Cypher/Configurators
From Flex Innovations Wiki
Revision as of 19:08, 12 August 2019 by FlexTeam (Talk | contribs) (→Installation and Use of Configurators for Betaflight)
Installation and Use of Configurators for Betaflight
Various FV-31 Cypher FLEXF3 settings can be edited using a BetaFlight Configuration Tool. There are several to choose from. We use the following ones. Only one configurator install is needed. Multiple links to multiple platforms and versions are provided below.
- BetaFlight Configurator For Windows PC
- Typically a Windows 7, 8, or 10 PC will use the Asset with name "betaflight-configurator-installer_<version>_win32.exe".
- Works via Micro USB cable. Versions for Mac OS X and Linux may also be available, though Flex does not test or support these versions.
- CLICK for Latest Betaflight Configurator Release
- NOTE: 10.5.1 (V10.51) Betaflight Configurator is known working
- Speedy Bee Betaflight App for Android. Works via Bluetooth or Micro USB cable (Micro USB requires OTG adapter for most devices)
- Speedy Bee Betaflight App for iOS (Apple Iphone and Ipad). Works via Bluetooth.
- Search for Speedy Bee at Apple's App Store Last Flex tested version: 1.2.9
- Speedy Bee and Betaflight Configurator interfaces are nearly identical. Common instructions can be used for both platforms.
- General tips on using and troubleshooting your configurator can be found on its Welcome and Documentation & Support pages
- As above, you have two choices to connect your configurator's device to your Cypher's FLEXF3.
- The provided USB Cable connects your Cypher's FLEXF3 to your android device or PC etc.
- Launch your Configurator, Plug in the cable, Hit connect
- Additional power to the Cypher should not be required to make adjustments (powered via USB)
- The provided Bluetooth Dongle plugs into the white connector next to the USB connector
- Plug in the dongle then power-up your Cypher with a flight battery.
- Launch the Speedy Bee App and hit the 'Start Scanning' button. Connect to the Flex BT device.
- Settings will load automatically
- There should be no need to go to your devices 'Bluetooth Settings'. The BLE Dongle should simply work from the APP.
- The provided USB Cable connects your Cypher's FLEXF3 to your android device or PC etc.