Difference between revisions of "QQYak54 35cc/CompletionItems"
From Flex Innovations Wiki
(Added page/info) |
|||
| Line 3: | Line 3: | ||
=== Electric Setup === | === Electric Setup === | ||
| − | + | ---- | |
'''Motor''' | '''Motor''' | ||
* (1) 200-size Brushless, for 12S Li-Po Batteries | * (1) 200-size Brushless, for 12S Li-Po Batteries | ||
| Line 24: | Line 24: | ||
=== Gas Setup === | === Gas Setup === | ||
| − | + | ---- | |
'''Engine''' | '''Engine''' | ||
* (1) 30-40cc Gasoline Internal Combustion Engine | * (1) 30-40cc Gasoline Internal Combustion Engine | ||
| Line 53: | Line 53: | ||
* 3-Feet (1 meter) Tygon Gas Fuel Tubing (large diameter) | * 3-Feet (1 meter) Tygon Gas Fuel Tubing (large diameter) | ||
| − | === Both Setups === | + | === Both Electric and Gas Setups === |
| + | ---- | ||
| + | '''Receiver''' | ||
| + | * With Aura 8 AFCS | ||
| + | ** Any modern 7-channel Receiver Capable of a Digital Connection (Such as Spektrum SRXL, Futaba S.Bus etc.). Reference the Yak/Aura Setup Wiki: | ||
| + | |||
| + | [http://wiki.flexinnovations.com/wiki/QQYak54_35cc/Aura#Step_5.1.A_-_Modern_Digital_Receiver_Connections Yak 54 35cc and Aura/Receiver Connections] | ||
| + | * Without Aura 8 AFCS | ||
| + | '''Receiver Batteries''' | ||
== Optional Items == | == Optional Items == | ||
* [http://www.flexinnovations.com/QQYak54_35cc This is how you do an external Link] | * [http://www.flexinnovations.com/QQYak54_35cc This is how you do an external Link] | ||
Revision as of 00:04, 23 March 2017
Contents
Completion Items
Electric Setup
Motor
- (1) 200-size Brushless, for 12S Li-Po Batteries
- We recommend the Potenza 200 175kv Motor (FPZM200A)
Speed Controller (ESC)
- (1) 80A HV (12S Li-Po Compatible) ESC with no BEC
- We recommend the Castle Creations Phoenix Edge HV 80 (FPZPHXEDGE80HV)
Motor Batteries
- (2) 6S (22.2V) 3500-4200mAh 40C+ Lithium Polymer Batteries wired in series (for 12S, 44.4V)
- We recommend (2) Potenza 6S 4200mAh 40C Li-Po Batteries wired in series (FPZB42006S40)
Propeller
- Consult your motor/ESC manual for recommendations. Verifying proper current draw may be required.
- We recommend the Falcon 21x10E (FPMPFC2110E) or APC 20x11 for use with the Potenza 200.
Other Accessories
- (1) 12-inch (305mm) Heavy Duty Servo Extension (Throttle/ESC)
Gas Setup
Engine
- (1) 30-40cc Gasoline Internal Combustion Engine
- We recommend the Desert Aircraft DA-35 (FPMDA35)
- (1) Exhaust System that works in conjunction with your engine
- We recommend the Desert Aircraft Pitts-style muffler for the DA-35.
- If you wish to use a tuned pipe or canister, the Yak will accept this exhaust quite easily.
- For the DA-35, we recommend a header drop of 0mm
Ignition Battery
- (1) 2S (7.4V) 1000-2000mAh Lithium Polymer Battery. Verify proper voltages for your particular ignition system!
- We recommend (1) Potenza 2S 1300mAh 25C Li-Po Battery (FPZBR13002S25)
Propeller
- Consult your engine manual for recommendations.
- We recommend the Falcon 20x8 (FPMPFC2008) for use with the DA-35 on a standard Pitts muffler.
Servos
- (1) Standard-size servo (Throttle)
- We recommend (1) DS-222 HV Servo (FPZDS22209HV) for throttle purposes.
- (1) Standard-size servo (Choke)
- We recommend (1) DS-222 HV Servo (FPZDS22209HV)
- This is optional. A mechanical choke linkage is also an option, and the preferred method of actuating the choke
Other Accessories
- (1) 6-inch (150mm) Heavy Duty Servo Extension (Choke, Optional)
- (1) 3-inch (76mm) Heavy Duty Servo Extension (Throttle)
- 3-Feet (1 meter) Tygon Gas Fuel Tubing (large diameter)
Both Electric and Gas Setups
Receiver
- With Aura 8 AFCS
- Any modern 7-channel Receiver Capable of a Digital Connection (Such as Spektrum SRXL, Futaba S.Bus etc.). Reference the Yak/Aura Setup Wiki:
Yak 54 35cc and Aura/Receiver Connections
- Without Aura 8 AFCS
Receiver Batteries
