Difference between revisions of "/Aura/FutabaUse/FutabaCrowAirbrakeMix"

From Flex Innovations Wiki
Jump to: navigation, search
Line 3: Line 3:
  
 
==1. Download the Aura Config Tool==
 
==1. Download the Aura Config Tool==
##If you haven't already, be sure to download the Aura Config Tool for Windows-based PC's. You'll need this tool to adjust the mix. You can find the download page for the Aura Config Tool here:
+
#If you haven't already, be sure to download the Aura Config Tool for Windows-based PC's. You'll need this tool to adjust the mix. You can find the download page for the Aura Config Tool here:
##[https://www.flexinnovations.com/aura-config-tool-install/ '''Download the Aura Config Tool here''']
+
#[https://www.flexinnovations.com/aura-config-tool-install/ '''Download the Aura Config Tool here''']
  
 
==2. Connect to, and Read from your Aura==
 
==2. Connect to, and Read from your Aura==

Revision as of 18:45, 29 December 2020

Typically, is preferred to connect your throttle servo lead, or ESC lead to your receiver when using Futaba S.Bus along with an Aura AFCS product. However, in doing so, you may find that your throttle to crow (or airbrakes) mix may work improperly on several of our products. Follow the steps below to reverse this mix.

1. Download the Aura Config Tool

  1. If you haven't already, be sure to download the Aura Config Tool for Windows-based PC's. You'll need this tool to adjust the mix. You can find the download page for the Aura Config Tool here:
  2. Download the Aura Config Tool here

2. Connect to, and Read from your Aura

  1. Open the Aura Config Tool. Once open, connect your Aura product to your computer using the provided USB to micro-USB cable. Your computer will typically emit a tone when it is connected.
  2. In the bottom right-hand corner of the screen, click "Connect".