WikiSys: Created page with "{{DISPLAYTITLE:Aura Config Tool Release Notes}} == Aura Config Tool Release Notes == === Latest Release === ==== Aura Config Tool v1.1.23.2 ==== * Minor update on available..."

2025-07-25T20:16:02Z

Created page with "{{DISPLAYTITLE:Aura Config Tool Release Notes}} == Aura Config Tool Release Notes == === Latest Release === ==== Aura Config Tool v1.1.23.2 ==== * Minor update on available..."

New page

{{DISPLAYTITLE:Aura Config Tool Release Notes}}
== Aura Config Tool Release Notes ==

=== Latest Release ===

==== Aura Config Tool v1.1.23.2 ====
* Minor update on available on March 11, 2025
* Added Extra 300 60E configuration to the Aura Config Tool Wizard

=== Previous Releases ===

==== Aura Config Tool v1.1.23.1 ====
* Update on available on December 30, 2024
* Add '''Generic Jet Wizard''' to Open Stock Aura Wizard - Airframe Type option
** Easily create an Aura Config File for any Jet configuration
** Includes 3 types of Gain/Rates/Expo Setups: Traditional Rates, Rosier Style, or QQ F-16 Style
** Easily add common Jet options like Nose Wheel Steering, Thrust Vector Control, Live Wing Flaps, Crow, and a Gyro Gain Kill Switch
** Detailed information on the Wizard options available on the [[GenericJet/AuraWizard|Generic Jet Wiki Page]]
* Add '''Generic STOL Live Wing Wizard''' to Open Stock Aura Wizard - Airframe Type option
** Easily create an Aura Config File for any STOL Live Wing setup
** This replaces the outdated ''Generic Live Wing'' option with the latest options and easier setup
** Can select any generic Wing Type or Tail Type
** Easily add common STOL options like Live Wing Flaps, Flap Gain, Crow, and a Gyro Gain Kill Switch
** Detailed information on the Wizard options available on the [[GenericSTOL/AuraWizard|Generic STOL Live Wing Wiki Page]]


==== Aura Config Tool v1.1.23.0 ====
* Update on available on October 11, 2024
* Add 'Pop-Out Mode' message box View Option for easier use on a tablet or touchscreen
** After turning on, most options will pop-out to a separate window with easier controls for tablets or touchscreens
* Added Laser 200 60E configuration to the Aura Config Tool Wizard
* Add ability to change the External Sensor Orientation
* Add Channel Cut Setup box to Safety Tab
** Allows to setup Throttle Cut or alternate custom Cut Logic for channels directly in Aura
** Useful for Nose Wheel Steering and Thrust Vector systems

==== Aura Config Tool v1.1.22.1 ====
* Update on available on August 16, 2024
* Added CAP-232EX 70cc Airframe Type for Open Stock Auras in the Aura Config Tool Wizard

==== Aura Config Tool v1.1.22.0 ====
* Update on available on April 8, 2024
* Support for Aura Firmware v1.22
* Added Ventique 60E G2 Pro configuration to the Aura Config Tool Wizard
* Added Aura 5 Flex FP Aura and FP Edge 540 and FP Ultimate configurations to the Aura Config Tool Wizard
* Add Differential Thrust Gain option to FT Aura Wizard
* Fix TX Config bug in some Wizard file creations

==== Aura Config Tool v1.1.21.0 ====
* Update on available on August 4, 2023
* Support for Aura Firmware v1.21
* Added Twin Otter 80E configuration to the Aura Config Tool Wizard
* Improved setup for FrSky and Futaba in Wizard and Setup Tab
** Improved SBUS Ch Order options for FrSky and Futaba
** Improved center offset for digital FrSky SBUS setups

==== Aura Config Tool v1.1.20.0 ====
* Beta tested in July 2023 but unreleased due to product timing
* Support for Aura Firmware v1.20
* Added RV-8 60E G2 configuration to the Aura Config Tool Wizard
* Updated Learn Transmitter functionality
** Added Manual Transmitter Setup that can be configured without needing the Transmitter/Receiver active.
* Improve Arm/Disarm logic when modifying Transmitter
** Moved 'Re-Arm' throttle button to top right corner if Aura disarms the throttle for safety during configuration.
* Add "Wing and Tail Type Wizard" button on Setup tab
** Can now view and modify the Servo Port configuration on a single view.
* Added Aileron Differential feature for Aura Firmware v1.20+.
** Must slide "Aileron Differential Enabled" to ON on the Setup tab
** Aileron Differential can be configured individually for Left and Right stick movements
** Differential can scaled proportionally during flight to tune in real time if desired
* Add "Third Control Mode" option for Aura Firmware v1.20+.

