Cessna 170 Build Tips
From Flex Innovations Wiki
- No assembly tips outside the manual at this time other than the Landing Gear Addendum seen on previous page.
- When programming your Transmitter per the Instruction Manual, it is strongly recommended to start with a new 'freshly reset' airplane model memory, then apply the few settings per page 12 in the Manual. Do NOT put the Aura Configuration Reference settings into the Transmitter.
- Firmware v1.3 offers some enhancements for Cessna Users over previous Aura Firmware's
- Quick Set to allow enabling of a Master Gain without a PC
- Support for SPM AR7700 Rx in SRXL mode
- When using the new "T" Spektrum Receivers such as the AR8010T, the Aura MUST be updated via Aura Config Tool to Firmware 1.4 to establish connection via SRXL.
