Aura - Quick Check

Aura - Quick Check Overview

Aura's Quick Check mode is an easy way to confirm your Aura Servo Directions are set correctly.

• Before starting Quick Check, make sure the Propeller is removed or safe!

The most important check with any Gyro is to make sure the control surfaces move in the correct direction when responding to a Gyro Correction.

There are only 2 ways to affect the direction a Servo will travel when responding to Gyro Corrections:

• Sensor Orientation
• Servo Direction in the Servo Tab

The second most important check is to make sure the control surfaces move in the correct direction when responding to Transmitter Stick Inputs.

There are multiple ways to affect the direction a Servo will travel when responding to Transmitter Stick Input:

• Input Direction in the Transmitter
• Input Polarity Mapping in Aura in the Setup Tab
• Mixes in Transmitter or Aura
• Servo Port Output Mix Scale in the Servo Tab
• Servo Direction in the Servo Tab

Quick Check - How to Video

In Work

Quick Check - Walkthrough

How To: Start Quick Check

• Use the Aura Config Tool to Start Quick Check
  • Follow these directions to [Aura/AuraConfigToolInstall|Install the Aura Config Tool on Windows] if you haven't installed it already
  • Click Connect, Tools -> Quick Check, Start Quick Set
  • The Aura will enter the Quick Check mode and flash the Green LED.

How To: Check Gyro Corrections and Fix If Necessary

• Confirm the servos move in the correct direction for any Aura Corrections.\n\n";
  • Tilt the Airplane in each axis and the Servos will deflect in an attempt to bring the airframe back to level.

How To: Check Transmitter Stick Directions and Fix if Necessary

• Use the Gyro Kill Switch Dropdown Box in the Wizard to turn On or Off the Gyro Gain Kill Switch option.
• The Gyro Gain Kill Switch will turn Off any Gyro Gain corrections when Activated with Gyro Gain Kill Switch Channel.
  • By default, the Gyro Gain Kill Switch will be assigned to Channel 7.

Exit and Restart Aura

• Use the Crow Switch Dropdown Box in the Wizard to turn On or Off the Crow option.
• The "On - Switch Channel" option will enable a throttle based Crow Mix to the Ailerons and Flaps when Activated with Crow Switch Channel.
  • If you enable the Crow Option, assign your Crow Switch to Channel 8 in your Transmitter.

Next Steps

• Continue to Aura Output Tuning Guide.
• Back to the Aura Walkthrough Guide.