==== Aura Config Tool v1.1.19.2 ====
* Update on available on Feb 20, 2023
* Added Edge 540 120cc configuration to Aura Config Tool Wizard for Open Stock Auras

==== Aura Config Tool v1.1.19.1 ====
* Update on available on Dec 8, 2022
* Added Ultimate 70cc configuration to Aura Config Tool Wizard for Open Stock Auras

==== Aura Config Tool v1.1.19.0 ====
* Update on available on June 7, 2022
* Supports for Aura Firmware v1.19
* Added QQ Yak55 10e configuration to Aura Config Tool Wizard
* Added CAP 232EX+ 2022 updated configurations to Aura Config Tool Wizard
* Added Throttle Input Direction slide switch on Setup tab

==== Aura Config Tool v1.1.17.3 ====
* Update on available on Feb 18, 2022
* FIX: Corrected RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard
** Corrected Ailerons and Flap Servo Direction values
* Added Cessna 170 G2 configuration to Aura Config Tool Wizard
* Added option to enable the Aura Flap system in the Aura Config Tool Wizard
** Available for Aura Open Stock 'Custom' Airframe types with Flap Wing Types

==== Aura Config Tool v1.1.17.2 ====
* Minor Change available on Jan 19, 2022
* Added RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard

==== Aura Config Tool v1.1.17.1 ====
* Minor Change available on Dec 23, 2021
* Enable Aura Flap System for RV8-10 and Open Stock when using latest firmware v1.17

==== Aura Config Tool v1.1.17.0 ====
* Minor Change available on October 5, 2021
* Supports for Aura Firmware v1.17
* New Config File Wizard updated to support RV8-10

==== Aura Config Tool v1.1.16.0 ====
* Minor Change available on May 20, 2021
* Supports for Aura Firmware v1.16
* New Config File Wizard updated to support FlexJet G2

==== Aura Config Tool v1.1.15.0 ====
* Minor Change available on January 2, 2021
* Supports for Aura Firmware v1.15
* New Config File Wizard updated to support Pirana and Mamba 10 G2 6S

==== Aura Config Tool v1.1.14.2 ====
* Minor Change available on September 10, 2020 for Mamba 120cc
* New Config File Wizard updated to include "Mamba 120cc"
** Select "Mamba 120cc" for the "Airframe Type" of an Open Stock Aura to create the Aura Config File for the Mamba 120cc

==== Aura Config Tool v1.1.14.1 ====
* Minor Bug Fix Added on August 17, 2020:
** Only Allow the Aura Config Tool to set the Receiver to SRXL2 or JR Mode A for firmware v1.14+

==== Aura Config Tool v1.1.14.0 ====
* Release available soon via 'Update Aura Config Tool' in Aura Config Tool in August 11, 2020
* Supports for Aura Firmware v1.14
* Add SRXL2 Capability for Spektrum SPM4650 and SPM4651T SRXL2 receivers
* Add JR Mode A Capability
* Required for use with F-100D Super PNP

==== Aura Config Tool v1.1.13.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool in February 2020
* Supports for Aura Firmware v1.13
* Support new FT Aura 5 product
** Supports new FT Aura features such as Launch Assist, Bank Assist and Level Assist
* Differentiate between Futaba's SBUS channel order and FrSky's Default SBUS channel order
* Add Support for "Stick Relative" Stick Priority that is independent of each Flight Mode's Dual Rate/Expo Settings

==== Aura Config Tool v1.1.12.1 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool in October 2019
* Supports for Aura Firmware v1.11
* Prevent Servo Port S11 or S12 being set as 'PWM Capture' which is not supported by any firmware

==== Aura Config Tool v1.1.11.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool in August 2019
* Supports for Aura Firmware v1.11
* Required for use with the Aura Professional series
** Supports new Aura Professional options such as SBUS Diversity, SBUS Output, External Sensor support, and Battery Voltage Monitoring
* Add Jeti EX-Bus Capability
* Allows conversion of Aura Config Files between various products
** For example can convert and Aura 8 QQ Extra 300 configuration to an Aura 12 Professional Open Stock configuration.
* Small Bug Fixes

==== Aura Config Tool v1.1.10.1 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on May 2019
* Small bug fix for Ventique Wizard file creation

==== Aura Config Tool v1.1.10.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on April 2019
* Supports for Aura Firmware v1.10
* Required for use with the Mamba 60E.

