Difference between revisions of "Ventique60e/BuildTips"
From Flex Innovations Wiki
(UPDATE to smaller PNG... thumb test below does not render) |
|||
| Line 10: | Line 10: | ||
| − | [[File:Ventique Aura | + | [[File:Ventique Aura 600h.png|center]] |
*Link to the manual in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf English] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF German] | *Link to the manual in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf English] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF German] | ||
| − | [[File:Ventique Aura | + | [[File:Ventique Aura 600h.png|thumb|upright=0.4|center|Reinforce the Tray]] |
Revision as of 14:56, 6 January 2016
- Addendum with Building tips.
- Aura Installation Tips-
- Mount the Aura on the Platform behind the wing tube with two-sided tape and a hook-and-loop strap.
- Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors.
- The Aura Config File for the Ventique can be easily built in the New Aura Config File "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
- Alternately, you can Download a Ventique .acf file
