Difference between revisions of "Aura/AuraConfigToolReleaseNotes"

From Flex Innovations Wiki
Jump to: navigation, search
m
m
 
(19 intermediate revisions by the same user not shown)
Line 3: Line 3:
  
 
=== Latest Release ===
 
=== Latest Release ===
 +
 +
==== Aura Config Tool v1.1.21.0 ====
 +
* Update on available on August 4, 2023
 +
* Support for Aura Firmware v1.21
 +
* Added Twin Otter 80E configuration to the Aura Config Tool Wizard
 +
* Improved setup for FrSky and Futaba in Wizard and Setup Tab
 +
** Improved SBUS Ch Order options for FrSky and Futaba
 +
** Improved center offset for digital FrSky SBUS setups
 +
 +
 +
=== Previous Releases ===
 +
 +
==== Aura Config Tool v1.1.20.0 ====
 +
* Beta tested in July 2023 but unreleased due to product timing
 +
* Support for Aura Firmware v1.20
 +
* Added RV-8 60E G2 configuration to the Aura Config Tool Wizard
 +
* Updated Learn Transmitter functionality
 +
** Added Manual Transmitter Setup that can be configured without needing the Transmitter/Receiver active.
 +
* Improve Arm/Disarm logic when modifying Transmitter
 +
** Moved 'Re-Arm' throttle button to top right corner if Aura disarms the throttle for safety during configuration.
 +
* Add "Wing and Tail Type Wizard" button on Setup tab
 +
** Can now view and modify the Servo Port configuration on a single view.
 +
* Added Aileron Differential feature for Aura Firmware v1.20+.
 +
** Must slide "Aileron Differential Enabled" to ON on the Setup tab
 +
** Aileron Differential can be configured individually for Left and Right stick movements
 +
** Differential can scaled proportionally during flight to tune in real time if desired
 +
* Add "Third Control Mode" option for Aura Firmware v1.20+.
 +
 +
 +
==== Aura Config Tool v1.1.19.2 ====
 +
* Update on available on Feb 20, 2023
 +
* Added Edge 540 120cc configuration to Aura Config Tool Wizard for Open Stock Auras
 +
 +
 +
==== Aura Config Tool v1.1.19.1 ====
 +
* Update on available on Dec 8, 2022
 +
* Added Ultimate 70cc configuration to Aura Config Tool Wizard for Open Stock Auras
 +
 +
 +
==== Aura Config Tool v1.1.19.0 ====
 +
* Update on available on June 7, 2022
 +
* Supports for Aura Firmware v1.19
 +
* Added QQ Yak55 10e configuration to Aura Config Tool Wizard
 +
* Added CAP 232EX+ 2022 updated configurations to Aura Config Tool Wizard
 +
* Added Throttle Input Direction slide switch on Setup tab
 +
 +
 +
==== Aura Config Tool v1.1.17.3 ====
 +
* Update on available on Feb 18, 2022
 +
* FIX: Corrected RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard
 +
** Corrected Ailerons and Flap Servo Direction values
 +
* Added Cessna 170 G2 configuration to Aura Config Tool Wizard
 +
* Added option to enable the Aura Flap system in the Aura Config Tool Wizard
 +
** Available for Aura Open Stock 'Custom' Airframe types with Flap Wing Types
 +
 +
 +
==== Aura Config Tool v1.1.17.2 ====
 +
* Minor Change available on Jan 19, 2022
 +
* Added RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard
 +
 +
 +
==== Aura Config Tool v1.1.17.1 ====
 +
* Minor Change available on Dec 23, 2021
 +
* Enable Aura Flap System for RV8-10 and Open Stock when using latest firmware v1.17
 +
 +
 +
==== Aura Config Tool v1.1.17.0 ====
 +
* Minor Change available on October 5, 2021
 +
* Supports for Aura Firmware v1.17
 +
* New Config File Wizard updated to support RV8-10
 +
 +
 +
==== Aura Config Tool v1.1.16.0 ====
 +
* Minor Change available on May 20, 2021
 +
* Supports for Aura Firmware v1.16
 +
* New Config File Wizard updated to support FlexJet G2
 +
 +
 +
==== Aura Config Tool v1.1.15.0 ====
