Difference between revisions of "Aura/JetiUse"

Revision as of 20:29, 19 June 2016

-Draft- Instructions for Using Jeti Duplex Systems with Aura AFCS

Feedback requested. Please send to support@flexinnovations.com

• Click here for a pdf of general instructions notes, and reference material

We strongly recommend starting fresh with our transmitter file for pre-configured setup of the channel data Aura Expects.

• Click here to download and Jeti Transmitter (.jsf) file for a Mode 2 Transmitter (throttle on left)
• Click here to download and Jeti Transmitter (.jsf) file for a Mode 1 Transmitter (throttle on right)

It is recommended that you use the New Aura Config File (Wizard) and create a model file specifically for your model. We do provide these files for Test/Reference however.

• Click here to download an Aura Config File for a typical sport/scale model
• Click here to download an Aura Config File for a typical 3D model

• 3 Flight modes on CH5/Gear (0:Low Rate/Gain Off, 1:Low Rate/Low Gain/Precision, 2:High Rate/High Gain/3D)
• Master Gain is not enabled.
• Downloads:
  • Spektrum Transmitter with Receiver Auto-Detect
  • Futaba Transmitter with Receiver Auto-Detect