Difference between revisions of "Aura/Glossary"
From Flex Innovations Wiki
(→Aura Definitions) |
(→Aura Definitions) |
||
Line 5: | Line 5: | ||
:A Control Mode is a set of gyro settings that define how the gyro interprets data from the transmitter and the gyro's sensors. Settings can include things like gain and stick priority. | :A Control Mode is a set of gyro settings that define how the gyro interprets data from the transmitter and the gyro's sensors. Settings can include things like gain and stick priority. | ||
;Flight Modes | ;Flight Modes | ||
− | :A Flight Mode is a combination of Control Modes, Dual Rates and Expos that | + | :A Flight Mode is a combination of Control Modes, Dual Rates and Expos that can be selected by a transmitter switch in flight. |
;Gain | ;Gain | ||
:A variable used to adjust how much correction the gyro system will apply for a given movement. The higher the value, the more correction is applied. A zero gain value is no gyro correction | :A variable used to adjust how much correction the gyro system will apply for a given movement. The higher the value, the more correction is applied. A zero gain value is no gyro correction |
Revision as of 15:37, 29 July 2019
This page is a work in progress. Additional terms will continue to be added in the future
Aura Definitions
- Control Modes
- A Control Mode is a set of gyro settings that define how the gyro interprets data from the transmitter and the gyro's sensors. Settings can include things like gain and stick priority.
- Flight Modes
- A Flight Mode is a combination of Control Modes, Dual Rates and Expos that can be selected by a transmitter switch in flight.
- Gain
- A variable used to adjust how much correction the gyro system will apply for a given movement. The higher the value, the more correction is applied. A zero gain value is no gyro correction
- Master Gain
- A way to proportionally adjust or scale the gain up or down via a transmitter channel.
- Output Scale
- Also known as travel adjust, ATV, or servo end points in some radio systems, this variable sets the maximum travel of a servo output port from a stick command.