Difference between revisions of "Aura/FutabaUse"
From Flex Innovations Wiki
m |
(→Futaba S.Bus) |
||
| Line 14: | Line 14: | ||
** Aura will follow the Failsafe outputs of the Futaba Receiver. | ** Aura will follow the Failsafe outputs of the Futaba Receiver. | ||
** Recommended for all aircraft types | ** Recommended for all aircraft types | ||
| − | ** S.Bus Input plugs into Aura Port B (Servo Bus) | + | ** S.Bus Input plugs into standard Aura 8's Port B (Servo Bus). Port A is preferred for Aura Professionals. |
** Precise digital Data | ** Precise digital Data | ||
| − | ** Availability of all 8 Aura Ports as outputs | + | ** Availability of all 8 (or 12) Aura Ports as outputs |
** Receiver ports are also active and available for use | ** Receiver ports are also active and available for use | ||
Revision as of 16:15, 11 June 2019
Contents
Futaba Installation Notes and Equipment Selection
There are two ways to connect the Aura to your Futaba Receiver:
- Futaba S.Bus
- Traditional PWM Servo Connection
NOTE: Any recommendations are based on years of knowledge and product use and are informational only.
- We do not 'specify' radio installations. Consult your radio manufacturer for radio information.
- We test and support the use genuine Futaba brand equipment.
Futaba S.Bus
- Preferred way to connect the Aura to Futaba Receivers
- S.Bus - S.Bus is serial data on one wire (Digital). It gives the Aura knowledge of all of the available Futaba channels.
- Aura will follow the Failsafe outputs of the Futaba Receiver.
- Recommended for all aircraft types
- S.Bus Input plugs into standard Aura 8's Port B (Servo Bus). Port A is preferred for Aura Professionals.
- Precise digital Data
- Availability of all 8 (or 12) Aura Ports as outputs
- Receiver ports are also active and available for use
Traditional PWM Servo Connections
- Least preferred
- Recommended for all aircraft types.
- Supports virtually all receivers
- Limits port availability. Typically Aura will be configured with 4 inputs and 4 outputs with PWM.
