Cypher/Configurators
From Flex Innovations Wiki
Revision as of 14:57, 2 October 2019 by FlexTeam (Talk | contribs) (→BetaFlight Configurator For Windows PC)
Contents
Installation and Use of Configurators for Betaflight
Various FV-31 Cypher FLEXF3 settings can be edited using a BetaFlight Configuration Tool. There are several independent config tools to choose from. We use the following ones. Only one configurator install is needed. Multiple links to multiple platforms and versions are provided below.
BetaFlight Configurator For Windows PC
- Typically for Windows 7, 8, or 10 PC you will scroll down and click to install the Asset with the name "betaflight-configurator-installer_<version>_win32.exe".
- Works via Micro USB cable. Versions for Mac OS X and Linux may also be available, though Flex does not test or support these versions.
- CLICK here for installation links for the latest Betaflight Configurator Release
- NOTE: 10.5.1 (V10.51) Betaflight Configurator is known working
- NOTE: We recommend and support the use on PC's of the full installed BetaFlight Application linked above. The Chrome/Chrome Store browser applet is not supported, and is known to have issues.
Speedy Bee Betaflight App for Android
Works via Bluetooth or Micro USB cable (Micro USB requires OTG adapter for most devices)
Speedy Bee Betaflight App for iOS
(Apple Iphone and Ipad). Works via Bluetooth.
- Search for "Speedy Bee" at Apple's App Store Last Flex tested version: 1.2.9
Notes on Use of all Configurators=
- Speedy Bee and Betaflight Configurator interfaces are nearly identical. Common instructions can be used for both platforms.
- General tips on using and troubleshooting your configurator can be found on its Welcome and Documentation & Support pages
- As above, you have two choices to connect your configurator's device to your Cypher's FLEXF3.
- The provided USB Cable connects your Cypher's FLEXF3 to your android device or PC etc.
- Launch your Configurator, Plug in the cable, Hit connect
- Additional power to the Cypher should not be required to make adjustments (powered via USB)
- The provided Bluetooth Dongle for IOS and Android phones and tablets plugs into the white connector next to the USB connector
- Plug in the dongle flat side up then power-up your Cypher with a flight battery.
- Launch the Speedy Bee App and hit the 'Start Scanning' button. Connect to the Flex BT device.
- Settings will load automatically
- Make adjustments
- Remove dongle before flight!
- The provided USB Cable connects your Cypher's FLEXF3 to your android device or PC etc.
- NOTE: There should be no need to go to your devices "Bluetooth Settings". The BLE Dongle should simply work from the APP.