Difference between revisions of "CAP-232EX 70cc/AuraWizard"
From Flex Innovations Wiki
(Created page with "{{DISPLAYTITLE:CAP-232EX 70cc - Aura Wizard Details and Options}} == CAP-232EX 70cc - Setup with Aura Wizard Options == Use the Aura Wizard with your CAP-232EX 70cc to quickl...") |
(No difference)
|
Revision as of 20:53, 24 September 2024
Contents
CAP-232EX 70cc - Setup with Aura Wizard Options
Use the Aura Wizard with your CAP-232EX 70cc to quickly setup:
- Transmitter Type
- Receiver Connection Type
- Rates/Expo/Flight Mode Style
- CAP-232EX 70cc Stock: Sport, Fast 3D, Slow 3D
- Gyro Gain Kill Option
For best results, create a new Transmitter model and setup the Wing/Tail type as: Normal Wing Type - 1 Aileron and Normal Tail Type - 1 Elevator, 1 Rudder.
The Aura Config Tool Wizard makes it easy to quickly create an Aura Configuration File, but any option can be tuned or changed after creating the initial configuration.
CAP-232EX 70cc - Setup with Aura Wizard Video
In Work
CAP-232EX 70cc - Rates/Expos/Flight Modes Details
CAP-232EX 70cc Stock: Sport, Fast 3D, and Slow 3D Flight Mode
- Flight Mode Switch
- Assign your Flight Mode switch to Channel 5
- Gyro Gain Kill Switch
- Assign your Gyro Gain Kill Switch to Channel 7 in your Transmitter. See Gyro Gain Kill Switch Options section below for more details.
- Use the Gyro Gain Kill Switch to immediately turn off any Gyro Gain when the switch is activated
- Since all 3 Flight Modes have Gyro Gain Active by default, this is a safety feature in case the Aura becomes unmounted in the airframe
- It is OK to Reverse the Channel 7 switch direction in your Transmitter for personal preference
- Flight Mode 1: Sport
- Low Rates
- Low Gain
- Flight Mode 2: Fast 3D
- Medium Rates
- Medium Gain
- Flight Mode 3: Slow 3D
- Full Rates
- Highest Gain
CAP-232EX 70cc - Wizard Options
Gyro Gain Kill Switch
- Use the Gyro Kill Switch Dropdown Box in the Wizard to turn On or Off the Gyro Gain Kill Switch option.
- The Gyro Gain Kill Switch will turn Off any Gyro Gain corrections when Activated with Gyro Gain Kill Switch Channel.
- By default, the Gyro Gain Kill Switch will be assigned to Channel 7.
Next Steps
- Continue to CAP-232EX 70cc Transmitter Setup.
- Back to the CAP-232EX 70cc Walkthrough Guide.