 +
* Minor Change available on January 2, 2021
 +
* Supports for Aura Firmware v1.15
 +
* New Config File Wizard updated to support Pirana and Mamba 10 G2 6S
 +
 +
 +
==== Aura Config Tool v1.1.14.2 ====
 +
* Minor Change available on September 10, 2020 for Mamba 120cc
 +
* New Config File Wizard updated to include "Mamba 120cc"
 +
**  Select "Mamba 120cc" for the "Airframe Type" of an Open Stock Aura to create the Aura Config File for the Mamba 120cc
 +
 +
 +
==== Aura Config Tool v1.1.14.1 ====
 +
* Minor Bug Fix Added on August 17, 2020:
 +
** Only Allow the Aura Config Tool to set the Receiver to SRXL2 or JR Mode A for firmware v1.14+
 +
 +
 +
==== Aura Config Tool v1.1.14.0 ====
 +
* Release available soon via 'Update Aura Config Tool' in Aura Config Tool in August 11, 2020
 +
* Supports for Aura Firmware v1.14
 +
* Add SRXL2 Capability for Spektrum SPM4650 and SPM4651T SRXL2 receivers
 +
* Add JR Mode A Capability
 +
* Required for use with F-100D Super PNP
 +
 +
 +
==== Aura Config Tool v1.1.13.0 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool in February 2020
 +
* Supports for Aura Firmware v1.13
 +
* Support new FT Aura 5 product
 +
** Supports new FT Aura features such as Launch Assist, Bank Assist and Level Assist
 +
* Differentiate between Futaba's SBUS channel order and FrSky's Default SBUS channel order
 +
* Add Support for "Stick Relative" Stick Priority that is independent of each Flight Mode's Dual Rate/Expo Settings
 +
 +
 +
==== Aura Config Tool v1.1.12.1 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool in October 2019
 +
* Supports for Aura Firmware v1.11
 +
* Prevent Servo Port S11 or S12 being set as 'PWM Capture' which is not supported by any firmware
 +
 +
 +
==== Aura Config Tool v1.1.11.0 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool in August 2019
 +
* Supports for Aura Firmware v1.11
 +
* Required for use with the Aura Professional series
 +
** Supports new Aura Professional options such as SBUS Diversity, SBUS Output, External Sensor support, and Battery Voltage Monitoring
 +
* Add Jeti EX-Bus Capability
 +
* Allows conversion of Aura Config Files between various products
 +
** For example can convert and Aura 8 QQ Extra 300 configuration to an Aura 12 Professional Open Stock configuration.
 +
* Small Bug Fixes
 +
 +
 +
==== Aura Config Tool v1.1.10.1 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on May 2019
 +
* Small bug fix for Ventique Wizard file creation
 +
 +
 +
==== Aura Config Tool v1.1.10.0 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on April 2019
 +
* Supports for Aura Firmware v1.10
 +
* Required for use with the Mamba 60E.
 +
 +
 +
==== Aura Config Tool v1.1.9.0 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on March 2019
 +
* Supports for Aura Firmware v1.9
 +
* Required for use with the FlexJet TV.
 +
 +
 +
==== Aura Config Tool v1.1.8.2 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2019
 +
* Supports for Aura Firmware v1.8
 +
* Added the CAP-232EX+ Servo Update Helper
 +
 +
 +
==== Aura Config Tool v1.1.8.1 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on January 2019
 +
* Add Support for Aura Firmware v1.8
 +
* Required for use with the RV8.
 +
 +
 +
==== Aura Config Tool v1.1.8.0 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on Nov 2018
 +
* Supports for Aura Firmware v1.6
 +
* Required for use with the QQ Extra 300 G2.
 +
 +
 +
==== Aura Config Tool v1.1.5.0 ====
 +
* Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2018
 +
* Supports for Aura Firmware v1.5
 +
* Required for use with the CAP-232EX and Flex Jet
 +
  
