Crow & Airbrake Mix Reversing for Futaba Users

From Flex Innovations Wiki
Revision as of 18:53, 29 December 2020 by WikiSys (Talk | contribs)

Jump to: navigation, search


Latest Updates

Printed Manual Errors

None found at this time.

Latest Online Manual

The Latest Version of the Piraña Super PNP Manual is available online.

  • This version matches the printed manual.

Addendums

The Piraña Super PNP Servo Connection Notice is available online.

The ZTW ESC Addendum is available online.

Build Tips

Futaba Users & Airbrakes

If you are using a Futaba receiver with the throttle in the receiver, the throttle to airbrake mix will work incorrectly. Follow the steps on the following page to reverse this mix.

  • Instructions for reversing the Piraña airbrake mix for Futaba users


Warning: Display title "Crow & Airbrake Mix Reversing for Futaba Users" overrides earlier display title "Piraña Super PNP Latest Updates, Build Tips and Addendums".

Issue

Typically, is preferred to connect your throttle servo lead, or ESC lead to your receiver when using Futaba S.Bus along with an Aura AFCS product. However, in doing so, you may find that your throttle to crow (or airbrakes) mix may work improperly on several of our products. Follow the steps below to reverse this mix.

1. Download the Aura Config Tool

  1. If you haven't already, be sure to download the Aura Config Tool for Windows-based PC's. You'll need this tool to adjust the mix. You can find the download page for the Aura Config Tool here:
  2. Download the Aura Config Tool here

2. Connect to, and Read from your Aura

  1. Open the Aura Config Tool. Once open, connect your Aura product to your computer using the provided USB to micro-USB cable. Your computer will typically emit a tone when it is connected.
  2. In the bottom right-hand corner of the screen, click "Connect".