F-100D Super Sabre 90mm EDF Quick Set

From Flex Innovations Wiki
Revision as of 14:22, 10 July 2020 by WikiSys (Talk | contribs) (Created page with "{{DISPLAYTITLE:F-100D Super Sabre 90mm EDF Quick Set}} == F-100D with Aura == The F-100D ships with the Aura 8 Advanced Flight Control System (AFCS) pre-configured and ready f...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

F-100D with Aura

The F-100D ships with the Aura 8 Advanced Flight Control System (AFCS) pre-configured and ready for flight.

The Aura 8 AFCS is a 3 axis gyro, servo hub and channel expander all rolled into one device. We have developed the Aura 8 to be compatible with all major radio brands. You no longer need to spend a fortune, nor be restricted to specific radio types to experience state of the art control. The Aura 8 is designed to enhance the pilots experience, while not interfering with the pilots inputs. Your aircraft will fly as if it were bigger, and in less wind, even though it is as agile as you want it to be.

The Aura 8 - F-100D version ships configured specifically for the F-100D. Our team has spent hours fine tuning the settings for the aircraft to offer you an exceptional feel of accuracy and control.

With the Aura in the F-100D, the transmitter's Aux 2 (CH7) channel changes the Aura's Flight Mode. Each Flight Mode has specific rates, expos, and gyro settings (gains, stick priority, etc) for different maneuvers or flying styles. During flight, you can change the Flight Mode as desired for your flying style or for each type of maneuver you wish to complete.

During development of the F-100D, we wanted to give Expert pilots more options, so we've added the ability to choose your Flight Modes (Stock or Expert) with the Aura's Quick Set feature.

F-100D Quick Set

The Aura 8 has a feature called 'Quick Set' that allows the pilot to change key settings only using their transmitter.

  • Quick Set can only be entered if the Aura is connected to the Receiver by a modern Digital Data connection (such as Spektrum SRXL, Futaba S.Bus, JR Mode B, Graupner HOTT SUMD, Jeti EX-Bus etc.).
  • If you connected the Aura to a Receiver with traditional PWM Servo Connections, you cannot enter the Quick Set feature and must use the Aura Config Tool on the PC.
  • The Aura must be receiving a valid signal from the Receiver to start Quick Set. Make sure the Aura is correctly connected to the Receiver and that the Receiver and Transmitter are bound together.

The F-100D Quick Set feature allows the user to select between two Aura profiles:

  • Stock or Expert
F-100D Flight Modes

F-100D - Stock Flight Modes

The F-100D ships with the 'Stock Flight Modes' as detailed below. These Flight Modes are controlled by your transmitter's Aux 2 (CH7) channel:

  • Flight Mode 1: Gyro Off
    • Rates are set for general flight
    • Exponential is tuned for comfortable flight.
    • Gyro function is completely off
  • Flight Mode 2: Sport
    • For general flight.
    • Rates are low, expo adjusted for smooth flight.
    • Gains are low.
  • Flight Mode 3: High Rates
    • Rates are high and tuned for takeoffs and landings.
    • Exponential is tuned for comfortable flight.
    • Gains are low.

F-100D - Expert Flight Modes

Quick Set can be used to change the RV-8 to use the 'Expert Flight Modes'. There is no 'Gyro Off' flight mode in the Expert Flight Modes, and Aura now uses. The Expert Flight Modes are controlled by your transmitter's Aux 1 (flap or CH6) channel. The expert flight modes are detailed below:

  • Flight Mode 1: Flaps Up, General Flight
    • Flaps up.
    • For general purpose flight
    • Rates are low, gains are low, and expo is tuned for comfortable flight.
  • Flight Mode 2: Takeoff
    • Flaps half
    • For takeoffs
    • Rates are medium, and expo adjusted for smooth flight.
    • Gains are medium.
  • Flight Mode 3: Landing
    • Flaps Full
    • For Landings
    • Rates are high and tuned for landing.
    • Exponential is tuned for comfortable flight
    • Gains are high.

RV-8 - Master Gain (Optional)

Master Gain can be enabled in Quick Set mode. Master Gain allows the pilot to scale the gyro gains up or down in flight using the Ch8/Aux3 channel. Normally this channel is set to a knob for easy adjustment.

Quick Set Procedure

Step 1 - Enter Quick Set mode

  • Make sure all power is off on the RV-8
    • Remove the prop before making changes
  • Turn on your transmitter
  • Remove the Servo lead from Aura Port S2.
  • Put a bind plug in Aura Port S2.
  • Plug in the RV-8 battery to power up the RV-8
  • The LEDs will repeatedly flash Orange 2x to indicate you are in the Quick Set mode. The Green LED will either be on SOLID or FLASH depending on the Gear Channel switch, additional details are below.

Step 2 - Choose Flight Modes

After entering Quick Set mode as described above, you toggle the Gear (CH5) channel switch on the transmitter to choose your flight modes. The Green LED indicates the selected Flight Mode.

  • If the Green LED is on SOLID, the Aura is set to use the Stock Flight Modes.
  • If the Green LED is BLINKING, the Aura is set to use the Expert Flight Modes.

Procedure to change the Aura Flight Modes

  1. Enter Quick Set mode as described above
  2. Use the Gear (CH5) channel switch to select the Stock or Expert Flight Modes.
    • If the Green LED is on SOLID, the Aura is set to use the Stock Flight Modes.
    • If the Green LED is BLINKING, the Aura is set to use the Expert Flight Modes.
  3. After selecting the Flight Modes, remove the bind plug save the settings.
  4. All the LEDs will turn on while the Aura is saving, then will go back to their previous state.
  5. Completely power off the RV-8 and Aura
  6. Replace the Servo Lead in Aura Port S2
  7. Power up and Fly as usual with your new Flight Modes!

Step 3 - Enable/Disable Master Gain (Optional)

Master Gain is turned OFF upon each entry to Quick Set Mode. Master Gain on Ch8/Aux3 can be enabled by sweeping the Ch8/Aux3 knob/slider back and forth. Enabling Master Gain requires a transmitter with at least 8 channels.

  • If the Red LED is on OFF, Master Gain is Disabled.
  • If the Red LED is on ON, Master Gain is Enabled.

Procedure to enable/disable Master Gain:

  1. Enter Quick Set mode as described above
  2. Sweep the Ch8/Aux3 channnel knob/slider back and forth to enable or disable Master Gain.
    • If the Red LED is on OFF, Master Gain is Disabled.
    • If the Red LED is on ON, Master Gain is Enabled.
  3. After selecting Master Gain functionality, remove the bind plug to save the settings.
  4. All the LEDs will turn on while the Aura is saving, then will go back to their previous state.
  5. Completely power off the RV-8 and Aura
  6. Replace the Servo Lead in Aura Port S2
  7. Power up and Fly as usual with your Master Gain enabled!

Quick Set Video