 
==== Aura Config Tool v1.1.4.2 ====
 
==== Aura Config Tool v1.1.4.2 ====
Line 12: Line 181:
 
** Fix to always show Primary Control Mode when viewing the Control Mode tab with Live Data on.
 
** Fix to always show Primary Control Mode when viewing the Control Mode tab with Live Data on.
  
 
=== Previous Releases ===
 
  
 
==== Aura Config Tool v1.1.4.1 ====
 
==== Aura Config Tool v1.1.4.1 ====
Line 22: Line 189:
 
** Add "Aircraft Template" for the new QQ Yak 54 35cc in the New Config File Wizard to easily create the tuned Config File
 
** Add "Aircraft Template" for the new QQ Yak 54 35cc in the New Config File Wizard to easily create the tuned Config File
 
** Updated default save location to My Documents or the previously saved location.
 
** Updated default save location to My Documents or the previously saved location.
 +
  
 
==== Aura Config Tool v1.1.4.0 ====
 
==== Aura Config Tool v1.1.4.0 ====
Line 31: Line 199:
 
** Add feature to create a 'Gyro Kill Switch' via a Transmitter Channel from the Wizard.
 
** Add feature to create a 'Gyro Kill Switch' via a Transmitter Channel from the Wizard.
 
** Add Generic Live Wing to 'New Config File Wizard' for Open Stock Aura.
 
** Add Generic Live Wing to 'New Config File Wizard' for Open Stock Aura.
 +
  
 
==== Aura Config Tool v1.1.3.0 ====
 
==== Aura Config Tool v1.1.3.0 ====
Line 39: Line 208:
 
** Add Live Save functionality for Subtrims and Output Scaling
 
** Add Live Save functionality for Subtrims and Output Scaling
 
** Improve Live Data functionality
 
** Improve Live Data functionality
 +
  
 
==== Aura Config Tool v1.1.1.0 ====
 
==== Aura Config Tool v1.1.1.0 ====
Line 51: Line 221:
 
** Add support for SubTrim in uSec steps
 
** Add support for SubTrim in uSec steps
 
** Introduce Config File Version v1.1
 
** Introduce Config File Version v1.1
 +
  
 
==== Aura Config Tool v1.0.2 ====
 
==== Aura Config Tool v1.0.2 ====
Line 56: Line 227:
 
* Support for Aura Firmware v1.1
 
* Support for Aura Firmware v1.1
 
* Forced any Aura to update from Aura Firmware v1.0 to v1.1
 
* Forced any Aura to update from Aura Firmware v1.0 to v1.1
 +
  
 
==== Aura Config Tool v1.0.1 ====
 
==== Aura Config Tool v1.0.1 ====
Line 67: Line 239:
 
[[File:ACT CheckVersionInfo.gif|none|none|How to Check the Version Info of the Aura Config Tool]]<br>
 
[[File:ACT CheckVersionInfo.gif|none|none|How to Check the Version Info of the Aura Config Tool]]<br>
 
<!-- [[File:ACT_VersionInfo.mp4|600px]] -->
 
<!-- [[File:ACT_VersionInfo.mp4|600px]] -->
 +
 +
<noinclude>[[Category:Aura|Aura]]</noinclude>

Latest revision as of 17:39, 4 August 2023

Aura Config Tool Release Notes

Latest Release

Aura Config Tool v1.1.21.0

  • Update on available on August 4, 2023
  • Support for Aura Firmware v1.21
  • Added Twin Otter 80E configuration to the Aura Config Tool Wizard
  • Improved setup for FrSky and Futaba in Wizard and Setup Tab
    • Improved SBUS Ch Order options for FrSky and Futaba
    • Improved center offset for digital FrSky SBUS setups


Previous Releases

Aura Config Tool v1.1.20.0

  • Beta tested in July 2023 but unreleased due to product timing
  • Support for Aura Firmware v1.20
  • Added RV-8 60E G2 configuration to the Aura Config Tool Wizard
  • Updated Learn Transmitter functionality
    • Added Manual Transmitter Setup that can be configured without needing the Transmitter/Receiver active.
  • Improve Arm/Disarm logic when modifying Transmitter
    • Moved 'Re-Arm' throttle button to top right corner if Aura disarms the throttle for safety during configuration.
  • Add "Wing and Tail Type Wizard" button on Setup tab
    • Can now view and modify the Servo Port configuration on a single view.
  • Added Aileron Differential feature for Aura Firmware v1.20+.
    • Must slide "Aileron Differential Enabled" to ON on the Setup tab
    • Aileron Differential can be configured individually for Left and Right stick movements
    • Differential can scaled proportionally during flight to tune in real time if desired
  • Add "Third Control Mode" option for Aura Firmware v1.20+.


