Difference between revisions of "Ventique60e/BuildTips"
From Flex Innovations Wiki
m |
m |
||
| Line 7: | Line 7: | ||
**Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors. | **Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors. | ||
**The Aura Config File for the Ventique can be easily built in the ''New Aura Config File'' "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard. | **The Aura Config File for the Ventique can be easily built in the ''New Aura Config File'' "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard. | ||
| − | ***Alternately, you can [[Aura/ConfigFiles| Download a Ventique .acf file]] | + | ***Alternately, you can [[Aura/ConfigFiles#Ventique_60e_Aura_Config_Files_with_Rx_Auto_Detect| Download a Ventique .acf file]] |
| − | + | ||
| − | + | ||
*Link to the manual in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf English] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF German] | *Link to the manual in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf English] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF German] | ||
Revision as of 16:02, 6 January 2016
- Addendum with Building tips.
- Aura Installation Instructions
- Mount the Aura on the Platform behind the wing tube with two-sided tape and a hook-and-loop strap.
- Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors.
- The Aura Config File for the Ventique can be easily built in the New Aura Config File "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
- Alternately, you can Download a Ventique .acf file
