Mamba/ElectricConversion
From Flex Innovations Wiki
Revision as of 14:33, 19 April 2016 by FlexTeam (Talk | contribs) (Created page with "--Under Construction-- This page contains tips on converting the Mamba to Electric. The Mamba was designed with electric conversion in mind. The aircraft has designed in a fo...")
--Under Construction-- This page contains tips on converting the Mamba to Electric.
The Mamba was designed with electric conversion in mind. The aircraft has designed in a forward hatch that makes access to batteries and connectors easy. The 'fuel tank tray' is located to work as a basis for a battery mount.
The primary conversion is STRENGTHENING the 'fuel tank tray' to work as a 'battery tray'.
Power System (as demonstrated by Flex innovations) E-Flite 360 - 180kv Motor(EFLM4360A) http://www.horizonhobby.com/power-360-brushless-outrunner-motor--180kv-eflm4360a
70mm total motor standoffs
Castle 160HV ESC
Mejzlik 25 x 12 Prop
The chosen motor uses the same bolt pattern (and firewall hole locations as a DA Gas Engine making mounting easy.