Aura Config Tool v1.1.19.2

  • Update on available on Feb 20, 2023
  • Added Edge 540 120cc configuration to Aura Config Tool Wizard for Open Stock Auras


Aura Config Tool v1.1.19.1

  • Update on available on Dec 8, 2022
  • Added Ultimate 70cc configuration to Aura Config Tool Wizard for Open Stock Auras


Aura Config Tool v1.1.19.0

  • Update on available on June 7, 2022
  • Supports for Aura Firmware v1.19
  • Added QQ Yak55 10e configuration to Aura Config Tool Wizard
  • Added CAP 232EX+ 2022 updated configurations to Aura Config Tool Wizard
  • Added Throttle Input Direction slide switch on Setup tab


Aura Config Tool v1.1.17.3

  • Update on available on Feb 18, 2022
  • FIX: Corrected RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard
    • Corrected Ailerons and Flap Servo Direction values
  • Added Cessna 170 G2 configuration to Aura Config Tool Wizard
  • Added option to enable the Aura Flap system in the Aura Config Tool Wizard
    • Available for Aura Open Stock 'Custom' Airframe types with Flap Wing Types


Aura Config Tool v1.1.17.2

  • Minor Change available on Jan 19, 2022
  • Added RV8 70cc Airframe configuration in Aura Config Tool Open Stock Wizard


Aura Config Tool v1.1.17.1

  • Minor Change available on Dec 23, 2021
  • Enable Aura Flap System for RV8-10 and Open Stock when using latest firmware v1.17


Aura Config Tool v1.1.17.0

  • Minor Change available on October 5, 2021
  • Supports for Aura Firmware v1.17
  • New Config File Wizard updated to support RV8-10


Aura Config Tool v1.1.16.0

  • Minor Change available on May 20, 2021
  • Supports for Aura Firmware v1.16
  • New Config File Wizard updated to support FlexJet G2


Aura Config Tool v1.1.15.0

  • Minor Change available on January 2, 2021
  • Supports for Aura Firmware v1.15
  • New Config File Wizard updated to support Pirana and Mamba 10 G2 6S


Aura Config Tool v1.1.14.2

  • Minor Change available on September 10, 2020 for Mamba 120cc
  • New Config File Wizard updated to include "Mamba 120cc"
    • Select "Mamba 120cc" for the "Airframe Type" of an Open Stock Aura to create the Aura Config File for the Mamba 120cc


Aura Config Tool v1.1.14.1

  • Minor Bug Fix Added on August 17, 2020:
    • Only Allow the Aura Config Tool to set the Receiver to SRXL2 or JR Mode A for firmware v1.14+


Aura Config Tool v1.1.14.0

  • Release available soon via 'Update Aura Config Tool' in Aura Config Tool in August 11, 2020
  • Supports for Aura Firmware v1.14
  • Add SRXL2 Capability for Spektrum SPM4650 and SPM4651T SRXL2 receivers
  • Add JR Mode A Capability
  • Required for use with F-100D Super PNP


Aura Config Tool v1.1.13.0

  • Release available via 'Update Aura Config Tool' in Aura Config Tool in February 2020
  • Supports for Aura Firmware v1.13
  • Support new FT Aura 5 product
    • Supports new FT Aura features such as Launch Assist, Bank Assist and Level Assist
  • Differentiate between Futaba's SBUS channel order and FrSky's Default SBUS channel order
  • Add Support for "Stick Relative" Stick Priority that is independent of each Flight Mode's Dual Rate/Expo Settings


Aura Config Tool v1.1.12.1

  • Release available via 'Update Aura Config Tool' in Aura Config Tool in October 2019
  • Supports for Aura Firmware v1.11
  • Prevent Servo Port S11 or S12 being set as 'PWM Capture' which is not supported by any firmware


Aura Config Tool v1.1.11.0

  • Release available via 'Update Aura Config Tool' in Aura Config Tool in August 2019
  • Supports for Aura Firmware v1.11
  • Required for use with the Aura Professional series
    • Supports new Aura Professional options such as SBUS Diversity, SBUS Output, External Sensor support, and Battery Voltage Monitoring
  • Add Jeti EX-Bus Capability
  • Allows conversion of Aura Config Files between various products
    • For example can convert and Aura 8 QQ Extra 300 configuration to an Aura 12 Professional Open Stock configuration.
  • Small Bug Fixes


Aura Config Tool v1.1.10.1

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on May 2019
  • Small bug fix for Ventique Wizard file creation


Aura Config Tool v1.1.10.0

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on April 2019
  • Supports for Aura Firmware v1.10
  • Required for use with the Mamba 60E.


