Difference between revisions of "/Aura/FutabaUse/FutabaCrowAirbrakeMix"

From Flex Innovations Wiki
Jump to: navigation, search
Line 26: Line 26:
 
[[File:AuraConfigTool ReadComplete.JPG|frameless|left]]
 
[[File:AuraConfigTool ReadComplete.JPG|frameless|left]]
 
<br clear=all>
 
<br clear=all>
 +
 +
== Navigate To the Mix ==
 +
1) Near the top left-hand side of the screen, you should see a tab labeled "Mixes". Click this tab to open the mixes screen.
 +
[[File:AuraConfigTool Mixes.JPG|frameless|left]]
 +
<br clear=all>
 +
 +
2) Once on the Mixes Tab, use the drop-down menu, or up and down arrows to find the mix. The mix will have throttle as the master, and a 'ghost' channel, like Channel 21 for example, as the slave.
 +
 
<noinclude>
 
<noinclude>
 
[[Category:Aura|Aura]]
 
[[Category:Aura|Aura]]
 
[[Category:Pirana|Pirana]]
 
[[Category:Pirana|Pirana]]
 
</noinclude>
 
</noinclude>
 
 
== Navigate To the Mixes Tab ==
 
1)
 

Revision as of 19:54, 29 December 2020


Main Issue Typically, is preferred to connect your throttle servo lead, or ESC lead to your receiver when using Futaba S.Bus along with an Aura AFCS product. However, in doing so, you may find that your throttle to crow (or airbrakes) mix may work improperly on several of our products. Follow the steps below to reverse this mix.

Download the Aura Config Tool

If you haven't already, be sure to download the Aura Config Tool for Windows-based PC's. You'll need this tool to adjust the mix. You can find the download page for the Aura Config Tool HERE

Connect to, and Read from your Aura

1) Open the Aura Config Tool. Once open, connect your Aura product to your computer using the provided USB to micro-USB cable. Your computer will typically emit a tone when it is connected.

2) In the bottom right-hand corner of the screen, click "Connect".

AuraConfigTool Connect.JPG


3) A pop-up window should show that the Aura was successfully connected. Click OK.

AuraConfigTool SuccessfullyConnected.JPG


4) In the bottom right-hand corner of the screen, you should now see a "Read From Aura" option. Click "Read From Aura". This will pull the file on the Aura up on the screen so that it can be altered.

AuraConfigTool Read.JPG


5) A pop-up window should show that the Aura was successfully completed. Click OK.

AuraConfigTool ReadComplete.JPG


Navigate To the Mix

1) Near the top left-hand side of the screen, you should see a tab labeled "Mixes". Click this tab to open the mixes screen.

AuraConfigTool Mixes.JPG


2) Once on the Mixes Tab, use the drop-down menu, or up and down arrows to find the mix. The mix will have throttle as the master, and a 'ghost' channel, like Channel 21 for example, as the slave.