Difference between revisions of "Ventique60e/BuildTips"
From Flex Innovations Wiki
m |
|||
| Line 3: | Line 3: | ||
*[http://store.flexinnovations.com/s/9712370-_Ventique_Addendum.pdf Addendum] with Building tips. | *[http://store.flexinnovations.com/s/9712370-_Ventique_Addendum.pdf Addendum] with Building tips. | ||
| − | *Aura Installation | + | *Aura Installation Instructions[[File:Ventique Aura 600h.png|thumb|upright=0.5|right|Reinforce the Tray]] |
**Mount the Aura on the Platform behind the wing tube with two-sided tape and a hook-and-loop strap. | **Mount the Aura on the Platform behind the wing tube with two-sided tape and a hook-and-loop strap. | ||
**Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors. | **Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors. | ||
Revision as of 15:59, 6 January 2016
- Addendum with Building tips.
- Aura Installation Instructions
- Mount the Aura on the Platform behind the wing tube with two-sided tape and a hook-and-loop strap.
- Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors.
- The Aura Config File for the Ventique can be easily built in the New Aura Config File "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
- Alternately, you can Download a Ventique .acf file