Aura Config Tool v1.1.9.0

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on March 2019
  • Supports for Aura Firmware v1.9
  • Required for use with the FlexJet TV.


Aura Config Tool v1.1.8.2

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2019
  • Supports for Aura Firmware v1.8
  • Added the CAP-232EX+ Servo Update Helper


Aura Config Tool v1.1.8.1

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on January 2019
  • Add Support for Aura Firmware v1.8
  • Required for use with the RV8.


Aura Config Tool v1.1.8.0

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on Nov 2018
  • Supports for Aura Firmware v1.6
  • Required for use with the QQ Extra 300 G2.


Aura Config Tool v1.1.5.0

  • Release available via 'Update Aura Config Tool' in Aura Config Tool on February 2018
  • Supports for Aura Firmware v1.5
  • Required for use with the CAP-232EX and Flex Jet


Aura Config Tool v1.1.4.2

  • Small Bug Fix Release available via 'Update Aura Config Tool' in Aura Config Tool on March 28, 2017
  • Supports for Aura Firmware v1.4
  • Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
  • Small Software Changes:
    • Update QQ Yak 54 35cc Receiver Type:PWM graphics and labels in New Aura Config File Wizard
    • Fix to always show Primary Control Mode when viewing the Control Mode tab with Live Data on.


Aura Config Tool v1.1.4.1

  • Available via 'Update Aura Config Tool' in Aura Config Tool on March 21, 2017
  • Supports for Aura Firmware v1.4
  • Required for use with the Mamba 10 Aura and QQ Yak 54 35cc in Spring 2017
  • Main Software Changes:
    • Add "Aircraft Template" for the new QQ Yak 54 35cc in the New Config File Wizard to easily create the tuned Config File
    • Updated default save location to My Documents or the previously saved location.


Aura Config Tool v1.1.4.0

  • Available via 'Update Aura Config Tool' in Aura Config Tool on February 22, 2017
  • Support for Aura Firmware v1.4
  • Required for use with the Mamba 10 Aura in Spring 2017
  • Main Software Changes:
    • Add feature to turn Aura Mixes On/Off via a Transmitter 2 or 3 Position Channel Switch.
    • Add feature to create a 'Gyro Kill Switch' via a Transmitter Channel from the Wizard.
    • Add Generic Live Wing to 'New Config File Wizard' for Open Stock Aura.


Aura Config Tool v1.1.3.0

  • Available via 'Update Aura Config Tool' in Aura Config Tool in late August 2016
  • Support for Aura Firmware v1.3
  • Required for use with the Cessna 170
  • Main Software Changes:
    • Add Live Save functionality for Subtrims and Output Scaling
    • Improve Live Data functionality


Aura Config Tool v1.1.1.0

  • Available via 'Update Aura Config Tool' in Aura Config Tool in mid November 2015
  • Support for Aura Firmware v1.2
  • Initially released for the Aura 8 Open Stock in November 2015
  • Main Software Changes:
    • Add support for Open Stock Aura
    • Add Quick Set and Quick Trim features
    • Add for Dual Control Modes per Flight Mode
    • Add support for +/- Output Scales
    • Add support for SubTrim in uSec steps
    • Introduce Config File Version v1.1


Aura Config Tool v1.0.2

  • Available via 'Update Aura Config Tool' in Aura Config Tool in mid August 2015
  • Support for Aura Firmware v1.1
  • Forced any Aura to update from Aura Firmware v1.0 to v1.1


Aura Config Tool v1.0.1

  • Initially released for the QQ Extra 300 Aura 8 in early August 2015
  • Support for Aura Firmware v1.0
  • No longer authorized by Flex Innovations for use. Flex Innovations can only support v1.1+.


How to Check the Aura Config Tool Version

To find the version of the Aura Config Tool, click the Help Menu --> Aura Config Tool Info. The version shown below is not the latest available version, it is only shown as an example.

How to Check the Version Info of the Aura Config Tool