Cessna 170 PNP Build Tips

From Flex Innovations Wiki

Revision as of 01:26, 29 March 2017 by WikiSys (Talk | contribs) (WikiSys moved page Cessna170PNP/BuildTips to Cessna170/BuildTips: Consistency)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

No assembly tips outside the manual at this time other than the Landing Gear Addendum seen on previous page.

When programming your Transmitter per the Instruction Manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per page 12 in the Manual. Do NOT put the Aura Configuration Reference settings into the Transmitter.

Firmware v1.3 offers some enhancements for Cessna Users over previous Aura Firmware's
- Quick Set to allow enabling of a Master Gain without a PC
- Support for SPM AR7700 Rx in SRXL mode

Cessna 170 Manual in English and German (coming soon)

Retrieved from "https://wiki.flexinnovations.com/index.php?title=Cessna170/BuildTips&oldid=1398"