Difference between revisions of "/Aura/FutabaUse/FutabaCrowAirbrakeMix"
Line 35: | Line 35: | ||
[[File:AuraConfigTool MixTab.JPG|frameless|left]] | [[File:AuraConfigTool MixTab.JPG|frameless|left]] | ||
<br clear=all> | <br clear=all> | ||
+ | |||
+ | == Adjusting The Mix == | ||
+ | |||
+ | 1) To start the adjustment, return the current '''"Mix Rate Negative" to 0'''. | ||
+ | |||
+ | [[File:AuraConfigTool MixRateNegative.JPG|frameless|left]] | ||
+ | |||
+ | 2) Adjust the '''"Mix Rate Positive" to -100''' | ||
+ | |||
+ | [[File:AuraConfigTool MixRatePositive.JPG|frameless|left]] | ||
<noinclude> | <noinclude> |
Revision as of 20:02, 29 December 2020
Main Issue
Typically, is preferred to connect your throttle servo lead, or ESC lead to your receiver when using Futaba S.Bus along with an Aura AFCS product. However, in doing so, you may find that your throttle to crow (or airbrakes) mix may work improperly on several of our products. Follow the steps below to reverse this mix.
Contents
Download the Aura Config Tool
If you haven't already, be sure to download the Aura Config Tool for Windows-based PC's. You'll need this tool to adjust the mix. You can find the download page for the Aura Config Tool HERE
Connect to, and Read from your Aura
1) Open the Aura Config Tool. Once open, connect your Aura product to your computer using the provided USB to micro-USB cable. Your computer will typically emit a tone when it is connected.
2) In the bottom right-hand corner of the screen, click "Connect".
3) A pop-up window should show that the Aura was successfully connected. Click OK.
4) In the bottom right-hand corner of the screen, you should now see a "Read From Aura" option. Click "Read From Aura". This will pull the file on the Aura up on the screen so that it can be altered.
5) A pop-up window should show that the Aura was successfully completed. Click OK.
1) Near the top left-hand side of the screen, you should see a tab labeled "Mixes". Click this tab to open the mixes screen.
2) Once on the Mixes Tab, use the drop-down menu, or up and down arrows to find the mix. The mix will have throttle as the master, and a "ghost" channel, like Channel 21 for example, as the slave.
Adjusting The Mix
1) To start the adjustment, return the current "Mix Rate Negative" to 0.
2) Adjust the "Mix Rate Positive" to -100