Difference between revisions of "Ventique60e/BuildTips"
From Flex Innovations Wiki
| Line 7: | Line 7: | ||
*Ventique '''Aura Installation Instructions'''[[File:Ventique Aura 600h.png|thumb|upright=0.5|right|Reinforce the Tray]] | *Ventique '''Aura Installation Instructions'''[[File:Ventique Aura 600h.png|thumb|upright=0.5|right|Reinforce the Tray]] | ||
**Mount the Aura oriented as shown on the Platform behind the wing tube with two-sided tape and secure with a hook-and-loop strap. | **Mount the Aura oriented as shown on the Platform behind the wing tube with two-sided tape and secure with a hook-and-loop strap. | ||
| − | **Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have vibration feedback into the gyro sensors. | + | **Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have significant vibration feedback into the gyro sensors. |
**The Aura Config File for the Ventique can be easily built in the ''New Aura Config File'' "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard. | **The Aura Config File for the Ventique can be easily built in the ''New Aura Config File'' "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard. | ||
***Alternately, you can [[Aura/ConfigFiles#Ventique_60e_Aura_Config_Files_with_Rx_Auto_Detect| Download a Ventique .acf file]] | ***Alternately, you can [[Aura/ConfigFiles#Ventique_60e_Aura_Config_Files_with_Rx_Auto_Detect| Download a Ventique .acf file]] | ||
*'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German'''] | *'''Ventique Manual''' in [http://store.flexinnovations.com/s/Ventique_60e_Assembly_Manual_English.pdf '''English'''] and [http://store.flexinnovations.com/s/9712370_German_Manual_V2.PDF '''German'''] | ||
Revision as of 16:10, 9 August 2016
- Please review Ventique Addendum with Building tips.
- There have been a couple of reports of the set screws coming loose in the Potenza 60 470kv Motor. During the build, please remove the shaft set screws one at a time from the bell housing (flange) and the shaft retaining collar, apply 242 loctite, and tighten them securely. Motor instructions with images can be seen here
- Ventique Aura Installation Instructions
- Mount the Aura oriented as shown on the Platform behind the wing tube with two-sided tape and secure with a hook-and-loop strap.
- Fabricate a plywood or balsa diagonal brace from the platform to the former near the floor to stiffen the mounting platform, otherwise, you will have significant vibration feedback into the gyro sensors.
- The Aura Config File for the Ventique can be easily built in the New Aura Config File "Wizard" by selecting the "Aura Config Type: Ventique", and then choosing the other details of your setup in the Wizard.
- Alternately, you can Download a Ventique .acf file
