Ventique 60e Build Tips and Aura Install
From Flex Innovations Wiki
- Ventique Addendum with Building tips.
- There have been a couple of reports of the set screws coming loose in the Potenza 60 470kv Motor. During the build, please remove the shaft set screws one at a time from the front bell housing and the rear collar, apply 242 loctite, and tighten them securely.
- Ventique Aura Installation Instructions
- Mount the Aura oriented as shown on the Platform behind the wing tube with two-sided tape and secure with a hook-and-loop strap.
- Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors.
- The Aura Config File for the Ventique can be easily built in the New Aura Config File "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
- Alternately, you can Download a Ventique .acf file