with the Pitch/Yaw sticks when ON.  Thrust Vector Pitch/Yaw trims can be adjusted with Ch11/Ch12 respectively.
+** <u>"''On - No Gain, With Ch11/Ch12 Trimmers''"</u>: <u>On</u> with the Pitch/Yaw sticks when activated.  Thrust Vector Pitch/Yaw trims can be adjusted with Ch11/Ch12 respectively.
-** ''On - With Gain, No Trimmer'': Steerable with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when  ON.
+** <u>"''On - With Gain, No Trimmer''"</u>: <u>On</u> with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when activated.
-** ''On - With Gain, With Ch11/Ch12 Trimmers'': Steerable with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when ON.  Thrust Vector Pitch/Yaw trims can be adjusted with Ch11/Ch12 respectively.
+** <u>"''On - With Gain, With Ch11/Ch12 Trimmers''"</u>: <u>On</u> with the Pitch/Yaw sticks and Pitch/Yaw Gyro correction when activated.  Thrust Vector Pitch/Yaw trims can be adjusted with Ch11/Ch12 respectively.