Difference between revisions of "Cypher/BuildTips"
From Flex Innovations Wiki
(→Key adjustments before first flight for smooth transitions! Set per manual:) |
(→Angle Mode Calibration) |
||
Line 1: | Line 1: | ||
+ | |||
+ | ===Build Tips=== | ||
+ | The manual does not cover installing the wheels on the axles. | ||
+ | *Place a wheel onto the axle | ||
+ | *Apply blue thread lock to the set screw | ||
+ | *Install wheel collar and snug with the included 1.5mm hex driver | ||
+ | <br /> | ||
+ | Page 26, step to should read: | ||
+ | 2. | ||
+ | |||
+ | <br /> | ||
===Angle Mode Calibration=== | ===Angle Mode Calibration=== |
Revision as of 14:25, 9 September 2019
Build Tips
The manual does not cover installing the wheels on the axles.
- Place a wheel onto the axle
- Apply blue thread lock to the set screw
- Install wheel collar and snug with the included 1.5mm hex driver
Page 26, step to should read:
2.
Angle Mode Calibration
Please Calibrate the accelerometer before first flights!
Key adjustments before first flight for smooth transitions! Set per manual:
- Adjust fan angle with gauges for 45 degree/Magic -and- 0 degree/Forward Flight. Adjust hover fan angle.
- Adjust elevon angles with gauge.
- Check CG