==== Aura Config Tool v1.1.9.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on March 2019
* Supports for Aura Firmware v1.9
* Required for use with the FlexJet TV.

==== Aura Config Tool v1.1.8.2 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2019
* Supports for Aura Firmware v1.8
* Added the CAP-232EX+ Servo Update Helper

==== Aura Config Tool v1.1.8.1 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on January 2019
* Add Support for Aura Firmware v1.8
* Required for use with the RV8.

==== Aura Config Tool v1.1.8.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on Nov 2018
* Supports for Aura Firmware v1.6
* Required for use with the QQ Extra 300 G2.

==== Aura Config Tool v1.1.5.0 ====
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2018
* Supports for Aura Firmware v1.5
* Required for use with the CAP-232EX and Flex Jet

==== Aura Config Tool v1.1.4.2 ====
* Small Bug Fix Release available via 'Update Aura Config Tool' in Aura Config Tool on March 28, 2017
* Supports for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
* Small Software Changes:
** Update QQ Yak 54 35cc Receiver Type:PWM graphics and labels in New Aura Config File Wizard
** Fix to always show Primary Control Mode when viewing the Control Mode tab with Live Data on.

==== Aura Config Tool v1.1.4.1 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool on March 21, 2017
* Supports for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
* Main Software Changes:
** Add "Aircraft Template" for the new QQ Yak 54 35cc in the New Config File Wizard to easily create the tuned Config File
** Updated default save location to My Documents or the previously saved location.

==== Aura Config Tool v1.1.4.0 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool on February 22, 2017
* Support for Aura Firmware v1.4
* Required for use with the Mamba 10 Aura in Spring 2017
* Main Software Changes:
** Add feature to turn Aura Mixes On/Off via a Transmitter 2 or 3 Position Channel Switch.
** Add feature to create a 'Gyro Kill Switch' via a Transmitter Channel from the Wizard.
** Add Generic Live Wing to 'New Config File Wizard' for Open Stock Aura.

==== Aura Config Tool v1.1.3.0 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool in late August 2016
* Support for Aura Firmware v1.3
* Required for use with the Cessna 170
* Main Software Changes:
** Add Live Save functionality for Subtrims and Output Scaling
** Improve Live Data functionality

==== Aura Config Tool v1.1.1.0 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool in mid November 2015
* Support for Aura Firmware v1.2
* Initially released for the Aura 8 Open Stock in November 2015
* Main Software Changes:
** Add support for Open Stock Aura
** Add Quick Set and Quick Trim features
** Add for Dual Control Modes per Flight Mode
** Add support for +/- Output Scales
** Add support for SubTrim in uSec steps
** Introduce Config File Version v1.1

==== Aura Config Tool v1.0.2 ====
* Available via 'Update Aura Config Tool' in Aura Config Tool in mid August 2015
* Support for Aura Firmware v1.1
* Forced any Aura to update from Aura Firmware v1.0 to v1.1

==== Aura Config Tool v1.0.1 ====
* Initially released for the QQ Extra 300 Aura 8 in early August 2015
* Support for Aura Firmware v1.0
* No longer authorized by Flex Innovations for use. Flex Innovations can only support v1.1+.

== How to Check the Aura Config Tool Version ==
To find the version of the Aura Config Tool, click the Help '''Menu --> Aura Config Tool Info'''. The version shown below is not the latest available version, it is only shown as an example.
[[File:ACT CheckVersionInfo.gif|none|none|How to Check the Version Info of the Aura Config Tool]]<br>

Old/Aura/AuraConfigToolReleaseNotes - Revision history

WikiSys: Created page with "{{DISPLAYTITLE:Aura Config Tool Release Notes}} == Aura Config Tool Release Notes == === Latest Release === ==== Aura Config Tool v1.1.23.2 ==== * Minor update on available..."