Difference between revisions of "Cessna170/BuildTips"
From Flex Innovations Wiki
m |
|||
Line 8: | Line 8: | ||
**Quick Set to allow enabling of a Master Gain without a PC | **Quick Set to allow enabling of a Master Gain without a PC | ||
**Support for SPM AR7700 Rx in SRXL mode | **Support for SPM AR7700 Rx in SRXL mode | ||
+ | |||
+ | *When using the new "T" Spektrum Receivers such as the AR8010T, the Aura MUST be updated via Aura Config Tool to Firmware 1.4 to establish connection via SRXL. | ||
*Cessna 170 Manual in [http://www.resources.flexinnovations.com/files/FPM3170.pdf '''English'''] and [http://www.resources.flexinnovations.com/files/FPM3170_German.pdf '''German'''] (coming soon) | *Cessna 170 Manual in [http://www.resources.flexinnovations.com/files/FPM3170.pdf '''English'''] and [http://www.resources.flexinnovations.com/files/FPM3170_German.pdf '''German'''] (coming soon) |
Revision as of 13:59, 26 May 2017
- No assembly tips outside the manual at this time other than the Landing Gear Addendum seen on previous page.
- When programming your Transmitter per the Instruction Manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per page 12 in the Manual. Do NOT put the Aura Configuration Reference settings into the Transmitter.
- Firmware v1.3 offers some enhancements for Cessna Users over previous Aura Firmware's
- Quick Set to allow enabling of a Master Gain without a PC
- Support for SPM AR7700 Rx in SRXL mode
- When using the new "T" Spektrum Receivers such as the AR8010T, the Aura MUST be updated via Aura Config Tool to Firmware 1.4 to establish connection via SRXL.